• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.820-824
• /
• 1997

In order to investigate the effect of surface treatment(Anodizing) and rolling in Al 5083-H131 alloy, ballistic testing was conducted. Ballistic resistance of these materials. was measured by protection ballistic limit(V$_{50}$), a statical velocity with 50% probability for incomplete penetration. Fracture behaviors and ballistic tolerance, described by penetration modes, are observed respectfully, resulting from V$_{50}$ test and Projectile Through Plates(PTP) test at velocities greater than V$_{50}$. PTP tests were conducted with 0$^{\circ}$obliquity at room temperature were also conducted with projectiles that were able to achieve near or complete penetration during PTP tests. Resistance to penetration, and penetration modes of Al 5052-H34 alloy, compared to those of Al 5083-H131 alloy.alloy.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.1104-1109
• /
• 1991

Recently, Pneumatic Actuation System (PAS) has been used increasingly as a high performance fin-control servo actuation systems because of the special advantages of pneumatic units: primarily their low cost, small size, light weight, and tolerance to broad temperature extremes. In this study, a nonlinear model of PAS is derived through the detailed analysis of the major components in the typical system. The model includes nonlinear flow-pressure relationships of the flow through the solenoid valve openings and orifices, PWM algorithm for driving two solenoid valves as a closed-center 3-way valve for minimum gas consumption, solenoid valve dynamics, saturation, and friction. Simulation results are compared with the experimental ones for square and sinusoidal inputs to see the validity of the model. Independent of the shape and magnitude of the input signals, both results are in good agreements with minor difference.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.5 no.1
• /
• pp.53-56
• /
• 2000

A thermostable esterase from the hyper thermophilic archaeon Sulfolobus solfataricus was partially purified 590-fold with $16.2\%$ recovery. The partially purified esterase had a specific activity of $29.5\;{\mu}mol\;min^{-1}mg^{-1}$ when the enzyme activity was determined using p-nitrophenyl butyrate as a substrate. The apparent molecular weight was about 100 kDa, while the optimum temperature and pH for esterase were $75^{\circ}C$ and 8.0, respectively. The enzyme showed high thermal stability and solvent tolerance in comparison to its mesophilic counterpart. The enzyme also showed chiral resolution activity for (S)-ibuprofen, indicating that S. solfataricus esterase can be used for the production of commercially important chiral drugs.

• Journal of Microbiology and Biotechnology
• /
• v.13 no.2
• /
• pp.309-312
• /
• 2003

A bacterial strain NB01, isolated from wastewater, was found to utilize nitrobenzene (NB) as the sole source of nitrogen, carbon, and energy. The strain was classified as a member of a high G+C Gram-positive group and identified as Mycobacterium chelonae based on an analysis of its 16S rRNA gene sequence. The strain grew on NB with a concomitant release of about 63% of the total available nitrogen as ammonia, suggesting a reductive degradation mechanism. The optimal pH and temperature for degradation were PH 7.0-8.0 and $30^{\circ}C$, respectively. The cell growth was retarded at NB concentrations above 1.8 mM. The degradation of NB followed Michaelis-Menten kinetics within the tolerance range, and the $K_m$ and maximum specific removal rate for NB were 0.33 mM and $11.04\;h^{-1}$, respectively.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.1
• /
• pp.28-34
• /
• 2013

For the senses of beauty and texture, internal components of small passenger cars are manufactured by texturing plastic with drawplate but those of deluxe passenger cars are manufactured by bonding pre-embossed skin to the surface of drawplate. As the pre-embossed skin is bonded at high temperature and pressure, the pattern of skin is distorted. The corner part is hardened and its dimension tolerance is changed by resulting in the increase with its defective rate. This study provides the method to design and manufacture the door trim track by vacuuming the non-patterned skin to upper-side drawplate which forms the pattern of descending skin. It is pressed to the plastic product with hot-press method and the damage of bossed-pattern is prevented. Valuation in this study has been done by analyzing, designing and experimenting method.

• International Journal of Precision Engineering and Manufacturing
• /
• v.4 no.4
• /
• pp.45-50
• /
• 2003

In order to investigate the effect of surface treatment (Anodizing) and rolling on AI 5083-H131 alloy, under hyper velocity impact, a ballistic testing was conducted. Ballistic resistance of these materials was measured by a protection ballistic limit ($V_{50}$)' a statistical velocity with 50% probability of penetration. Perforation behavior and ballistic tolerance, described by penetration modes, were respectfully observed, by $V_{50}$ test and Projectile Through Plates (PTP) test at velocities greater than $V_{50}$. PTP tests were conducted with 0$^{\circ}$ obliquity at room temperature using 5.56mm ball projectiles. $V_{50}$ tests with 0$^{\circ}$ obliquity were also done with projectiles that were able to achieve near or complete penetration during PTP tests. Resistance to penetration, and penetration modes of Al 5052-H34 alloy were compared to those of Al 5083-H 131 alloy.

• Korean Journal of Food Science and Technology
• /
• v.21 no.6
• /
• pp.832-837
• /
• 1989

It has been suggested that medium chain fatty acid(MCFA) may be toxic to yeast and bacteria and thus play a role in the inhibition of alcoholic and malolactic fermentations and also important contributors to wine flavour We measured, by the use of GLC, the concentrations of octanoic, decanoic and dodecanoic acids produced by 12 wine yeast strains during the alcoholic fermentation of a grape juice-like medium. In general, there was a high production of MCFA at first, dropping dramatically later. The formation of MCFA is largely dependent on yeast strain but it also depends upon temperature, sugar concentration, stirring and carbon dioxide sparging.

• Korean Journal of Microbiology
• /
• v.26 no.3
• /
• pp.256-261
• /
• 1988

Samples from Naktong Estuary had been taken for the characterization of heterotrophic bacterial communities and of the effects of environmental factors on their distribution in estuarine ecosystem. Bacterial communities isolated from seawater region were composed of more euryhalone groups than those from freshwater region, and the bacterial communities of summer were composed of more eurythermal groups than those of winter. Bacterial commnities became more diverse by the input of allochthonous bacteria from terrestrial and freshwater ecosystem, but less diverse by worse environmental conditions such as nutrient load, high salinity, low temperature, and so on.

• Food Science and Biotechnology
• /
• v.17 no.6
• /
• pp.1160-1164
• /
• 2008

An novel amylolytic yeast, Saccharomyces cerevisiae HA 27, isolated from nuruk, displayed resistance against high sugar (50% glucose) and alcohol (15%). Maximal production of amylolytic enzyme by S. cerevisiae HA 27 was achieved on 9 days of cultivation at the optimal temperature $20^{\circ}C$ and pH 6.0. The activity of amylolytic enzyme produced by S. cerevisiae HA 27 was stable, even at $70^{\circ}C$, and over a broad pH range (4.0-11.0). Also, the amylolytic enzyme of S. cerevisiae HA 27 showed optimal activity in pH 5.0 at $50^{\circ}C$. S. cerevisiae HA 27 exhibited 6.2%(v/v) alcohol fermentation ability using starch as a carbon source.

• Horticultural Science & Technology
• /
• v.30 no.6
• /
• pp.626-634
• /
• 2012

There are variations among grapevine genotypes in the levels of tolerance to cold, and cold-hardiness of grapevine has been affected by the change of short-term environment during over-wintering. In this study, the responses of vines to cold in open field and rain-shelter system were investigated to obtain useful information in increasing the tolerance to cold in grape cultivation. Total carbohydrate content of bearing mother branches was higher in the rain-shelter system than in the open field, and lower in the branches of 'Muscat Bailey A' than in 'Campbell Early' and 'Kyoho'. Bud-burst and shoot growth were better in the rain-shelter system than in open field, whereas there is no significant difference among the treatments of net beside vines. There was also low incidence of gray mold in rain shelter system. Stilbene compounds such as t-piceid, resveratrol, piceatannol, c-piceid were accumulated in the cold-treated shoot from vine cuts harvested in rain shelter system. Genes of chalcone isomerase, manganese superoxide dismutase, proline rich protein 2, and temperature induced lipocalin were highly expressed in the cold-treated shoot from vine cuts harvested in rain shelter system. While there was not change of air temperature, but high reduction of wind speed in the rain shelter system compared to open field, and increase in the reduction of wind speed by net treatment. The damage of grapevines by cold in the extreme low temperature could be reduced by keeping them in the rain shelter system with net during winter season.