• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.87-96
• /
• 2020

To use a hydraulic structure effectively, the velocity of a river should be known in detail. In reality, velocity measurements are not conducted sufficiently because of their high cost. The formulae to yield the flux and velocity of the river are commonly called the Manning and Chezy formulae, which are empirical equations applied to uniform flow. This study is based on Chiu (1987)'s paper using entropy theory to solve the limits of the existing velocity formula and distribution and suggests the velocity and distance formula derived from information entropy. The data of a channel having records of a spot's velocity was used to verify the derived formula's utility and showed R2 values of distance and velocity of 0.9993 and 0.8051~0.9483, respectively. The travel distance and velocity of a moving spot following the streamflow were calculated using some flow information, which solves the difficulty in frequent flood measurements when it is needed. This can be used to make a longitudinal section of a river composed of a horizontal distance and elevation. Moreover, GIS makes it possible to obtain accurate information, such as the characteristics of a river. The connection with flow information and GIS model can be used as alarming and expecting flood systems.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.22 no.2
• /
• pp.135-146
• /
• 2020

In the strawberry cultivation areas and domestic farms, two-spotted spider mites are the most serious pests. It decreases the product yield due to the direct feeding of chlorophyll by the mites resulting in reduced photosynthetic ability of host plant. In this study, a simplified acaricidal effect evaluation system (SAEES) was employed to choose the effective acaricidal products among 10 items based on leaf-dipping bioassay methods. SAEES had the advantage of being able to screen four commercial products with three replications at the same time in the recommended concentration. The susceptible strains (SL_YS) showed a high mortality rate of about 90-100%, whereas the mortality of local strains was differed by each acaricides. It suggests that the acaricide responses of field populations might differ due to spray frequencies and acaricide product. An efficacy index (0.8-1.0) was determined based on the mortality of susceptible strain, which would allow the most effective commercial products to be selected by the range of this index. In summary, SAEES will enable the selection of effective commercial products and contribute to increasing control against T. urticae in strawberries.

• Journal of Bio-Environment Control
• /
• v.31 no.4
• /
• pp.325-331
• /
• 2022

One of the most important factors in predicting tomato growth and yield is the leaf area. Estimating leaf area accurately is the beginning of an effective tomato plant growth assessment model. To this end, this study was conducted to identify the most effective model for estimating plant leaf area through the measurement of tomato plant leaves. Leaf area (LA), leaf length (L), leaf width (W), and lamina length (La) were measured for all leaves of 5 plants at two-week intervals. The correlation between LA and tomato-leaf-independent variables showed a strong positive relationship with the formulas La × W, L × W, La + W, and L + W. For LA estimation, a linear model using the formula LA = a + b (La² + W²) gave the most accurate estimation (R² = 0.867, RMSE = 88.76). After examining the positions of upper, middle, and lower leaves from September to December, the coefficient of determination (R²) values for each model were 0.878, 0.726, and 0.794 respectively. The most accurate estimation came from the model that used the upper leaves of the plants. The high accuracy of the upper-leaf-based model is judged by the 50% defoliation performed by farmers after October.

• Resources Recycling
• /
• v.31 no.4
• /
• pp.12-18
• /
• 2022

Korea depends on the import of raw materials such as iron ore and coal for the steel industry. These raw materials have a major impact on the cost, productivity, and quality competitiveness in the global steel industry. To secure the competitiveness of steel companies, it is necessary to reduce the country's dependence on raw materials. This can be achieved using byproducts with a high Fe content, which are primarily generated by the steel industry. These byproducts are available in the form of a very fine powder, which can disperse as dust when used directly in plant processes. Dust dispersion has a negative impact on the environment and can lead to the loss of raw materials. To enable the use of a wide range of Fe-containing byproducts, it is necessary to pretreat them in the form of larger aggregates such as pellets and briquettes. There are several methods to achieve such aggregates. There are two ways to produce briquettes: using a hot briquette, which supplies additional heat to produce briquettes, or using a cold briquette, which does not use heat. A method for producing cold briquettes using Fe-containing byproducts was investigated in this study. The yield ratio and briquette strength were examined under various manufacturing conditions.

• Applied Chemistry for Engineering
• /
• v.33 no.3
• /
• pp.309-314
• /
• 2022

Carbon dots (CDs) are few nanometer-sized carbon-based nanoparticles and emerging candidate materials in various fields such as biosensors and bioimaging due to their excellent optical properties and high biocompatibility. However, most CDs, emitting blue light, have limited their application in biomedical fields due to the low penetration of short-wavelength lights into the biological system. Therefore, there has been enormous need to develop long-wavelength emitting CDs. In this study, red-emitting CDs were successfully synthesized through the hydrothermal reaction of p-phenylenediamine with hydrochloric acid. In addition, the effect of the amount of hydrochloric acid on the formation of carbon dots, resulting in the variation of the chemical structures of CDs, were investigated, which was confirmed with the intensive structural analyses using infrared and X-ray photoelectron spectroscopy. It was found that the chemical structure of CDs governed their optical properties and quantum yield. Therefore, this study provides an insight into the role of acid in forming red-emitting CDs as the optimal probe for biomedical application.

• Journal of Mushroom
• /
• v.19 no.4
• /
• pp.279-284
• /
• 2021

Flammulina velutipes is the representative edible mushroom in Korea. It makes up around 18% of the total mushroom production and accounts for about 36% of the total mushroom export. Despite being one of the most industrially important mushroom in Korea, the distribution rate of domestic cultivar was low (~31.6%) in 2020. Therefore, we need a new domestic cultivar with high quality as the main export mushroom. We developed a new white domestic cultivar, 'Seolhan', bred by mating two monokaryotic strains isolated from Baekseung and Woori-1ho. The optimum mycelial growth temperature was 25℃ and Seolhan had higher mycelial growth than the control at 20 and 25℃. In bottle cultivation, the optimum temperature of incubation was from 15℃ to 17℃ and the growth temperature of Seolhan was 7-8℃, which was slightly higher than that of the control. The yield of Seolan was 226.5±8.0 g, an increase of 18.4% compared to the control. The period of primodia formation also was a couple of days ahead. In morphological traits, the pileus of Seolhan was smaller than that of the control, the stipe was thicker, and the color brighter. As the results of replacement culture and genetic diversity test, it was confirmed that Seolhan was genetically different from other white varieties.

• Journal of Conservation Science
• /
• v.38 no.2
• /
• pp.109-116
• /
• 2022

This study identified Korean red pine (Pinus densiflora) and exotic pines (Pinus resinosa, Pinus sylvestris) with a similar anatomical structure using a dendro-anatomical method that applied dendrochronology, tracheid length, and uniseriate ray cell size. Korean red pine samples were collected from 13 national parks, while exotic pine samples were secured from two wood importers. Tracheid length was measured by distinguishing earlywood from latewood, and uniseriate ray height and cell number were determined. As the exotic pine tree-ring chronology was consistent with the foreign standard tree-ring chronology and displayed high statistical significance, the country and region where the pine samples had been felled and the exact felling date were confirmed. According to the results, which compared tracheid length and uniseriate ray size, no difference was observed between the Korean red and Russian pines. However, the tracheid length of the Russian pines turned out to be slightly longer than the length of the Korean red pine. Additional research securing a larger number of exotic pines (P.resinosa, P.sylvestris) is required to yield more accurate results in the future.

• Journal of People, Plants, and Environment
• /
• v.23 no.6
• /
• pp.655-665
• /
• 2020

Background and objective: This study was conducted to compare the cultivation environment, growth of cut flowers, and management performance of conventional farms and smart farms growing the standard cut chrysanthemum, 'Jinba'. Methods: Conventional and smart farms were selected, and facility information, cultivation environment, cut flower growth, and management performance were investigated. Results: The conventional and smart farms were located in Muan, Jeollanam-do, and conventional farming involved cultivating with soil culture in a plastic greenhouse, while the smart farm was cultivating with hydroponics in a plastic greenhouse. The conventional farm did not have sensors for environmental measurement such as light intensity and temperature and pH and EC sensors for fertigation, and all systems, including roof window, side window, thermal screen, and shading curtain, were operated manually. On the other hand, the smart farm was equipped with sensors for measuring the environment and nutrient solution, and was automatically controlled. The day and night mean temperatures, relative humidity, and solar radiation in the facilities of the conventional and the smart farm were managed similarly. But in the floral differentiation stage, the floral differentiation was delayed, as the night temperature of conventional farm was managed as low as 17.7℃ which was lower than smart farm. Accordingly, the harvest of cut flowers by the conventional farm was delayed to 35 days later than that of the smart farm. Also, soil moisture and EC of the conventional farm were unnecessarily kept higher than those of the smart farm in the early growth stage, and then were maintained relatively low during the period after floral differentiation, when a lot of water and nutrients were required. Therefore, growth of cut flower, cut flower length, number of leaves, flower diameter, and weight were poorer in the conventional farm than in the smart farm. In terms of management performance, yield and sales price were 10% and 38% higher for the smart farm than for the conventional farm, respectively. Also, the net income was 2,298 thousand won more for the smart farm than for the conventional farm. Conclusion: It was suggested that the improved growth of cut flowers and high management performance of the smart farm were due to precise environment management for growth by the automatic control and sensor.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.6
• /
• pp.262-269
• /
• 2021

This paper conducts an evaluation of the structural performance of the lap splice detail of SD700 headed bar experiment for developing an RC beam with different depths joint details. The experiment variable is lap splice length, yield strength, and end anchorage of main reinforcements. For all specimens, a headed bar was applied to the main reinforcement of the beam with low depth (B2), and the beam with high depth (B1) was applied to the main reinforcement with two splice methods: straight headed bar and 90° hooked-headed bar. The experimental results were that specimens of applying SD500 and SD600 had the results of flexural fracture at the lap splice location, which maximum load was similar. For specimens of appling SD500, the 90° hooked-headed bar of B1, suppressed horizontal cracks in the lap splice section compared to the straight headed bar. Specimens of applying an SD 700 headed bar had the results of brittle anchorage failure. In addition, maximum load was increased with the lap splice length increasing. For specimens of applying SD700 headed bar, test for test maximum load/theoretical load for test development length/design development length were estimated to be 1.30~1.48 for the ACI 318-19 equation, and 1.14~1.30 for the KDS-2021 equation. Thus, ACI 318-19 equation had conservatively greater safety factors as estimated development lengththened.

• Applied Chemistry for Engineering
• /
• v.33 no.2
• /
• pp.126-132
• /
• 2022

Alkaline fuel cells using liquid fuels such as hydrazine and ammonia are gaining great attention as a clean and renewable energy solution possibly owing to advantages such as excellent energy density, simple structure, compact size in fuel container, and ease of storage and transportation. However, common shortcomings including cathode flooding, fuel crossover, side yield reactions, and fuel security and toxicity are still challenging issues. Real time monitoring of fuel concentrations integrated into a fuel cell device can help improving fuel cell performance via predicting any loss of fuels used at a cathode for efficient energy production. There have been extensive research efforts made on developing real-time sensing platforms for hydrazine and ammonia. Among these, recent advancements in electrochemical sensors offering high sensitivity and selectivity, easy fabrication, and fast monitoring capability for analysis of hydrazine and ammonia concentrations will be introduced. In particular, research trend on the integration of metallic and metal oxide nanoparticles and also their hybrids with carbon-based nanomaterials into electrochemical sensing platforms for improvement in sensitivity and selectivity will be highlighted.