• 한국환경보건학회지
• /
• 제6권1호
• /
• pp.10-21
• /
• 1979

In preventing the infection of Clonorchis sinensis, there is one way in which life cycle of Clonorchis sinensis is cut off by eradicating the first intermediate host viz Parafossarulus manchuoricus, with molluscicides or insecticides. This survey was carried out in order to evaluating the molluscicidal effect of several insecticides upon P. manchauricus. In this survey, diazinon, heptachlor, E.P.N., E.M., and malathion was applied as molluscidies. Those insecticides had been generaly used in farming area. The results are summarized as follows. 1) In molluscicidal effect, E.M. showed the higher molluscicidal effect than any other insecticides in all experiment parts, and the order of insecticides upon molluscicidal effect was that of E.M., E.P.N., heptachlor and malathion. 2) $LD_{50}$ values are varied according to the exposure time in insecticide solution, and the longer the exposure time is, the lower the values of $LD_{50}$ is. 3) To take the exposure time in low concentration of insecticide solution for the long time would obtain the more molluscicidal effect. 4) The mortality rate increases in proportion as the concentration of insecticides increases.

• Advances in aircraft and spacecraft science
• /
• 제9권5호
• /
• pp.463-477
• /
• 2022

This study compares various ways of calculating flows for the problems with the presence of shock waves by first-order schemes and higher-order DG method on the tests from the Quirk list, namely: Quirk's problem and its modifications, shock wave diffraction at a 90 degree corner, the problem of double Mach reflection. It is shown that the use of HLLC and Godunov's numerical schemes flows in calculations can lead to instability, the Rusanov-Lax-Friedrichs scheme flow can lead to high dissipation of the solution. The most universal in heavy production calculations are hybrid schemes flows, which allow the suppression of the development of instability and conserve the accuracy of the method.

• 전기학회논문지P
• /
• 제64권4호
• /
• pp.303-307
• /
• 2015

The effects of additive such as $H_2O_2$ in KOH electrolyte solution for the Aluminum/Air fuel cell were investigated with regard to electric power characteristics. The power generated by a Al/Air fuel cell was controlled by the KOH electrolyte solution and $H_2O_2$ depolarizer. Higher cell power was achieved when higher KOH electrolyte concentration and higher $H_2O_2$ depolarizer amount. The maximum power was increased by the increase amount $H_2O_2$ depolarizer, it was found that $H_2O_2$ depolarizer inhibits the generation of hydrogen and the polarization effect was reduced as a result. Internal resistance analysis was employed to elucidate the maximum power variation. Higher internal resistance created internal potential differences that drive current dissipating energy. In order to improve the output characteristics of the Al/Air fuel cell, it is thought to be desirable to increase the KOH electrolyte concentration and increase the $H_2O_2$ addition amounts.

• 생물환경조절학회지
• /
• 제26권3호
• /
• pp.227-234
• /
• 2017

본 연구는 딸기 '매향'의 양수분 흡수율을 고려하여 개발한 배양액을 검증하고자 이온 조성이 다른 5종 배양액으로 8개월 동안 수경재배하면서 생육과 수량에 미치는 영향을 조사하였다. 2015년 9월 22일 코이어 고설베드에 딸기 묘를 정식하고 1개월 후 다섯 종류의 배양액 농촌진흥청 딸기 배양액(RDA), 야마자키 딸기 배양액(Yamazaki), PBG 딸기 배양액(PBG), 서울시립대 딸기 배양액(UOS) 및 새로 개발된 서울시립대 딸기 배양액(NewUOS)을 사용하여 EC $1.0dS{\cdot}m^{-1}$, pH 6.0으로 1일 주당 150~300mL 공급하였다. 정식 60일 후 엽폭, 엽병장은 배양액 종류에 차이를 보였으며, 광합성은 RDA와 NewUOS 배양액 처리에서 높았고, PBG 배양액 처리에서 낮았다. 영양생장기 배액의 EC는 공급수준보다 낮은 EC $0.7{\sim}0.8dS{\cdot}m^{-1}$, 이후는 EC $1.0{\sim}1.2dS{\cdot}m^{-1}$로 안정되었다. 배액 pH는 Yamazaki 배양액 처리에서 6.2~6.8로 높은 반면, UOS 배양액은 5.1~5.2로 낮았다. 영양생장기 배액의 무기이온은 질산태 질소의 흡수가 가장 활발하였으며, 화방전개 이후 칼륨 흡수가 NewUOS, UOS 및 Yamazaki 배양액 처리에서 높았다. 정식 6개월 후 지상부와 지하부 생체중과 건물중은 UOS와 NewUOS 배양액에서 높았으며, 지상부 건물율은 Yamazaki 배양액에서 43.5%로 낮았으며, 지하부 건물율은 NewUOS배양액에서 30.6%로 낮았다. 12월부터 2월까지 수확된 딸기의 과장, 과폭, 과중, 당도는 배양액 차이에 의한 유의성은 없으나, NewUOS 배양액에서는 주당 과수와 평균 과중이 높아 수량이 높았다. 3월부터 5월까지 Yamazaki 배양액에서 수확된 딸기는 주당 과수와 수량이 높았다. 따라서 이온 조성 차이에 따른 배양액 5종으로 수경재배하였을 때 '매향'의 생육은 차이를 보이지 않았으나, 시기별 상품성 향상을 위해 정식 후 ~ 2월까지는 NewUOS 배양액을, 고온과 화방당 착과량이 많아지는 3월 이후에는 Yamazaki 배양액으로 재배하는 것이 적합하리라 본다.

• Advances in nano research
• /
• 제4권3호
• /
• pp.229-249
• /
• 2016

In this paper, buckling characteristics of nonhomogeneous functionally graded (FG) nanobeams embedded on elastic foundations are investigated based on third order shear deformation (Reddy) without using shear correction factors. Third-order shear deformation beam theory accounts for shear deformation effects by a parabolic variation of all displacements through the thickness, and verifies the stress-free boundary conditions on the top and bottom surfaces of the FG nanobeam. A two parameters elastic foundation including the linear Winkler springs along with the Pasternak shear layer is in contact with beam in deformation, which acts in tension as well as in compression. The material properties of FG nanobeam are supposed to vary gradually along the thickness and are estimated through the power-law and Mori-Tanaka models. The small scale effect is taken into consideration based on nonlocal elasticity theory of Eringen. Nonlocal equations of motion are derived through Hamilton's principle and they are solved applying analytical solution. Comparison between results of the present work and those available in literature shows the accuracy of this method. The obtained results are presented for the buckling analysis of the FG nanobeams such as the effects of foundation parameters, gradient index, nonlocal parameter and slenderness ratio in detail.

• Nuclear Engineering and Technology
• /
• 제43권6호
• /
• pp.531-546
• /
• 2011

The backward differentiation formula (BDF) method is applied to a three-dimensional reactor kinetics calculation for efficient yet accurate transient analysis with adaptive time step control. The coarse mesh finite difference (CMFD) formulation is used for an efficient implementation of the BDF method that does not require excessive memory to store old information from previous time steps. An iterative scheme to update the nodal coupling coefficients through higher order local nodal solutions is established in order to make it possible to store only node average fluxes of the previous five time points. An adaptive time step control method is derived using two order solutions, the fifth and the fourth order BDF solutions, which provide an estimate of the solution error at the current time point. The performance of the BDF- and CMFD-based spatial kinetics calculation and the adaptive time step control scheme is examined with the NEACRP control rod ejection and rod withdrawal benchmark problems. The accuracy is first assessed by comparing the BDF-based results with those of the Crank-Nicholson method with an exponential transform. The effectiveness of the adaptive time step control is then assessed in terms of the possible computing time reduction in producing sufficiently accurate solutions that meet the desired solution fidelity.

• 생물환경조절학회지
• /
• 제4권1호
• /
• pp.43-49
• /
• 1995

양액재배에서 제주송이가 다른 배지와 비교하여 방울토마토의 수량 및 품질에 미치는 영향과 양액성분 변화를 조사하여 제주송이를 양액재배용 고형배지로 실용화하기 위하여 시험한 결과는 다음과 같다. 1. 건엽비, 건과비, 당산비는 1익㉣ 1회 1시간 담액후에 완전 배액한 구에서 높았다. 2. 방울토마토 생과중은 상위 화방으로 갈수록 암면구와 담액수경구는 작아졌으나, 송이구와 일향토구, 펄라이트구 등 고형배지경에서 무거웠다. 3. 방울토마토의 생육이 왕성한 시기에 양액성분중 다량원소를 분석한 결과는 송이 재배구에서 인산과 칼륨 농도가 낮았다. 4. 방울토마토의 수량과 당도는 암면과 일향토구에서 높은 경향을 보였다. 5. 일반적으로 양액재배에서는 수분의 증발과 식물의 수분 흡수 증산작용으로 비료염의 농도가 높아가는데 송이구도 다른 고형배지경과 비슷한 결과를 보였다. 6. 제주 송이 양액재배용 고형배지로 손쉽게 이용할 수 있는 가벼운 자재로 가공개발 연구가 있어야 할 것으로 본다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권2호
• /
• pp.1100-1123
• /
• 2019

A code-based cryptosystem can resist quantum-computing attacks. However, an original system based on the Goppa code has a large key size, which makes it unpractical in embedded devices with limited sources. Many special error-correcting codes have recently been developed to reduce the key size, and yet these systems are easily broken through side channel attacks, particularly differential power analysis (DPA) attacks, when they are applied to hardware devices. To address this problem, a higher-order masking scheme for a McEliece cryptosystem based on the quasi-dyadic moderate density parity check (QD-MDPC) code has been proposed. The proposed scheme has a small key size and is able to resist DPA attacks. In this paper, a novel McEliece cryptosystem based on the QD-MDPC code is demonstrated. The key size of this novel cryptosystem is reduced by 78 times, which meets the requirements of embedded devices. Further, based on the novel cryptosystem, a higher-order masking scheme was developed by constructing an extension Ishai-Sahai-Wagne (ISW) masking scheme. The authenticity and integrity analysis verify that the proposed scheme has higher security than conventional approaches. Finally, a side channel attack experiment was also conducted to verify that the novel masking system is able to defend against high-order DPA attacks on hardware devices. Based on the experimental validation, it can be concluded that the proposed higher-order masking scheme can be applied as an advanced protection solution for devices with limited resources.

• 한국염색가공학회지
• /
• 제14권4호
• /
• pp.214-222
• /
• 2002

In order to give a silk-like touch to PET fabrics, the PET fabrics were treated with NaOH alkaline solution in various conditions. In alkaline treatment, the liquor flow type pilot weight reduction apparatus with magnetostrictive ultrasonic transducer was used for the study. The weight loss of PET fabrics hydrolyzed in 4% and 6% NaOH solution, at $95^\circ{C}$ and $99^\circ{C}$ for 60min. with ultrasonic application showed 3.7~4.6% higher than that of treated fabric without ultrasonic application. From the difference of specific weight loss, the treatment condition of the maximum of hydrolyzation effect appeared at $95^\circ{C}$ in $4^\circ{C}$ and at $90^\circ{C}$ in 6% NaOH solution, respectively. During the alkali hydrolysis of PET fabrics, the decomposition rate constant(k) increased exponentially with the treatment temperature and were not related with ultrasonic cavitation. The activation energy$(E_a)$ in decomposition of PET fabrics were 21.06kcal/mol with ultrasonic application and 21.10kcal/mol without ultrasonic application. The ultrasonic application gave a little higher value of the activation entropy$(\Delta{S}^\neq)$ and a little lower value of Gibbs free energy$(\Delta{S}^\neq)$ compared with not used ultrasonic apparatus.

• 대한치과기공학회지
• /
• 제27권1호
• /
• pp.19-25
• /
• 2005

Ti6Al4V alloy have been mainly used as implant materials. Ti-6Al-4V alloy instead of pure Ti is being widely used as biomaterials has some characteristics such as high fatigue strength, tensile strength. But it has been reported recently that vanadium component expresses cytotoxicity and carcinogenicity and aluminium component is related with dementia of Alzheimer type. In order to overcome their detrimental effects, $\beta$-phase stabilizer Nb was chosen in the present study, in addition Ta and Hf were added to Ti-40wt.%Nb alloy to improve its mechanical properties. This paper was described the influence of heat treatment of Ti-40Nb alloys with 2wt%Ta, 2wt%Hf on the mechanical properties. Specimens of Ti alloys were melted in vacuum arc furnace and homogenized at 1050$^{\circ}C$ for 24 hr. and then were aged after solution heat treat at $\alpha+\beta$ and $\beta$ regions. The mechanical properties of Ti alloys were analysed by hardness test, tensile test, elongation test and SEM test. The results can be summarized as follows: 1. The mechanical properties Ti-40wt.%Nb were improved when 2wt.% Ta and 2wt.%Hf were added. 2. The higher tensile strength value and elongation at solution heat treat was higher than solution heat treat and then were aged.