• Journal of Biosystems Engineering
• /
• 제2권1호
• /
• pp.7-24
• /
• 1977

This paper is the forth and fifth one of the study on balanced type oscillating mole drainer. In the light of the results from previous reports about the model tests, some design criteria were established and a prototype machine was set up for experimental purpose. Motion characteristics and functionof the each parts of the machine were checked and analyzed. After that, performance tests of the prototype machine were carried out in thefield. Obtained results are summarized as follows ; 1. Ten centimeter of the bullet diameter was determined so as to be able to attach it to the tractors with capacity of 30 PS to 40 PS. 2. To maintain the balance between the moments of the front shank and rear shank, the oscillating amplitude of the rear bullet was determined to be larger than that of the front bullet. At the same time , the oscillating direction of the rear bullet was designed with the inclines of ten to thirty degrees. 3. An octagonal dynamo transduced was developed for measuring the compressive force of the upper link is measuring the draft force of the machine. Acceptable linear relationship between forces and strain responses from O.D.T. was obtained. 4. Analysing the balancing mechanism of the acting part of the machine , it was found that the total draft force of the machine was equal to the difference between the sum of the draft force produced from the right and left side bending moments of the lower drawber and the compressive force on the upper link. 5. There are acceptable linear relationship between the strain and twisting moment by driving shaft, and between strain and shank moment. Above results enable us to carry out the field experiment with prototype machine. 6. When the test machine was used in the field, it was possible to reduce the oscillating acceleration by forty percent in average as compared it with the single bullet mole drainer. 7. When the test machine was used under the oscillating condition, the dratt torce was reduced by 27 percent to 59 percent as compared it with the test machine under non-oscillating condition, while the draft force was increased by 7 percent to 20 percent as compared it with the mole drainer having oscillating single bullet. The reasoning behind this fact was considered as the resistance force due to the rear shank and bullet. 8. As the amplitude and frequency of the bullet were increased, the torque was increased accordingly. This tendency could be varied with the various characteristics of the given soils. And the larger frequency and amplitute, the more increasing oscil\ulcornerlating power but decreasing draft brce were needed, and draft force was increased as the velocity was increased.9. When the amplitude of the rear bullet was designed to be larger than that of the front bullet, the minimum value of the moment was lowered and oscillating acceleration was reduced. And when the oscillating direction of the rear bullet was declined back\ulcornerwards, oscillating acceleration was increased along with the increasing angle of decli\ulcornernation. When the test machine was operated in high speed, the difference between maximum moments and minimum ones became narrow. This varying magnitude of moments appeared on the moment oscillogram seems to be correlated to the oscillating acceleration and draft force. 10. From the analysis of variance, it was found that those factors such as frequency, amplitude, and operating velocity significantly affected in the oscillating acceleration, the draft resistance, the torque, the moment, and the total power required. And interaction between frequency and amplitude affected in the oscillating acceleration. 11. Within the given situation of this study, the most preferable operating conditions of the test machine were 7 Hz in oscillating frequency, 0.54 m/sec in operating velocity, and 39.1 mm in oscillating amplitude of front and rear bullets. However, it is necessary to select the proper frequency and magnitude of oscillation depending on the soil properties of the field in which the mole drainer is practiced by use of a bal1nced type oscillating mole drainer. 12. It is recommended that a comparative study of the mole drainers would be performed in the near future using two separate balanced oscillating bullet with the one which is operated by oscillating the movable bullet in a single cylinder or other balanced type which may be single oscillating bullet with spring, damper or balancing weight, and that of thing. To expand the applicability of the balanced type oscillating mole drainer in practical use, it is suggested to develop a new mechanism which perform mole drain with vinyl pipe or filling material such as rice hull.

• 헤리티지:역사와 과학
• /
• 제52권3호
• /
• pp.172-187
• /
• 2019

본 논문의 목적은 무형문화유산 일반전승자의 역할을 주목하면서, 소셜 네트워크 분석을 활용해 무형문화유산 전승공동체의 연결망과 전승활동에서 발생하는 지식 흐름의 구조적 특징을 분석하는 데 있다. 이러한 연구 목적을 이루기 위해 본 논문에서는 연구 대상을 국가무형문화재 종목들 중에서 일반인의 전승활동이 활발한 '아리랑'으로 선정하였다. 아리랑은 오랜 기간 제도권 밖에서 일반대중 활동을 중심으로 자생적으로 전승되었으며, 2015년에 전문전승자 지정 없이 국가무형문화재로 지정된 최초의 사례이다. 현재 아리랑은 약 60여 종, 3,600여 곡에 이르는 것으로 추정된다. 본 논문에서는 이 중에서 전문전승자와 일반전승자의 상호교류가 활발한 향토민요 '정선아리랑'을 중심으로 연구하였다. 소셜 네트워크 분석은 사람과 사람 사이의 관계를 노드(Node)와 링크(Link)로 모델링하여 수치화 통계화 시각화하여 해석하는 방법을 말한다. 이 방법은 전통적으로 사회학에서 사회조직 및 취약계층을 연구하는 데 꾸준히 활용되었다. 최근에는 문헌정보학, 문화콘텐츠학, 경영학 등과 같은 분야에서 연구경향, 시장동향, 조직관리 등을 연구하는 데 이 방법이 활용되고 있다. 이처럼 여러 학문 분야에서 소셜 네트워크 분석을 이용한 연구가 증가하는 추세지만 문화재 분야에서는 관련 연구를 찾아보기가 어렵다. 소셜 네트워크 분석은 크게 3단계, '연결망 모델링', '데이터 수집', '데이터 분석 및 시각화'로 진행된다. 본 논문에서는 첫 번째, 2017년 기준으로 정선아리랑보존회 회원 전체를 조사 대상으로 선정하여 완전한 연결망으로 모델링하였다. 두 번째, 데이터 수집은 보존회 회원 명부를 확보해 2017년 10월 17일 면대면 조사와 2017년 12월 15일 전화 설문조사를 통해 하였다. 세 번째, 데이터 분석은 Netminer 4.0 프로그램을 이용해 중심성 분석, 구조적 등위성 분석, 커뮤니티 분석 등을 주요 지표로 하였다. 본 논문은 기존에 무형문화유산 계보조사에서 소수 사람들의 구술자료에 의존해 파악하던 방식에서 벗어나 객관적이고 계량적인 방법으로 조사할 수 있는 기반을 제공하였다는 점에서 연구 의의가 있다. 그리고 무형문화유산 전승공동체 구성원들의 관계 및 지식 흐름의 구조를 지식지도(2D Spring Map) 형태로 시각화함으로써 추상적인 내용을 직관적으로 파악할 수 있게 했다는 점에서 의미가 있다.