• 대한조선학회논문집
• /
• 제40권3호
• /
• pp.54-60
• /
• 2003

Fatigue strength of offshore structures or ship structures is significantly decreased due to corrosive environment condition such as sea water and/or coal, crude oil of cargoes, compared to that of on shore structures. In corrosive environment, fatigue strength of structures also depends on characteristics of weld material heat affected zone(HAZ). In this research work, rotary bending fatigue tests of parent material and HAZ of TMCP steel were performed in order to investigate the initiation and propagation of cracks both in air and in NaCl solution. Comparison of fatigue strength In relation with the salinity of NaCl were carried out as well. According to the test results weld material or HAZ of TMCP steel showed higher fatigue strength than that of the parent material. The fatigue strength of TMCP steel decreases drastically in NaCl solution compared to that of in air environment. In particular, more reduced fatigue strength is observed in 1% NaCl solution than in 3% NaCl solution.

• Journal of Applied Biological Chemistry
• /
• 제61권4호
• /
• pp.383-389
• /
• 2018

Degradation of the insecticide O,O-diethyl O-3,5,6-trichloro-2-pyridyl phosphorothioate (chlorpyrifos) in aqueous solution was investigated using iron salts and potassium persulfate during ZVI treatment through a series of batch experiments. The degradation rate of chlorpyrifos increased with increases in the concentrations of iron salts and potassium persulfate in the aqueous system. Ferric chloride was found to be the most effective iron salt for the ZVI-mediated degradation of chlorpyrifos in aqueous solution. Further, the iron salts tested could be arranged in the following order in terms of their effectiveness: $FeCl_3$> $Fe_2(SO_4)_3$> $Fe(NO_3)_3$. The persulfate-ZVI system could significantly degrade chlorpyrifos present in the aqueous medium. This revealed that chlorpyrifos degradation by treatment with $Fe^0$ was promoted on adding ferric chloride and potassium persulfate. The kinetics of the degradation of chlorpyrifos by persulfate-amended $Fe^0$ was higher than that for iron-salt-amended $Fe^0$. This suggests that using a sequential $Fe^0$ reduction-ferric chloride or $Fe^0$ reduction-persulfate process may be an effective strategy to enhance the removal of chlorpyrifos in contaminated water.

• 원예과학기술지
• /
• 제31권4호
• /
• pp.423-428
• /
• 2013

Although closed soilless culture is useful for saving water and fertilizers with minimizing environmental pollution, adequate management of nutrient solutions is still not stabilized in greenhouse cultivation. In order to investigate the problems occurred in closed soilless culture of Paprika (Capsicum annuum L., cv. Fiesta), we compared ion balance, fruit yield, and the water and fertilizer use efficiencies in the closed system with those in the open system. The plants were grown in rockwool culture with a nutrient solution of EC $2.5dS{\cdot}m^{-1}$. After 4 weeks of treatment, individual ratio of $NO{_3}^-$, $K^+$, $Ca^{2+}$, and $Mg^{2+}$ to total ion concentrations ($meq{\cdot}L^{-1}$) decreased from the initial value, especially the biggest decrement was observed in $K^+$, and on the other hand, $SO{_4}^{2-}$, $Cl^-$, and $Na^+$ were accumulated in the closed system. Yields after four-time harvests were 19% higher in the open system than in the closed system. Total volume of water used per unit area ($m^2$) in the open system was 20% higher, but the total water use per fruit was not significantly different between the two systems, while t total fertilizer use per fruit was 78% higher in the closed system. Amount of marketable fruits was not significantly different between the two systems. We concluded that the increase in $K^+$ supply and the replenishment of recycled nutrient solution every four weeks were required for preventing the imbalance or depletion of nutrients in the close soilless culture of paprika plants to get more balanced nutrient composition during whole cultivation period.

• 한국수산과학회지
• /
• 제36권4호
• /
• pp.340-345
• /
• 2003

In order to choose the manufacturing method for extracting alginates from sea tangle, Laminaria japonica, three methods were applied. In Method I, alginates were extracted with NaOH solution from sea tangle powder and extracted alginates were precipitated and converted to alginic acid by $CaCl_2$ and HCI solution. Then alginic acid was converted to sodium alginates with $Na_2CO_3$ solution. Sodium alginates were precipitated with methyl alcohol and were resolved with hot water and this step was repeated three times. Method II was same to Method I except final step including that sodium alginates were precipitated and washed with methyl alcohol three times. Method III included that sodium alginates were extracted with $Na_2CO_3$ solution from sea tangle powder then sodium alginates were precipitated and washed with methyl alcohol three time. Extracting time increased with Increasing extracted alginates amounts but increasing rates were below $0.4\%/h.$ Alginates amounts recovered by Method III showed above 2 times more to those by Method I and II. Extracting time increased with increasing ash amount of sodium alginates but increasing rates were below $0.1\%/h.$ and that of sodium alginates extracted by Method III showed higher value $(5\%)$ than those by Method I and II. In the sodium alginates prepared by Method III, the amount of ash in alginates dried by air was $34.4\%,$ that by vacuum freeze drying was $47.8\%.$ Extracting time increased with decreasing average molecular weight (MW) and degree of polymerization (DP) of sodium alginates, MW and DP of alginates prepared by Method III were higher than those by Method I and II In same extracting time. Extracting time increased with decreasing rate of apparent viscosity change (SAV) of alginates solution, and SAV of alginates prepared by Method III showed higher value than those by Method I and II in same extracting time. SAV of alginates dried by air was higher than that by vacuum freeze drying. Relating equation among SAV MW and DP were MW = 60.066 (SAV) -93.950, DP =309.760 (SAV) -485.084 and MW = 0.914 (DP)+0.213.

• 한국염색가공학회지
• /
• 제8권3호
• /
• pp.36-51
• /
• 1996

In order to investigate the degradation behavior of PET fabrics, sodium diethylene glycolate (SDEG)-diethylene glycol (DEG) solutions were prepared and PET fabrics were treated in the solution. The dissolution rate constant and apparent activation energy of the PET fabrics were calculated by Eyring's and Arrhenius's equation respectively and measured dyeing properties, moisture and antistatic properties. Then compared SDEG-treated fabrics with NaOH-treated. The results were as follows; 1. PET fabrics decreased their weight in SDEG-DEG solution, and the decreasing rate showed a linear relationship to the treating time at constant temperature and concentration of SDEG-DEG solution. 2. The dissolution rate constant showed a linear relationship to the concentration of SDEGDEG solution and an exponential relationship to treating temperature. 3. Apparent activation energy of dissolution was 23.45 kcal/mol. 4. The K/S values and the ΔL values of fabrics treated with SDEG-DEG solution are higher and lower respectively than fabrics treated with NaOH. 5. SDEG-DEG solution treatment improved fabric's moisture regain and it reached almost maximum at about 40% weight loss. 6. In the both reagent the light, wet and sublimation fastness of fabrics are similar. 7. SDEG-DEG solution gave more electrical discharge effect to the fabrics than that of NaOH. 8. NaOH treated PET microfiber have crater-like surface, while SDEG-DEG solution give bathochromic effect to the PET microfiber because which has wrinkles on the surface.

• 한국유기농업학회지
• /
• 제6권1호
• /
• pp.63-75
• /
• 1997

This study aims to find out the devices to minimize the amount of nitrate ingested from kimchi, the main way of vegetable intake for Koreans, and the basic data to deliver to calculate the total daily intake for Korean, investigating the year-round changes of nitrate content in vegetables for Kimche raw material, and changes of nitrate content by salting of chinese cabbage, and stewed kimchi through the use of different cooking methods. The results obtained were summarized as follow: over between 205-6655mg/kg f.w. in chinese cabbage, 480-3970mg/kg f.w. in chinese radish, 157-5820mg/kg f.w. in lettuce and 29-520mg/kg f.w. in cucumber respectively. Therefore it was strongly adviced to introduce the nitrate limit value of vegetables in Korea if the nitrate content in Kimchi should be reduced to meet the nitrate ADI(Acceptable Daily Intake, 219mg60kg b.w) of FAO.WHO, because the nitrate content in Kimchi reflects the nitrate content in vegetables. In order to keep the low nitrate content in Kimchi. it was adviced to remove the outer leaf which contains 2-3 times higher nitrate content compare to the inner leaf at the time of preparation, i.e. chinese cabbage, before the soaking treatment in salt solution for Kimchi making process. The dehydration by soaking treatment in salt solution occurred at 0.9%~4.7% in leaf midrib and more than 13%~24% in leaf blade. The nitrate content after soaking in salt solution was increased 107%~123% compared with before soaking, increasing rates of nitrate content in the outer and inner leaf midrib were higher than those in leaf blade. The increase of nitrate content in salt solution after soaking due to the dehydration of chinese cabbage by soaking treatment. The Kimchi stew(Kimchi JJige) was processed with and without animal oil, but the amount of nitrate in kimchi stew did not decrease both treatments, but it increased after the processing since the water in Kimchi stew has got low by boiling.

• 농업과학연구
• /
• 제22권2호
• /
• pp.180-187
• /
• 1995

시중에 유통되고 있는 꿀의 진위 여부를 보다 간편한 방법으로 판별하고자, 토종꿀, 아카시아꿀, 밤꿀 및 잡꿀의 4종류의 꿀에 물엿과 설탕 용액의 혼합비를 달리 조제하여, 이의 수분활성도 및 색도 변화를 측정하고, 이를 예측할 수 있는 회귀식을 도출하였다. 시료꿀의 수분 함량은 21% 이하였고, 회분은 0.6%이하였으며, 점도는 420~710cP, 수분 활성도는 0.57~0.62, 당도는 77-80brix의 범위였다. 당액의 첨가량이 많을수록 수분활성도값이 높아졌으며, 물엿보다 설탕 용액의 영향이 더 큰 것으로 나타났다. 물엿의 혼합비가 별꿀의 수분활성도에 미치는 영향을 회귀식으로 도출한 결과 일차방정식을 얻었으며 이때의 $R^2$값은 0.9이상이었다.

• Nuclear Engineering and Technology
• /
• 제46권6호
• /
• pp.847-856
• /
• 2014

Spent resin waste containing a high concentration of $^{14}C$ radionuclide cannot be disposed of directly. A fundamental study on selective $^{14}C$ stripping, especially from the IRN-150 mixed bed resin, was carried out. In single ion-exchange equilibrium isotherm experiments, the ion adsorption capacity of the fresh resin for non-radioactive $HCO_3{^-}$ ion, as the chemical form of $^{14}C$, was evaluated as 11mg-C/g-resin. Adsorption affinity of anions to the resin was derived in order of $NO_3{^-}$ > $HCO_3{^-}{\geq}H_2PO_4{^-}$. Thus the competitive adsorption affinity of $NO_3{^-}$ ion in binary systems appeared far higher than that of $HCO_3{^-}$ or $H_2PO_4{^-}$, and the selective desorption of $HCO_3{^-}$ from the resin was very effective. On one hand, the affinity of $Co^{2+}$ and $Cs^+$ for the resin remained relatively higher than that of other cations in the same stripping solution. Desorption of $Cs^+$ was minimized when the summation of the metal ions in the spent resin and the other cations in solution was near saturation and the pH value was maintained above 4.5. Among the various solutions tested, from the view-point of the simple second waste process, $NH_4H_2PO_4$ solution was preferable for the stripping of $^{14}C$ from the spent resin.

• 환경영향평가
• /
• 제16권5호
• /
• pp.319-325
• /
• 2007

Recently, since the risk on natural disasters is increasing due to abnormal weather such as the global warming, a need for a system on prior review on the influence of disasters has emerged in order to establish a solution by analyzing elements of disaster in advance. However, since the inherently destroying business namely the quarrying business is excluded from the range of subject business of Prior Review System on the influence of disasters, a correction for this is required. In order to actually explore how much risk it contains, actual outflow of soil and flood in the quarrying block where quarrying is being currently carried out was examined and the required undercurrent facility capacity which is also used as a grit chamber was investigated. In addition, by comparing the soil outflow of industrial complexes and golf courses which are current subject businesses of Prior Review on the Influence of Disasters and that of rock mountains relative risk level was examined. After investigation, it was found that the risk on occurrence of disasters was increased due to increase in outflow of soil and flood because of the change of land condition during and after development thus an adequate solution to decrease is required. In addition, after comparison with other business groups it was found that a significantly higher amount of soil is outflown in case of rock mountains thus it was analyzed that a solution to decrease is required. Therefore, a correction is immediately required in order to include quarrying business in the subject business of Prior Review System on the Influence of Disasters.

• Carbon letters
• /
• 제7권3호
• /
• pp.171-179
• /
• 2006

A carbonaceous sorbent was prepared from rice husk via sulphuric acid treatment. After preparation and washing, the wet carbon with moisture content 85% was used in its wet status in this study due to its higher reactivity towards Cr(VI) than the dry carbon. The interaction of Cr(VI) and the carbon was studied and two processes were investigated in terms of kinetics and equilibrium namely Cr(VI) removal and chromium sorption. Cr(VI) removal and chromium sorption were studied at various initial pH (1.6-7), for initial Cr(VI) concentration (100 mg/l). At equilibrium, maximum Cr(VI) removal occurred at low initial pH (1.6-2) where, Cr(III) was the only available chromium species in solution. Cr(VI) removal, at such low pH, was related to the reduction to Cr(III). Maximum chromium sorption (60.5 mg/g) occurred at initial pH 2.8 and a rise in the final pH was recorded for all initial pH studied. For the kinetic experiments, approximate equilibrium was reached in 60-100 hr. Cr(VI) removal data, at initial pH 1.6-2.4, fit well pseudo first order model but did not fit pseudo second order model. At initial pH 2.6-7, Cr(VI) removal data did not fit, anymore, pseudo first order model, but fit well pseudo second order model instead. The change in the order of Cr(VI) removal process takes place in the pH range 2.4-2.6 under the experimental conditions. Other two models were tested for the kinetics of chromium sorption with the data fitting well pseudo second order model in the whole range of pH. An increase in cation exchange capacity, sorbent acidity and base neutralization capacity was recorded for the carbon sorbent after the interaction with acidified Cr(VI) indicating the oxidation processes on the carbon surface accompanying Cr(VI) reduction.