• Journal of Korean Society of Rural Planning
• /
• v.3 no.2
• /
• pp.50-61
• /
• 1997

As one of methodological approaches for objective and systematic evaluation for rural resources, a sequential system for significance determination of resources items was formulated using AHP (Analytic Hierarchy Process) as the base technique. By the system constructed in this study, the significance values were calculated for all items of standard goal system which had been presented in the first phase- paper of research works for rural resources evaluation. The results analysed and obtained in the study are summarized as follows; 1. In case that the number of resources items for evaluation are relatively large, stepwise matrix method is considered as the better one for pair-comparison works in view of evaluator's convenience and consistency. 2. The significance valuing results for most resources items showed a considerable difference between characteristic areas, especially in aspects of land and human resources, so being considered as wet reflecting the specific areal varieties, 3. On land resources, the items for industrial development and land use showed higher significance value, while natural environment resources the items for ecological varieties and on human resources the items for artificial facilities. However, lower-valued ones were the items for mineral stocks in land resources, for control and protection in natural environment resources and for lower-level culture heritage respectively.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.13 no.2
• /
• pp.85-95
• /
• 2006

Seveval Chinese and Japanese varieties with good characters were used in the breeding. After 5 years (15 generations), a pair of robust and high quality silkworm variety with NPV resistance was bred by means of a combination of crossing and pedigree selection complemented by the selection of NPV resistance. The variety was identified jointly nationwide in 2003 and 2004, and appraised by National Mulberry and Silkworm Appraising Committee. Results are as follows: its cocooning rate is over 93%, shell rate 23-25%, filament length 1200-1300 meters, reelability 75-88%, Length of non-broken cocoon filament 900-1100 meters, raw silk rate 17-19%, neatness 95-97 points, and cocoon crop, cocoon shell weight and raw silk weight per 10000 larvae is higher than those of the control variety by 7-10%, 14-19% and 14-18%, respectively. The variety is not only robust, resistant to high temperature and NPV, easy to rear, uniform in hatching, molting and maturing, but also lays more eggs, and its fecundity is high. It is suitable to rear in the Yangtze River Basin, the Yellow River basin and the Pearl River basin of China.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.8
• /
• pp.1287-1296
• /
• 1997

The purpose of the study is to make experimental whether three-dimensional body (especially face) has illusion based on theoretical background of form dimensions and color bright among precedent multi-form illusion, using the function of computer simulation. To investigate illusion that factors of clothing design(line, color, material) effect face, as the following is tried to solve giving change to neckline, collar, scarf which is believed to influence near face. How to make experiment as follows watching in order 13 scenes of a pair of with basic design and experiment design. Then the data were subjected to analysis of variance and Duncan's multiple range test. The result of this studying as follows, 1. Face looks larger in complex neckline than simple neckline. The larger collar is the larger face looks. 2. In white jacket, illusion(the lower luminosity of scarf color gets, the brighter face brightness gets) is shown. In black jacket, also illusion(the higher luminosity of scarf color gets, the darker face brightness gets) is shown. 3. In experiment on hardness and softness of face impression according to the material of collar, collar of knit and fur gives us assimilation illusion bring softer impression of face.

• Journal of Microbiology and Biotechnology
• /
• v.5 no.1
• /
• pp.6-13
• /
• 1995

A gene coding for the $\beta$-galactosidase (lactase) of Kluyveromyces tragilis UCD 55-55 was isolated by complementation in Escherichia coli YMC9. From the plasmid library made from Sau3A-digested chromosomal DNA, one positive clone was selected. The cloned gene for $\beta$-galactosidase was on 7.3 kilobase pair DNA fragment, and a slightly low level of $\beta$-galactosidase enzyme activity was detecied in E. coli. It was also confirmed that the cloned gene comes from K. tragilis by DNA-DNA hybridization and immunochemical blotting experiments. In order to construct a new yeast strain having the metabolic ability for lactose, the cloned gene for K. tragilis $\beta$-galactosidase was inserted in yeast vector YEp24 and YRp17, and transformed into Saccharomyces cerevisiae YNN27 and Ml-2B. The yeast transformants showed the nearly the same $\beta$-galactosidase productivity as level of K. tragilis when uninduced, but these could not utilize lactose as a sole carbon source, presumably due to the lack of lactose transport system. Nevertheless, a slightly higher ethanol productivity was achieved by these transformants than S. cerevisiae or K. tragilis, in the medium containing glucose and lactose.

• Journal of Electrochemical Science and Technology
• /
• v.8 no.2
• /
• pp.124-132
• /
• 2017

The performance of electrolytic processes using copper and catalyzed electrodes for enhanced nutrient removal with various catalyzers and combinations of electrodes was evaluated. The catalyzed electrodes removed more ammonia nitrogen than the copper electrode, but higher ammonia removal was achieved using a Pt/Ti anode. On the other hand, electrolysis using the Pt/Cu anode consumed less energy and cost less. During electroreduction, nitrate was better removed by a pair of copper electrodes than by the catalyzed electrodes. During electrolysis of synthetic wastewater, ammonia removal not only increased owing to direct oxidation at the anode, but was also influenced by indirect oxidation at the cathode. Platinum-coated copper and titanium cathodes actively produced oxidizers and thus removed more ammonia than a pure metal cathode. Although phosphorus was removable irrespective of the type of catalyzer, electrocoagulation using the copper electrode achieved complete removal of phosphorus in a period of less than 10 min.

• Proceedings of the SAREK Conference
• /
• 2005.11a
• /
• pp.148-154
• /
• 2005

Ground-source (Geothermal) heat pump (GSHP) systems can achieve a higher coefficient of performance than conventional air-source heat pump (ASHP) systems. However, GSHP systems are not widespread in Japan because of their expensive boring costs. The authors have developed a GSHP system that employs the cast-in-place concrete pile foundations of a building as heat exchangers in order to reduce the initial boring cost. In this system, eight U-tubes are arranged around the surface of a cast-in-place concrete pile foundation. The heat exchange capability of this system, subterranean temperature changes and heat pump performance were investigated in a foil-scale experiment. As a result, the average values for heat rejection were 186${\sim}$201 W/m (for pile, 25 W/m per Pair of tubes) while cooling. The average COP of this system was 4.6 while cooling; rendering this system more effective in energy saving terms than the typical ASHP systems. The initial cost of construction per unit for heat extraction and rejection is ${\yen}$72/W for this system, whereas it is f300/W for existing standard borehole systems.

• Archives of Pharmacal Research
• /
• v.27 no.12
• /
• pp.1290-1294
• /
• 2004

The ${\beta}$-blockers possess at least one chiral center and the S(-)-enantiomer shows higher affinity for binding to the ${\beta}$-adrenergic receptors than antipode. The stability constants of acebutolol, celiprolol, propranolol and terbutaline in the inclusion complexes with single-isomer heptakis (2,3-dimethyl-6-sulfato)- ${\beta}$-cyclodextrin (HDMS-${\beta}$-CD) were determined by capillary electrophoresis. The approximation and linear double reciprocal methods were adapted with comparable results. Among the ${\beta}$-blockers studied, propranolol had the lowest stability constant but the highest enantioselectivity, indicating that the magnitudes of the stability constants carried little information about enantioseparation. The magnitudes of enantioselectivities between the enantiomer pair were in the order of propranolol > celiprolol > terbutaline > acebutolol.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.1
• /
• pp.236-242
• /
• 2014

Isospecific propylene polymerization behavior of meta- and para-Lewis base (E) functionalized unbridged zirconocenes ($[1-(E_n-Ph)-3,4-Me_2C_5H_2]_2ZrCl_2$, E = $NMe_2$, OMe; n = 1 or 2) was investigated under bulk conditions. Catalytic activity of the zirconocenes, and molecular weight and isotacticity of polypropylenes are found to be dependent on the position and number of the Lewis base functional groups in the zirconocenes. All the crude polypropylenes possess a broad molecular weight distribution and multi-melting transitions, indicating an involvement of multi-catalytic active species in the polymerization. The highest [mmmm] value of an isotactic portion of the polypropylenes reached 89%, which is higher than that (85%) from the well-known $C_2$-symmetric EBIZr (rac-$Et(Ind)_2ZrCl_2$) catalyst. These results support that the in situ generated, rigid rac-like cation-anion pair through the Lewis acid-base interactions between the functional groups of zirconocenes and methylaluminoxane anion is effective in the formation of isotactic polypropylene under bulk propylene polymerization conditions.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.2
• /
• pp.79-85
• /
• 2001

A conventional electrolyzing cell has been made by an ion exchange membrane inbetween parallel plate electrodes. A low dc voltage is applied to the electrodes for electrolyzing and the efficiency is remained in low. in this study, a novel electrolyzing cell with a pair of slit-type third electrodes installed inbetween parallel plate electrodes has been proposed and investigated experimentally. And pulse power wa supplied to between each electrodes. This slit type of third electrodes can concentrate the strong electric fields at the every its edges to accelerate the electrolyzing powers, and to generate oxygen bubble discharges for generating oxidants. And moreover the slits eliminate the space charge limiting action and the temperature of the water by leaking out through the slits from electrolyzing region to outside of the main electrode region. As a result, it was found that a strong electorzed water of pH 2.8 and pH 10.5 and oxidants dissolved water of 1 [ppm] in acidic water were obtained with a tap water fed at the electric current of 2 [A], which however were several times higher oxidant and ion concentration quantity compared with the conventional cell.

• ETRI Journal
• /
• v.24 no.3
• /
• pp.221-225
• /
• 2002

We performed nonlinear transmission measurements and quantum-chemical calculations on dithienothiophene(DTT)-based molecules to gain insight into the effect of acceptor and donor groups on two-photon absorption(TPA) properties. The TPA intensity showed dispersion characteristics of the single-photon absorption spectrum. When the molecules included an asymmetric donor-acceptor pair, the single- and two-photon absorption maximum wavelengths were red-shifted more than when the molecules had a symmetric donor-donor structure. We interpreted this result as indicating that the $S_2$ state plays the dominating role in the absorption process of molecules with a symmetric structure. The experimental TPA ${\delta}$ values at the absorption peak wavelength showed a dependence on the structural variations. We found the self-consistent force-field theory and Hartree-Fock Hamiltonian with single configuration interaction formalism to be valid for evaluating TPA ${\delta}$. Although the quantum-chemical calculations slightly underestimated the experimental ${\delta}$ values obtained from nonlinear trans -mission measurements, they reasonably predicted the dependence of the ${\delta}$ value on the structural variations. We confirmed the role of molecular symmetry by observing that donor-donor substituted structure gave the highest experimental and theoretical TPA ${\delta}$ values and that the donor-acceptor substituted structure showed a greater red-shift in the TPA absorption maximum wavelength. Overall, the theoretical ${\delta}$ values of DTT-based molecules were in the order of $10^{-46}\;cm^4{\cdot}s{\cdot}photon^{-1}$ and are higher than that of AF-50 by nearly two orders of magnitude.