• Journal of Environmental Science International
• /
• v.22 no.3
• /
• pp.281-289
• /
• 2013

For the purpose of evaluating the eco-efficiency(EE) on surplus heat generated from industrial process, techniques of life cycle assessment are adopted in this study. Because it can be indicated both environmental impacts and economic benefits, EE is well known as a useful tool for symbiosis network on the sustainable development of new projects and businesses. To evaluate environmental impacts, the categories were divided into two areas of resource depletion and global warming potential. It can be seen that environmental impact increased a little but much higher economic benefit on the company, environmental performance and economic value were improved on the apartment by the district heating, respectively. In result, eco-industrial park(EIP) project on surplus heat should be found sustainable new business because the EE was in the area of fully positively eco-efficiency and, moreover resource depletion was taken place than the reduction of greenhouse gas.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.6 no.3
• /
• pp.175-181
• /
• 1994

This paper deals with the correlation of absorption rate in absorber and evaporation rate in evaporator. The evaporator consists of a copper tube of 10mm dia, and 600mm long and chilled water flowing through the tube is fed by the chilled water circulator. The flowrate of LiBr-water solution in the absorber plays a significant role in determining the magnitude of the heat transfer rate from chilled water to refrigerant There exists a flowrate of solution which has a maximum value of heat transfer. It is interesting to note that the absorption rate of absorber increases with increasing the heat transfer rate of the evaporator. Also, absorption rate increases with evaportation rate, and the ratio(the former/the other) depends on the inlet temperature of LiBr-water solution in the absorber. The heating capacity in the absorber is higher than the refrigerating capacity in the evaporator.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.5
• /
• pp.440-450
• /
• 2009

In case of wood flooring, the high emissivity would be one of the most important properties especially as the cover material of underfloor heating system. The FIR (Far Infrared) materials such as wood emit FIR energy by heating, which has been used as the medical therapy such as dry sauna. This research investigated the emissivity and the emission power of wood composites by comparing the amount of the three heat transfer modes transferred by infrared radiation which came from the increased temperature of the bottom board of the plywood box by the heater. The results showed the value of radiation mode was the highest mode for the plywood box, and the convection mode was the main mode for the aluminum box. The rate of convection was 81.8% in the aluminum box and 48.2% in the plywood box, respectively. In case of the rate of radiation, the aluminum box showed only 15.4% and the plywood box showed 51%. The emissivity and the emission power of birch plywood showed the same values as those of wood. The amount of energy required for the temperature rising of water within vial in the aluminum box and in the plywood box were 3.32 kJ and 6.70 kJ respectively, which showed that the vial temperature of the plywood box was two times higher than that of the aluminum box.

• Food Science of Animal Resources
• /
• v.18 no.3
• /
• pp.209-215
• /
• 1998

Effects of protein concentration, ionic strength, pH, and temperature range on the heat-induced denaturation of salt soluble protein extracted from spent layer meat were investigated. Viscosity of salt soluble protein heated at 65$^{\circ}C$ for 30 min began to increase sharply above 7 mg/ml of breast protein concentration, and above 21 mg/ml of leg protein concentration, respectively. Both turbidity and viscosity showed the highest value in cooked protein solution with pH 6.0 and 1% NaCl. The turbidity of salt soluble protein started to increase continuously from 40$^{\circ}C$ to 80$^{\circ}C$. The viscosity increased rapidly from 45$^{\circ}C$ to 60$^{\circ}C$ in breast protein, and increased from 50$^{\circ}C$ to 55$^{\circ}C$ in leg protein, respectively, and then kept relatively constant. Breast protein had higher viscosity than leg protein during heat-induced gelation. Therefore, salt soluble protein from spent layer meat was associated with denatured protein (turbidity change) prior to gelation (viscosity change) during heating. Breast protein showed lower thermal transition temperature, and better gel formation than leg protein during heating.

• The Korean Journal of Food And Nutrition
• /
• v.15 no.3
• /
• pp.203-208
• /
• 2002

The physicochemical and sensory properties of Campbell Early and Gerbong juices prepared by various pressing methods were studied. The yields of these juices by mixed method were 83.5% and 87.5%, the highest value of various pressing methods. And soluble solids and amino nitrogens of them decreased as heating temperature increased and was lowest when mixed method was performed. Titratable acidities of Campbell Early juice was 0.86∼1.00%, higher than that of Gerbong juice, 0.60~o.69%. Also the strength of astringent taste and sour taste of Campbell Early and Gerbong juice increased as heating temperature increased, and increased strength of these tastes gave good sensory evaluation to grape juices.

• Korean Journal of Food Science and Technology
• /
• v.32 no.5
• /
• pp.1149-1157
• /
• 2000

To confirm the factors concerning color changes of traditional kochujang, heating, U.V. and $N_2$ gas substitution treatment were conducted on duk(rice cake) kochujang and shikhae(malt digested syrup) kochujang. The value of L, a and b value by Hunter of each kochujang were gradually decreased during fermentation and ${\delta}E$ increased. The ${\delta}E$ value of duk kochujang treated by U.V. was higher than those of the other treatments and non heated shikhae kochujang showed higher ${\delta}E$ value. The main cause of color change by factor analysis on various factors of duk kochujang and shikhae kochujang were light, and light and heat respectively. The acetone and water extracted pigments had maximum absorbance at 450-470 nm and 200-205 nm respectively.

• Journal of Advanced Marine Engineering and Technology
• /
• v.16 no.5
• /
• pp.97-110
• /
• 1992

Rape-seed oil has high viscosity and high rubber content like other vegetable oils. When crude rape-seed oil obtained by a general oil extraction process is used in a diesel engine, automization condition during injection is not good and a large amount of combustion product is doposited in a combustion chamber. The improvement of a diesel engine is required to use rape-seed oil as a diesel engine fuel. In this study, the physical and chemical properties and combustion characteristics of rape-seed oil were investigated. The auxiliary aid was developed to improve automization condition and the effect of the auxiliary injection aid on the performance of a diesel engine was determined. The results are as follows. 1) Oil content of rape-seed is 45%. The exraction rate is 33%. The resuls show higher values compared to those of other vegetable oils. 2) The viscosity of rape-seed oil is 50.8 cSt and nearly 14 times of diesel oil viscosity. 3) The heating value and flash point of rape-seed oil are 9720kcal/Kg and 318$^{\circ}C$, respectively. 4) In case rape-seed oil is used as fuel, brake horse power, specific fuel consumption and brake thermal efficiency are compared to those of diesel oil. The results of rape-seed oil show 3.6%, 12.7% and 3.1% higher values. 5) Particle size of injection fuel with the auxiliary injection aid on the performance of a diesel engine was determined. The results are as follows. 1) Oil content of rape-seed is 45%. The extraction rate is 33%. The results show higher values compared to those of other vegetable oils. 2) The viscosity of rape-seed oil is 50.8 cSt and nearly 14 times of diesel oil viscosity. 3) The heating value and flash point of rape-seed oil are 9720kcal/Kg and 318.deg.C, respectively. 4) In case rape-seed oil is used as fuel, brake horse power, specific fuel consumption and brake thermal efficiency are compared to theose of diesel oil. The results of rape-seed oil show 3.6%, 12.7% and 3.1% higher values. 5) Particle size of injection fuel with the auxiliary injection aids is 100.mu.m smaller than that od injection fuel without the aid. 6) Brake horse power and brake thermal efficiency with the auxiliary injection aid increase 5.07% and 6.07%, respectively. However, specific fuel consumption decreases 3.85% with the auxiliary injection aid.

• Journal of Energy Engineering
• /
• v.19 no.4
• /
• pp.221-227
• /
• 2010

In this study, we consider gas generation characteristics on pyrolysis of eco-fuel which were made by mixing of Pitch Pine and Lauan sawdust as biomass and polyethylene, polypropylene, polystyrene as municipal plastic wastes with catalyst in fixed bed reactor. From the result of higher heating value(HHV) measurement and of ultimate analysis, the heating value of plastic wastes and a hydrogen content in plastic sample are higher than biomass. An activation energy was reduced by a catalyst addition. However the catalyst content influence over 5 wt% was insignificant. The yield of hydrogen from gasification of biomass containing plastic wastes such as polyethylene, polypropylene and polystyrene were obtained higher than that of sole biomass. The high temperature and mixture ratio of catalyst conditions induced to high hydrogen yield in most of the samples. As the influence of catalyst, the hydrogen yield by catalytic reaction was higher than non-catalytic reaction. We confirmed that Ni-$ZrO_2$ catalyst is more active in increasing the hydrogen yield in comparison with that of carbonate catalyst. The maximum hydrogen yield was 65.9 vol.%(Pitch Pine / polypropylene / 20 wt.% Ni-$ZrO_2$(1:9) at $900^{\circ}C$).

• Journal of Animal Science and Technology
• /
• v.64 no.2
• /
• pp.380-395
• /
• 2022

This study investigated the utilization of detoxified Rhus verniciflua (RV) extract as a natural antioxidant to extend the shelf life of chicken breast meat during storage. Pre-heating at (35℃, 100℃, 120℃, and 140℃) was conducted on heartwood of RV prior to extraction to improve its antioxidant activity and remove the allergenic compound urushiol. The antioxidant activity was the highest when RV pre-heated at 120℃ with the 2,2-diphenyl-1-picrylhydrazyl (DPPH) and azinobis-3-ethylbenzothiazoline-6-sulfonic acid (ABTS) scavenging activity observed at 62.29 EC₅₀ ㎍/mL and 12.11 IC₅₀ mg/mL, respectively. Pre-heating also significantly increased the total phenolic content (TPC), with the highest improvement was seen at 120℃, 100℃, and 140℃ respectively, wherein 35℃ shared no difference with the raw RV (RRV). Urushiol content was vanished following pre-heating at 120℃ and 140℃. With respect to these result, pre-heating treatment at 120℃ was applied before the extraction of the heartwood of RV. Prepared breast meat sample was dipped into distilled water as a negative control, 0.02% butylated hydroxytoluene (BHT) as positive control, and a solution containing detoxified RV extract (0.10%, 0.25%, 0.50%, 1.00%) at 4℃ for 60 min. Treatment group with 0.50% and 1.00% addition increased the redness and yellowness value on day 6 and day 3 of storage respectively (p < 0.05). The pH value of breast meat was also increased in treatment of 0.50% and 1.00% on day 0, but subsequently lower until end of storge day compared to control negative (p < 0.05). Furthermore, 0.50% treatment exhibited a higher antioxidant activity, stronger inhibition of the microbial growth evaluated by total viable count and maintaining a lower total volatile basic nitrogen among treatments (p < 0.05), unless for BHT and 1.00% treatment groups (p > 0.05). It indicates a similar efficacy of detoxified RV extract with that of positive control treated with BHT. The results of this study suggested that dipping chicken breast meat into a solution containing 0.50% of previously pre-heated RV heartwood at 120℃ could be a promising natural antioxidant for extending the shelf life, and at the same time improve its quality during storage.

• Food Engineering Progress
• /
• v.14 no.3
• /
• pp.193-201
• /
• 2010

The aim of this study was to analyse the quality of Yukwa puffed by using a vacuum puffing machine and compare to deep-fried Yukwa. The effect of vacuum puffing condition including heating temperature(100-${160^{\circ}C}$), preheating time(0-8 min) and vacuum puffing time(5-20 min) on physical and microstructure characteristics of the Yukwa was investigated. Vacuum puffed Yukwa at ${100^{\circ}C}$ heating temperature, 6 min preheating time and 10 min puffing time had highest value in volumetric expansion ratio(10.04) and lowest value in bulk density(0.15 g/$cm^{3}$). The breaking strength showed the lowest value of 140 g/$cm^{3}$ in vacuum puffing Yukwa at ${100^{\circ}C}$ heating temperature, 6 min preheating time and 15 min puffing time. The Yukwa puffed with the vacuum puffing machine at ${100^{\circ}C}$ heating temperature, 6 min preheating time and 15 min puffing time had the higher value of bulk density and the lower value of volumetric expansion ratio than those of deep-fried Yukwa. Increasing preheating time and vacuum puffing time caused an increase in white and an decrease in yellowness. The vacuum-puffed Yukwa exhibited smaller and uniform cell structure, while deep-fried Yukwa exhibited apparently in larger pores inside and smaller pores near the surface layer. The optimum condition of vacuum puffing machine for the production of vacuum-puffing Yukwa was ${120^{\circ}C}$ heating temperature, 4 min preheating time and 5 min puffing time.