• 한국항행학회논문지
• /
• 제7권2호
• /
• pp.149-155
• /
• 2003

본 논문에서는 무선랜 기술을 활용한 초고속 무선인터넷 서비스에서 사용자 단말의 최대 성능을 얻기 위해 효과적으로 AP를 선택하고 연결을 설정하는 방식에 관한 것이다. IEEE 802.11에 기반한 공중 무선랜 환경에서 AP의 탐색과정을 수동형과 능동형으로 분류하고, 본 논문에서는 수동형 AP탐색 과정은 무선랜 접속장치(AP:Access Points) MAC계층에서 단말에 미디어 접근정보를 방송으로 알려주는 비콘(Beacon)프레임을 이용하고, 능동형 AP 탐색과정에서는 AP의 조사응답(Probe Response) 메시지 프레임을 이용하여 무선랜 단말에게 현재 AP에 연결(association)되어 있는 단말 갯수와 처리중인 트래픽량을 알려주는 방식을 제안한다. 단말에서는 RSSI, AP에 연결된 단말의 갯수와 처리하는 트래픽량의 정보를 종합적으로 검토하여 효율면에서 가장 유리한 AP를 선택하여 연결을 설정하면 다수의 사용자가 동시에 사용하는 핫스팟 환경에서도 최대성능을 얻을 수 있으며, 사업자입장에서는 사용자의 분산으로 자원과 망관리 효율면에서 상당한 효과가 있다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제1권1호
• /
• pp.118-126
• /
• 2000

Die-casting burr to casting process is removed by post-process for assembly and quality control of product. Though robot has been widely used for deburring job before. CNC exclusive machine is currently developed for high power, high speed machining and quick tool change. Deburring tool path with complex 3D curve type is defined to make out deburring NC program. But there is no efficient method to define it currently used methods with teaching probe on machine. In this study the efficient method to make out deburring NC program is developed. 5-axis digitizing machine is used to receive data of deburring path. And the post process for NC program generation is developed in consideration of the machining conditions. The developed system is not dependent on the skill of operator and has the advantage to maintain the flexibility of job to modify NC program due to the wear of tool and aging of the die casting.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.371-375
• /
• 2001

The tool wear that is developed by long-term machining in mold manufacturing with machining center makes a severe influence to the accuracy and the surface roughness. In this reason, tool-wear supervising system which has guaranteed high accuracy and high speed is needed to improve the measurement quality. Touching probe and touch sensor are widely used to measure the tool profile at on-machine measurement. In this paper, using the newly developed electric touch point measuring system, the Automatic Tool Compensation System is developed to correct the error of tool diameter resulted from the wear, and the operating method of this system is also provided.

• 한국공작기계학회논문집
• /
• 제10권4호
• /
• pp.48-54
• /
• 2001

The tool wear that is developed by long-term machining in mold manufacturing with machining center makes a severe influence to the accuracy and the surface roughness. in this reason, tool-wear supervising system which has guaranteed high accuracy and high speed is needed to improve the measurement quality. Touching probe and touch sensor are widely used to measure the tool profile at on-machine measurement. In this paper, using the newly developed electric touch point measuring system, the Automatic Tool Compensation System is developed to correct the error of tool diameter resulted from the wear, and the operating method of this system is also provided.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.445-449
• /
• 2001

The tool wear that is developed by long-term machining in mold manufacturing with machining center makes a severe influence to the accuracy and the surface roughness. In this reason, tool-wear supervising system which has guaranteed high accuracy and high speed is needed to improve the measurement quality. Touching probe and touch sensor are widely used to measure the tool profile at on-machine measurement. In this paper, using the newly developed electric touch point measuring system, the Automatic Tool Compensation System is developed to correct the error of tool diameter resulted from the wear, and the operating method of this system is also provided.

• 한국정밀공학회지
• /
• 제17권1호
• /
• pp.93-100
• /
• 2000

Die-casting burr due to casting process is removed by post-process for assembly and quality control of product. Though robot has been widely used for deburring job before, CNC exclusive machine is currently developed f3r high power, high speed machining and quick tool change. Deburring tool path with complex 3D curve type is defined to make out deburring NC program. But there is no efficient method to define it currently used methods with teaching probe on machine. In this study the efficient method to make out deburring NC program is developed. 5-axis digitizing machine is used to receive data of deburring path. And the post processor for NC program generation is developed in consideration of the machining conditions. The developed system is not dependent on the skill of operator and has the advantage to maintain the flexibility of job to modify NC program due to the wear of tool and aging of the die casting.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.76-76
• /
• 2008

The resonance properties due to the surface plasmon(SP) excitation of metal nanoparticles make the nanocomposite films promising for various applications such as optical switching devices. In spite of the well-known ultra-sensitive operation of optical switches based on a guided wave, the application of nanocomposite film(NC) has inherent limitation originating from the excessive optical loss related with the surface plasmon resonance(SPR). In this study, we addressed this problem and present the experimental and theoretical analysis on the pump-probe optical switching in prism-coupled Au(1 vol.%):$SiO_2$ nanocomposite waveguide film. The guided mode was successfully generated using a near infrared probe beam of 1550 nm and modulated with an external pump beam of 532 nm close to the SPR wavelength. We extend our approach to ultra-fast operation using a pulsed laser with 5 ns pulse width. To improve the switching speed through the reduction in thermal loading effect accompanied by the resonant absorption of pump beam light, we adopted a metallic film as a coupling layer instead of low-index dielectric layer between the high-index SF10 prism and NC slab waveguide. We observed great enhancement in switching speed for the case of using metallic coupling layer, and founded a distinct difference in origin of optical nonlinearities induced during switching operation using cw and ns laser.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.333-333
• /
• 2011

We have investigated the breakdown properties in liquids by high voltage pulse system. High voltage pulse power system is consisted of the Marx-generator with two capacitors (0.5 ${\mu}F$, withstanding voltage is 40 kV), to which the charging voltage can be applied to maximum 30 kV DC, spark gap switch and charging resistor of 20 $M{\Omega}$. We have made use of tungsten pin electrodes of anode-cathode (A-K), which are immersed into the liquids. The breakdown voltage and current signals are measured by high voltage probe (Tektronix P6015A) and current monitor (IPC CM-1.S). Especially the high speed breakdown or plasma propagation characteristics in the pulsed A-K gap have been investigated by using the high speed ICCD camera. We have measured the electron temperature through the Boltzmann plot method from the breakdown spectrums. Here the A-K gap has been changed by 1 mm, 2 mm, and 3 mm. The used liquids are distilled water and solution of salt (0.9 %). The output voltage and current signals at breakdown in distilled water are shown to be bigger than those in saline solution. The breakdown voltage and current characteristics in liquids will be discussed in accordance with A-K gap distances. It is also found that the electron temperatures and plasma densities in liquids are decreased in conformity with A-K gap.

• 비파괴검사학회지
• /
• 제23권5호
• /
• pp.475-479
• /
• 2003

재료에 존재하는 미소균열을 검출하기 위한 일반적인 초음파 탐상법은 고주파수 집속형 수직 초음파 탐촉자를 이용한 펄스-에코법을 사용하거나 표면파를 발생시키는 사각 탐상법을 사용한다. 이러한 방법들은 압연 롤, 세라믹 롤등 대형 구조물의 표면에 존재하는 미소 크랙의 존재 여부 및 위치 측정을 위한 자동화 초음파 탐상장치를 구성하기에는 다랑의 검사 데이터, 결함 위치정보의 불확실성 등 현실적으로 많은 어려움이 있다. 본 연구에서는 고정밀도 초음파 현미경(scanning acoustic microscope)에 비교적 저주파수의 대구경 초음파 탐촉자를 사용하여 미세균열의 존재 여부 및 위치 등의 검사결과를 실시간 A, B, C-Scan으로 표시할 수 있으며, 기존의 방법보다 검사 속도 및 시간을 10배 이상으로 향상된 파동화 초음파 탐상법 및 초음파 현미경법의 실용성을 검증하였다.

• 비파괴검사학회지
• /
• 제24권2호
• /
• pp.180-185
• /
• 2004

비금속 및 금속 재료에 존재하는 미소균열 검출에는 펄스에코법으로 고주파수 집속형 수직 탐촉자를 사용하거나 표면파를 사용한 사각 탐상법을 주로 사용한다. 이러한 방법은 압연 롤, 세라믹 롤 등 대형 구조물의 표면에 존재하는 미소 균열의 존재 여부, 위치 및 깊이 측정을 위한 자동화 초음파 탐상장치를 개발하는 다량의 검사 데이터, 결함 위치정보의 불확실성 등 현실적으로 많은 어려움이 있다. 본 연구에서는 대구경 초음파 탐촉자를 사용하여 초음파 회절현상을 발생시킴으로써, 미세 균열의 존재 여부 및 위치 등의 검사결과를 실시간 A, B, C-Scan으로 표시할 수 있었다. 또한 기존의 방법보다 정량적으로 표면 균열의 깊이를 정확하게 측정 가능한 방법을 제시하였다. 초음파의 회절현상을 이용함으로서 기존의 방법보다 검사 속도 및 시간이 10배 이상으로 향상되고 균열의 깊이를 정량적으로 평가할 수 있는 방법을 실험적으로 검증하였다.