• Korea-Australia Rheology Journal
• /
• 제21권4호
• /
• pp.269-280
• /
• 2009

The drop formation dynamics of a shear thinning, elastic, yield stress ($\tau_o$) fluid (Carbopol 980 (poly(acrylic acid)) dispersions) in silicone oil has been investigated in a flow-focusing microfluidic channel. The rheological character of each solution investigated varied from Netwonian-like through to highly non-Newtonian and was varied by changing the degree of neutralization along the poly (acrylic acid) backbone. We have observed that the drop size of these non-Newtonian fluids (regardless of the degree of neutralisation) showed bimodal behaviour. At first we observed increases in drop size with increasing viscosity ratio (viscosity ratio=viscosity of dispersed phase (DP)/viscosity of continuous phase (CP)) at low flowrates of the continuous phases, and thereafter, decreasing drop sizes as the flow rate of the CP increases past a critical value. Only at the onset of pinching and during the high extensional deformation during pinch-off of a drop are any differences in the non-Newtonian characteristics of these fluids, that is extents of shear thinning, elasticity and yield stress ($\tau_o$), apparent. Changes in these break-off dynamics resulted in the observed differences in the number and size distribution of secondary drops during pinch-off for both fluid classes, Newtonian-like and non-Newtonian fluids. In the case of the Newtonian-like drops, a secondary drop was generated by the onset of necking and breakup at both ends of the filament, akin to end-pinching behavior. This pinch-off behavior was observed to be unaffected by changes in viscosity ratio, over the range explored. Meanwhile, in the case of the non-Newtonian solutions, discrete differences in behaviour were observed, believed to be attributable to each of the non-Newtonian properties of shear thinning, elasticity and yield stress. The presence of a yield stress ($\tau_o$), when coupled with slow flow rates or low viscosities of the CP, reduced the drop size compared to the Newtonian-like Carbopol dispersions of much lower viscosity. The presence of shear thinning resulted in a rapid necking event post onset, a decrease in primary droplet size and, in some cases, an increase in the rate of drop production. The presence of elasticity during the extensional flow imposed by the necking event allowed for the extended maintenance of the filament, as observed previously for dilute solutions of linear polymers during drop break-up.

• 한국식품저장유통학회지
• /
• 제13권2호
• /
• pp.125-130
• /
• 2006

중국에서 수확한 대추의 신선도 유지를 위한 목적으로 각각 30, $60{\mu}m$두께의 LLDPE필름, 기능성 MA 필름을 사용하여 이를 대조구와 포장구로 나누어 실온 및 $8^{\circ}C,\;0^{\circ}C$에 10주간 저장하면서 품질변화를 조사하였다. 그 결과 중량은 상온 저장 포장구는 3.6%, 0.4%, 대조구는 36.1% 감소하였고, 저온 저장 대조구에서는 10배 이상으로 나타나 유의적으로 높았다. 산도변화에서는 저장기간 동안 모든 포장구에서 비슷한 경향을 보였으며, 저장 말기에는 포장구가 대조구에 비해 유의적으로 높았다. 또한 총당은 대조구에서 저장 기간중 크게 약 39%증가하였으며, 포장구에서는 약 29.2% 감소하는 경향을 나타내었다. 또한 비타민C의 변화도 대조구와 포장구 모두 감소하는 경향을 보였으나 포장구보다는 대조구에서 다소 높게 유지 되었다. 이에 따라 개발한 필름을 중국산 대추를 수확하여 기능성 MA필름으로 포장하여 활용할 경우 신선도가 유지됨을 확인할 수 있었다.

• Journal of Computational Design and Engineering
• /
• 제1권3호
• /
• pp.187-193
• /
• 2014

One of the hottest challenges in automotive industry is related to weight reduction in sheet metal forming processes, in order to produce a high quality metal part with minimal material cost. Stamping is the most widely used sheet metal forming process; but its implementation comes with several fabrication flaws such as springback and failure. A global and simple approach to circumvent these unwanted process drawbacks consists in optimizing the initial blank shape with innovative methods. The aim of this paper is to introduce an efficient methodology to deal with complex, computationally expensive multicriteria optimization problems. Our approach is based on the combination of methods to capture the Pareto Front, approximate criteria (to save computational costs) and global optimizers. To illustrate the efficiency, we consider the stamping of an industrial workpiece as test-case. Our approach is applied to the springback and failure criteria. To optimize these two criteria, a global optimization algorithm was chosen. It is the Simulated Annealing algorithm hybridized with the Simultaneous Perturbation Stochastic Approximation in order to gain in time and in precision. The multicriteria problems amounts to the capture of the Pareto Front associated to the two criteria. Normal Boundary Intersection and Normalized Normal Constraint Method are considered for generating a set of Pareto-optimal solutions with the characteristic of uniform distribution of front points. The computational results are compared to those obtained with the well-known Non-dominated Sorting Genetic Algorithm II. The results show that our proposed approach is efficient to deal with the multicriteria shape optimization of highly non-linear mechanical systems.

• Steel and Composite Structures
• /
• 제24권3호
• /
• pp.287-296
• /
• 2017

The buckling capacity of a radially retractable hybrid grid shell in the closed position was investigated in this paper. The geometrically non-linear elastic buckling and elasto-plastic buckling analyses of the hybrid structure were carried out. A parametric study was done to investigate the effects rise-to-span ratio, beam section, area and pre-stress of cables, on the failure load. Also, the influence of the shape and scale of imperfections on the elasto-plastic buckling loads was discussed. The results show that the critical buckling load is reduced by taking account of material non-linearity. Furthermore, increasing the rise-to-span ratio or the cross-section area of steel beams notably improves the stability of the structure. However, the cross section area and pre-stress of cables pose negligible effect on the structural stability. It can also be found that the hybrid structure is highly sensitive to geometric imperfection which will considerably reduce the failure load. The proper shape and scale of the imperfection are also important.

• Journal of Ecology and Environment
• /
• 제39권1호
• /
• pp.31-42
• /
• 2016

The object of this study was to determine long-term temporal and spatial patterns of nutrients (nitrogen and phosphorus), suspended solids, and chlorophyll (Chl) in Chungju Reservoir, based on the dataset of 1992 - 2013, and then to develop the empirical models of nutrient-Chl for predicting the eutrophication of the reservoir. Concentrations of total nitrogen (TN) and total phosphorus (TP) were largely affected by an intensity of Asian monsoon and the longitudinal structure of riverine (Rz), transition (Tz), and lacustrine zone (Lz). This system was nitrogen-rich system and phosphorus contents in the water were relatively low, implying a P-limiting system. Regression analysis for empirical model, however, showed that Chl had a weak linear relation with TP or TN, and this was mainly associated with turbid, and nutrient-rich inflows in the system. The weak relation was associated with non-algal light attenuation coefficients (Kna), which is inversely related water residence time. Thus, values of Chl had negative functional relation (R² = 0.25, p < 0.001) with nonalgal light attenuation. Thus, the low chlorophyll at a given TP indicated a light-limiting for phytoplankton growth and total suspended solids (TSS) was highly correlated (R² = 0.94, p < 0.001) with non-algal light attenuation. The relations of Trophic State Index (TSI) indicated that phosphorus limitation was weak [TSI (Chl) - TSI (TP) < 0; TSI (SD) - TSI (Chl) > 0] and the effects of zooplankton grazing were also minor [TSI (Chl) - TSI (TP) > 0; TSI (SD) - TSI (Chl) > 0].

• 대한기계학회논문집
• /
• 제17권1호
• /
• pp.101-111
• /
• 1993

본 연구에서는 제안된 뉴로-퍼지 제어기를 사용하여 유압 서보 시스템을 제어 하고 학습하기 위한 구조로써 유압 서보 시스템의 모델링을 위한 추가적인 노력이 필 요없는 feedback error learning 구조물 채택하였다. 학습 과정에서 필요한 유압 서 보 시스템의 입-출력 사이의 감도(sensitivity)의 효과는 학습 계수에 포함된다. 이 러한 형태의 제어기가 유압 서보 시스템 제어에 유용하게 적용될 수 있다는 것을 보이 기 위해서 불확실성과 높은 비선형성 뿐만아니라 외란의 영향을 받는 유압 서보 시스 템을 대상으로 시뮬레이션을 수행했다. 시뮬레이션 결과에 의하면 제안된 뉴로-퍼지 제어기는 수학적인 모델을 기초로한 기존의 제어 알고리즘에 비해 쉽게 구성할 수 있 고 높은 정밀도, 빠른 학습 속도를 얻을 수 있는 장점을 가지고 있음을 알 수 있다.

• 한국환경농학회지
• /
• 제39권2호
• /
• pp.138-141
• /
• 2020

BACKGROUND: Fresh weight is one of the major quality measurement factors in determining the quality of fresh fruits. A practical method has been developed for rapid and non-destructive measurement using the Chlorophyll Fluorescence Image (CFI) technique to estimate changes in fresh weight of post-harvest products. METHODS AND RESULTS: Kiwifruit (Actinidia deliciosa) was used and measured for the fresh weight and CFI under different temperature conditions at 0, 10, and 20℃, from 0 to 21 days after storage (DAS). We observed the fresh weight of kiwifruit and measured the surface image for determining F_v/F_m value in terms of maximum quantum yield on each day. To estimate freshness of kiwifruit we applied linear regression between the measured fruit weights and F_v/F_m values. Results showed that fruit weights were reduced by 4% at 0℃, 6% at 10℃, and 14% at 20℃ for 21 days, respectively. And also, the value of Fv/Fm was shown as decreasing trend at all temperature conditions, especially at 20 ℃. Fv/Fm values showed highly significant correlation (R²>0.9) with fresh weight of kiwifruit at all different storage temperatures. CONCLUSION: Thus, CFI technique can be useful to estimate the fresh weight of kiwifruit.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1996년도 제11차 KACG 학술발표회 Crystalline Particle Symposium (CPS)
• /
• pp.285-309
• /
• 1996

Non oxide ceramics such as nitrides of transition metals have shown significant potential for future economic impact, in diverse applications in ceramic, aerospace and electronic industries, as refractory products, abrasives and cutting tools, aircraft components, and semi-conductor substrates amid others. Combustion synthesis has become an attractive alternative to the conventional furnace technology to produce these materials cheaply, faster and at a higher level of purity. However he process os highly exothermic and manifests complex dynamics due to its strongly non-linear nature. In order to develop an understanding of this process and to study the effect of operational parameters on the final outcome, numerical modeling is necessary, which would generated essential knowledge to help scale-up the process. the model is based on a system of parabolic-hyperbolic partial differential equations representing the heat, mass and momentum conservation relations. The model also takes into account structural change due to sintering and volumetric expansion, and their effect on the transport properties of the system. The solutions of these equations exhibit steep moving spatial gradients in the form of reaction fronts, propagating in space with variable velocity, which gives rise to varying time scales. To cope with the possibility of extremely abrupt changes in the values of the solution over very short distances, adaptive mesh techniques can be applied to resolve the high activity regions by ordering grid points in appropriate places. To avoid a control volume formulation of the solution of partial differential equations, a simple orthogonal, adaptive-mesh technique is employed. This involves separate adaptation in the x and y directions. Through simple analysis and numerical examples, the adaptive mesh is shown to give significant increase in accuracy in the computations.

• 대한환경공학회지
• /
• 제31권2호
• /
• pp.125-131
• /
• 2009

영가철과 혐기성 미생물을 이용한 환원적 탈염화반응을 통한 다이옥신 처리 능력을 평가하기 위해, 자유에너지 선형관계(linear free energy relationship)를 이용하여 다이옥신의 탈염화에 의한 농도 및 독성변화 예측 모델을 최초로 정립하였다. 수용액상에 존재하는 다이옥신류의 깁스자유에너지는 기존 문헌의 열역학적 계산결과를 범밀도함수이론(density functional theory)을 이용한 계산 수준으로 보정하였으며, 보정된 깁스자유에너지와 실험을 통해 얻은 탈염화 반응속도 상수와의 선형관계를 통해 다이옥신의 탈염화 반응 256개에 대한 반응속도상수를 예측하였다. 본 모델을 통해 탈염화에 의해 변화하는 다이옥신 류 76종에 대한 시간 별 농도를 계산할 수 있다. 8염화다이옥신(Octachlorinated dibenzo-p-dioxin, OCDD)이 완전히탈염화되어 dibenzo-p-dioxin (DD)로 탈염화되기까지는 100년 이상의 반응시간이 필요하였으며, 독성등가값(toxic equivalent quantity, TEQ)의 경우 탈염화가 진행되면서 초기농도의 10배 이상까지 증가하는 것으로 밝혀졌다. 이를 통해, 다이옥신의 처리를 위해서는 좀 더 빠른 탈염화 반응속도를 갖는 다른 전자공여 시스템을 사용하거나, 환원적 탈염화-라디칼 산화와 같은 복합 연계처리가 필요함을 알 수 있다. 본 논문을 통해 제시된 예측 기법은 다이옥신뿐 아니라 다른 할로겐화 화합물의 탈염화 예측과 여러 전자공여 시스템에 대한 평가에 적용이 가능하다.

• Journal of Astronomy and Space Sciences
• /
• 제26권1호
• /
• pp.75-88
• /
• 2009

이 연구의 목적은 선형화 과정이 필요 없는 Unscented 변환(Unscented Transformation)을 사용한 후처리 배치 알고리즘을 소개하고, 기존 최소자승법을 이용한 후처리 배치 필터와 반복 UKF 스무더(Iterative Unscented Kalman Filter Smoother)들과 비교하여 추정 방법 간의 성능비교와 장단점을 분석하는 것이다. 연구에 사용된 위성 궤도 결정시스템의 동역학 방정식은 지구의 비대칭 중력장의 영향, 대기항력, 태양복사압 및 달과 태양의 중력으로 구성되었다. 관측 데이터로는 지상국으로부터 측정한 위성의 거리, 방위각과 고도각이 사용되었다. 특히, 비선형성의 영향에 대한 추정 방법 간의 성능과 장단점의 비교를 위해 위성의 포기 궤도오차별, 관측데이터의 관측 잡음의 크기별 테스트를 수행하였다. 이 연구를 통해 소개된, 선형화 과정이 필요 없는 Unscented 변환 기반의 후처리 배치 필터는, 비선형성의 특징이 증대된 상황에서 기존의 후처리 배치 알고리즘들에 비해 초기 궤도오차별, 관측데이터 잡음의 크기별 테스트 시 평균적으로 각각 약 5%와 12%정도의 정밀도 향상결과를 보였다. 또한, 기존 최소자승법을 이용한 후처리 배치필터가 발산한 상황에서도, 수렴성을 확보하는 안정적인 결과를 얻을 수 있었다. 그러므로 Unscented 변환 기반의 후처리 배치필터가 인공위성 궤도 결정 시스템에 효율적으로 사용할 수 있음을 제시하였다.