• Applied Biological Chemistry
• /
• 제34권2호
• /
• pp.168-173
• /
• 1991

벼 유묘에 의 한 $Mn^{+2}$(Mn-SOD의 cofactor)의 흡수는 유묘조직중 SOD 활성을 증가시킴과 아울러 유묘의 냉해저항성을 현저히 향상시키는 결과를 보였으며, SOD 활성 증가정도와 냉해 저 항성 향상정도간에는 정의 상관관계가 있었다. 이에 반하여, Fe-SOD와 Cu/Zn-SOD의 cofactor들인 $Fe^{+3},\;Cu^{+2},$ 및 $Zn^{+2}$의 흡수는 조직내 SOD활성이나 식물의 냉해저항성에 어떤 유의성 있는 영향도 미치지 않았다. 이러한 결과들이 시사하는 바는 아마도 superoxide에 의해 유도되고 $Mn^{+2}$의 존재에 의해 활성화된 Mn-SOD가 (최소한 벼의 경우에는) 저온 스트레스에 대항하는 생체방어 시스템의 중요한 子성분일 것이라는 점이다. 어느정도의 냉해억제효과가 있다고 인정된 Abscisic acid의 처리도 벼 유묘조직의 SOD 활성을 증가시켰다. 이 관찰결과도 식물의 냉해 유발상황 하에서 세포내 SOD가 담당하는 중요한 생체방어 역할을 부각시키는 또 하나의 정보를 제공한 것이다.

• 한국농림기상학회지
• /
• 제8권2호
• /
• pp.61-67
• /
• 2006

내음성정도가 서로 다른 두 수종 먼나무와 붓순나무를 대상으로 높은 광도조건인 자연상태와 낮은 광도 조건인 비음 처리구로 나누어, 두 수종간의 적응 반응을 비교하였다. 두 수종의 묘목을 처리구에서 각각 1년간 비음처리하였을 때, 엽록소함량과 광합성계, 엽육세포내 $CO_2$농도, 수분이용효율의 특성을 조사하였다. 엽록소 함량은 두 수종모두 자연조건(full sunlight)일 때, 비음처리구에 비하여 낮은 엽록소 함량들(Chl a, Chl b, Chl a+b)을 나타냈으며, 붓순나무에서 특히 자연조건과 비음 처리구간의 엽록소 함량의 차이가 크게 나타났다. 한편, 중용수인 먼나무는 PPFD $1000\;{\mu}mol\;m^{-2}s^{-1}$ 이상 일 때, 자연조건(full sunlight)에서 높은 광합성율과 높은 수분이용효율을 보였지만, PPFD $1000\;{\mu}mol\;m^{-2}s^{-1}$ 이하에서는 비음처리구에서 자연조건에 비해 더 높은 광합성율과, 수분이용효율을 나타냈다. 이에 반해 붓순나무는 모든 광도에서 비음처리를 하지 않은 묘목이 비음처리를 한 묘목에 비해 낮은 광합성율과 수분이용효율을 나타냈다. 먼나무가 탄력적으로 광도변화에 따라 유동성 있는 반응을 보이는 것에 비해 내음성이 강한 붓순나무는 광환경 변화에 따른 민감성이 낮게 나타나는 것을 알 수 있었다.

• Journal of Microbiology and Biotechnology
• /
• 제24권5호
• /
• pp.619-628
• /
• 2014

To identify lipase LipA (PFL_0617) from Pseudomonas protegens Pf-5, a lipA deletion mutant (Pf0617) and a complementary strain (Pf0617lipA) were constructed, and their effects on the lipase production were examined. Pf0617 remarkably decreased its whole-cell lipase activity, whereas Pf0617lipA made its whole-cell lipase activity not only restore to wild-type level but also get a further increment. However, the deletion and overexpression of lipA did not affect the extracellular lipase activity. In addition, the unbroken whole cells of these strains were able to catalyze the hydrolysis of membrane-permeable p-nitrophenyl esters, but could not hydrolyze the membrane-impermeable olive oil. These results confirmed that LipA was an intracellular lipase and Pf-5 could also be used as a natural whole-cell biocatalyst. To evaluate the potential of Pf-5 as a whole-cell biocatalyst and separately characterize the whole-cell LipA, the properties of the whole-cell lipases from Pf-5 and Top10lipA were characterized. The results demonstrated that both Pf-5 and Top10lipA exhibited high tolerance to alkaline condition, high temperature, heavy metal ions, surfactants, and organic solvents. Taken together, lipA can realize functional expression in E. coli Top10, and Pf-5 and Top10lipA as whole-cell biocatalysts may have enormous potential in applications.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.267-272
• /
• 2003

In order to investigate the effect of face material on Ti/Al alloy laminates under high velocity impact, a ballistic testing was conducted. Ballistic resistance of these materials was measured by protection ballistic limit($V_{50}$), a statistical velocity with 50% probability penetration. Fracture behaviors and ballistic tolerance, described by penetration modes, were respectfully observed, by $V_{50}$ test and Projectile Through Plates (PTP) test at velocities greater than $V_{50}$. PTP tests were conducted with $0^{\circ}$obliquity at room temperature using 5.56mm ball projectile. $V_{50}$ tests with $0^{\circ}$obliquity were also done with projectiles that were able to achieve near or complete penetration during PTP tests. Resistance to penetration, and penetration modes which face material was Titanium alloy, were compared to those which face material was anodized Al alloy after cold-rolling.

• 한국미생물·생명공학회지
• /
• 제30권4호
• /
• pp.425-429
• /
• 2002

Saccharomyces cerevisiae KNU5377 was examined to assay the recovering capacity against heat and other stressors. Along with a particular fermentation ability that is able to produce ethanol even at high temperature such as $40^{\circ}C$ with a comparable rate to the fermentation at $33^{\circ}C$, this strain also exhibited higher viability than a reference strain owing to its own thermotolerance that conferred the survival after the severe heat shock at $60^{\circ}C$ for 30 minutes. Furthermore, this strain showed outstanding tolerances against $H_2O_2$, ethanol and some chemical compounds. But, especially due to the thermotolerance, this strain has been suspected of other species of yeast. However, ITS (internally transcribed spacer) 1 and 2 sequencing data confirmed this strain was a typical strain of S. cerevisiae. The outstanding tolerances to various environmental stressors Indicate this S. cerevisiae KNU5377 is enough to use both as an on-site potential strain for world-wide alcohol fermentation industry and as a model strain for researches into the routes to acquire the tolerance to various stressors.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.153-153
• /
• 2017

Potato (Solanum tubersosum L.) is susceptible to various environmental stresses such as frost, high temperature, and drought. Enhancement of potato drought tolerance can reduce yield loss under drought that has negative effect on potato tuber growth. Genetic engineering can be utilized to achieve this goal, but such approaches using endogenous potato genes have rarely been applied. Since unpredictable global weather changes cause more severe and frequent water limiting conditions, improvement of potato drought tolerance can minimize such adverse effects under drought and can impact on sustainable potato production. Genetic engineering can be utilized to improve potato drought tolerance, but such approaches using endogenous potato genes have rarely been applied. We were obtained AtbZIP28 gene transgenic potato plants. It is identified transcript levels at various stress conditions, polyethylene glycol (PEG), NaCl, abscisic ${\underline{acid}}$ (ABA). Also, For identification to regulate ER stress response genes in AtbZIP28 gene transgenic potato plant, we screened seven potato genes from RNA-seq analysis under TM treatment. Five and two genes were up- and down-regulated by TM, respectively. Their expression patterns were re-examined at stress agents known to elicit TM, DTT, DMSO and salt stress.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1231-1234
• /
• 2003

A sensor working in outdoor may generate some faulty signal owing to dust and high temperature. This paper describes an intelligent sensor system and controller which has a reconstruction mechanism for faulty signal. The faulty signals are dievided into two types as linear distortion and non linear distortion, respectively. The linear distorted signal is due to dust, and non linear distorted signal is due to physical breakdown of sensor or high temperature. These distorted signal have been reconstructed by the proposed method based on polynomial regression method and principal component analysis approach.. The proposed method has been applied to sun tracking system working in outdoor. For a robust and precision control of sun tracker, a fuzzy controller was also proposed. The fuzzy controller controls the tracker by using the collected sensor signal. The tolerance of the position control is within 1.5 degree. To show the validity of the developed system, some experiments in the field were illustrated.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.784-789
• /
• 2001

In order to investigate the fracture behaviors(penetration modes) and the resistance to penetration during ballistic impact of cold-rolled Al 5052 H34 alloy laminates, anodized Al 5052 H34 alloy laminates, and Al 5052 H34 alloy after cold-rolling, ballistic testing was conducted. In general, superior armor material is brittle materials which have a high hardness. Ballistic resistance of these materials was measured by protection ballistic limit(V50), a statical velocity with 50% probability for incomplete penetration. Fracture behaviors and ballistic tolerance, described by penetration modes, are observed respectfully, resulting from V50 test and Projectile Through Plate(PTP) test at velocities greater than V50. PTP tests were conducted with 0$^{\circ}$obliquity at room temperature using 5.56mm ball projectile. V50 tests with 0$^{\circ}$obliquity at room temperature were also conducted with projectiles that were able to achieve near or complete penetration during PTP tests. Surface Hardness, resistance to penetration, and penetration modes of Al 5052 H34 alloy laminates compared to those of cold-rolled Al 5052 H34 alloy laminates and anodized Al 5052 H34 alloy laminates anodized Al 5052 H34 alloy after cold-rolling.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.174-179
• /
• 2001

In order to investigate the fracture behaviors(perforation modes) and resistance to perforation during ballistic impact of aluminum alloy plate, ballistic tests were conducted. Depth of penetration experiments with 5.56mm-diameter ball projectile launched into 25mm-thickness Al 5052-H34 targets were conducted. A powder gun launched the 3.55g projectiles at striking velocities between 0.6 and 1.0 km/s. radiography of the damaged targets showed different penetration modes as striking velocities increased. Resistance to perforation is determined by the protection ballistic limit($V_{50}$), a statistical velocity with 50% probability for complete perforation. Fracture behaviors and ballistic tolerance, described by perforation modes, are respectfully observed at and above ballistic limit velocities, as a result of $V_{50}$ test and Projectile Through Plates (PTP) test methods. PTP tests were conducted with $0^{\circ}$ obliquity at room temperature using 5.56mm ball projectile. $V_{50}$ tests with $0^{\circ}$ obliquity at room temperature were conducted with projectiles that were able to achieve near or complete perforation during PTP tests. The effect of various impact velocity are studied with depth of penetration.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.567-572
• /
• 2001

In order to investigate the fracture behaviors(penetration modes) and resistance to penetration during ballistic impact of Titanium alloy laminates and nitrified Titanium alloy laminates which were treated by PVD(Physical Vapor Deposition) method, ballistic tests were conducted. Evaporation, sputtering, and ion plating are three kinds of PVD method. In this research, Ion plating was used to achieve higher surface hardness and surface hardness test were conducted using a Micro vicker's hardness tester. Resistance to penetration is determined by the protection ballistic limit($V_{50}$), a statistical velocity with 50% probability for complete penetration. Fracture behaviors and ballistic tolerance, described by penetration modes, are respectfully observed at and above ballistic limit velocities, as a result of $V_{50}$ test and Projectile Through Plates (PTP) test methods. PTP tests were conducted with $0^{\circ}$ obliquity at room temperature using 5.56mm ball projectile. $V_{50}$ test with $0^{\circ}$ obliquity at room temperature were conducted with projectiles that were able to achieve near or complete penetration during PTP tests. Surface hardness, resistance to penetration, and penetration modes of Titanium alloy laminates are compared to those of nitrified Titanium alloy laminates.