• 한국세라믹학회지
• /
• 제36권5호
• /
• pp.471-477
• /
• 1999

Fe and Fe-Mo binder were used to produce TiB2 based cermet by a pressureless sintering. The densification behaviour of TiB2-Fe-Mo cermet during liquid-phase sintering in argon was studied in relation to binder phase charactertics. The effects of Mo addition and sintering condition on the sintering behaviour and mechanical properties were also investigated. TiB2-based cermets with Fe-Mo binder composition showed a better sinterability than the cermets with only Fe binder. In TiB2-Fe-Mo cermet higher densities in the wide temperature range were obtained and also fully densified sintered cermet were obtained at 1873K The enhancement in the densification phenomenon of TiB2-Fe-Mo system can be explained by improved liquid phase wettability associated with the roles of Mo components as solute atoms. When Fe-Mo binders were used cermets with a finer grain size and enhanced mechanical properties wereproduced and new phases such as Fe2B and Mo2FeB2 were observed in the sintered cermet. The highest bending strength was obtained from the 20vol% Fe-Mo cermet and these hardness-fracture toughness combination in the wide binder compositions is better than that of TiB2-Fe cermet. In order to improve mechanical properties microstructure control with high purity powders is desirable because high purity powders prevent the formation of Fe2B and Mo2FeB2 phase which comsume the ductile binder phase.

• 자원리싸이클링
• /
• 제12권2호
• /
• pp.36-44
• /
• 2003

전구용 필라멘트 제조 공정에서 발생되는 Mo함유 폐산 내에 암모니아 가스를 취입하여 유가금속인 Mo를 암모늄테트라몰리브데이트($_3$.2NH$4MoO_3$.$H_2$O) 형태로 침전 회수하고, 여과 후 발생되는 중화 여액을 활용하기 위한 연구를 수행하였다. 암모니아 중화법을 이용한 Mo 회수공정에 있어 다양한 공정 변수들에 의한 제품의 회수율, 순도, 입도 등 특성을 평가하였으며, 그 결과로부터 Mo 염의 회수율 99.5% 이상, 순도 99.5% 이상을 확보하기 위한 최적 조업조건을 도출하였다. Bench 및 Pilot규모의 실험을 통하여 상업화 가능성을 확인하였으며, 폐산의 중화반응 후 발생된 여액은 엽면시비용 액상 복합비료의 원료로 사용 가능함을 확인하였다.

• KSBB Journal
• /
• 제24권2호
• /
• pp.212-215
• /
• 2009

본 연구에서는 식물세포배양으로부터 항암물질 paclitaxel을 고 순도, 고 수율로 분리 가능한 액-액 추출 공정에서의 주요 공정 변수들을 최적화 하였다. 액-액 추출을 위한 최적의 유기용매 (methylene chloride) 첨가량, 추출횟수, 혼합시간, 정체시간은 각각 0.28 (v/v), 3 (times), 30 min, and 40 min 임을 알 수 있었다. 액-액 추출 공정은 특히 메탄올을 이용한 biomass 추출물에 포함되어 있는 다량의 극성불순물을 제거하는데 매우 효과적이었다. 또한 액-액 추출 후 농축조건으로는 후속공정에서의 높은 순도의 paclitaxel 뿐만 아니라 작업의 용이성 측면에서 액-액 추출액을 rotary evaporator로 완전히 농축하는 것이 가장 바람직함을 알 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제30권7호
• /
• pp.1611-1615
• /
• 2009

We designed new anthracene-based host material to increase color purity as well as device efficiency. The new blue host, 9,10-bis(2,4-dimethylphenyl)anthracene (BDA), has highly twisted structure and wide band gap due to ortho interaction between anthracene and introduced 2,4-dimethylphenyl substituents. BDA exhibited deep blue fluorescence in solution (${\lambda}_{max}$ = 410 nm) and in solid state (${\lambda}_{max}$ = 429 nm), respectively, with the wide optical band gap (E = 3.12 eV). Blue-light-emitting OLEDs using obtained host and 2% Flu-DPAN as emitter showed 8 cd/A of high efficiency as well as high color purity [CIE coordinates = (0.15, 015)].

• 한국수소및신에너지학회논문집
• /
• 제21권5호
• /
• pp.355-363
• /
• 2010

High purity hydrogen, 97-99 vol.%, with CO at just ppm levels was obtained in a fixed bed of iron oxide employing the steam-iron cycle operation with reduction at 823K and oxidation in a steam-$N_2$ mixture at 773K TGA experiments indicated that temperature of the reduction step as well as its duration are important for preventing carbon build-up in iron and the intrusion of $CO_2$ into the hydrogen product. At a reduction temperature of 823K, oxide reduction by $H_2$ was considerably faster than reduction by CO. If the length of the reduction step exceeds optimal value, low levels of methane gas appeared in the off-gas. Furthermore, with longer durations of the reduction step and CO levels in the reducing gas greater than 10 vol.%, carbidization of the iron and/or carbon deposition in the bed exhibited the increasing pressure drop over the bed, eventually rendering the reactor inoperable. Reduction using a reducing gas containing 10 vol.% CO and a optimal reduction duration gave constant $H_2$ flow rates and off-gas composition over 10 redox reaction cycles.

• Journal of Electrical Engineering and Technology
• /
• 제13권1호
• /
• pp.387-392
• /
• 2018

Static characteristics of SiC (silicon carbide) lateral p-i-n diodes implemented on semi-insulating substrate without an epitaxial layer are inVestigated. On-axis SiC HPSI (high purity semi-insulating) and VDSI (Vanadium doped semi-insulating) substrates are used to fabricate the lateral p-i-n diode. The space between anode and cathode ($L_{AC}$) is Varied from 5 to $20{\mu}m$ to inVestigate the effect of intrinsic-region length on static characteristics. Maximum breakdown Voltages of HPSI and VDSI are 1117 and 841 V at $L_{AC}=20{\mu}m$, respectiVely. Due to the doped Vanadium ions in VDSI substrate, diffusion length of carriers in the VDSI substrate is less than that of the HPSI substrate. A forward Voltage drop of the diode implemented on VDSI substrate is 12 V at the forward current of $1{\mu}A$, which is higher than 2.5 V of the diode implemented on HPSI substrate.

• 공업화학
• /
• 제25권3호
• /
• pp.330-336
• /
• 2014

추출-증류-결정의 조합에 의해 모델 콜타르 흡수유 중에 함유된 인돌의 정제를 검토했다. 흡수유는 4종류의 질소고리 화합물(9.2% 퀴놀린, 2.4% 이소퀴놀린, 4.7% 인돌, 2.4% 퀴날딘), 3종류의 2환 방향족 화합물(14.2% 1-메틸나프탈렌, 31.8% 2-메틸나프탈렌, 23.5% 디메틸나프탈렌), 5.5% 비페닐과 3.3% 페닐에테르의 9종류의 화합물로 구성되어 있다. 포름아미드 추출-증류-노말헥산을 사용한 용액 결정화의 조합의 채택에 의해 99.5% 인돌을 회수할 수 있었다. 본 연구를 통해 얻어진 실험적 결과를 이용하여 콜타르 흡수유 중에 함유된 인돌의 회수공정을 검토했다.

• 대한방사성의약품학회지
• /
• 제8권2호
• /
• pp.87-93
• /
• 2022

[¹⁸F]FDG is known as the most widely used radiopharmaceutical in the imaging field of nuclear medicine worldwide. With the introduction of PET equipment, the demand for [¹⁸F]FDG has increased and the production volume has also increased. However, in order to increase production, the use of ¹⁸F radioisotope must be increased or [¹⁸F]FDG must be synthesized in high yield. Therefore, in order to meet the high yield and purity of radiopharmaceuticals, a radiopharmaceutical automatic synthesizer was required. As the use of [¹⁸F]FDG increased, automated synthesizer manufacturers supplied various types of radiopharmaceutical automated synthesizers to the market. In this study, we developed a commercialized [¹⁸F]FDG radiopharmaceutical automatic synthesizer (sCUBE FDG) using a disposable cassette type that complies with GMP developed by FutureChem, a leading radiopharmaceutical company. We used sCUBE FDG to verify the production process, radiopharmaceutical's quality (radiochemical purity, etc.), and radiochemical yield of [¹⁸F]FDG. As a result of optimizing the automatic synthesis process and synthesizing a total of 30 times, the production time was 35 ± 3 minutes and the average production yield was 65.6%.

• 한국재료학회지
• /
• 제18권3호
• /
• pp.153-158
• /
• 2008

Fe-aluminides have the potential to replace many types of stainless steels that are currently used in structural applications. Once commercialized, it is expected that they will be twice as strong as stainless steels with higher corrosion resistance at high temperatures, while their average production cost will be approximately 10% of that of stainless steels. Self-propagating, high-temperature Synthesis (SHS) has been used to produce intermetallic and ceramic compounds from reactions between elemental constituents. The driving force for the SHS is the high thermodynamic stability during the formation of the intermetallic compound. Therefore, the advantages of the SHS method include a higher purity of the products, low energy requirements and the relative simplicity of the process. In this work, a Fe-aluminide intermetallic compound was formed from high-purity elemental Fe and Al foils via a SHS reaction in a hot press. The formation of iron aluminides at the interface between the Fe and Al foil was observed to be controlled by the temperature, pressure and heating rate. Particularly, the heating rate plays the most important role in the formation of the intermetallic compound during the SHS reaction. According to a DSC analysis, a SHS reaction appeared at two different temperatures below and above the metaling point of Al. It was also observed that the SHS reaction temperatures increased as the heating rate increased. A fully dense, well-bonded intermetallic composite sheet with a thickness of $700\;{\mu}m$ was formed by a heat treatment at $665^{\circ}C$ for 15 hours after a SHS reaction of alternatively layered 10 Fe and 9 Al foils. The phases and microstructures of the intermetallic composite sheets were confirmed by EPMA and XRD analyses.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.966-969
• /
• 2006

An optical model based on the optical thin-film theory is derived to calculate the output radiance of small molecules organic light-emitting diodes (OLEDs). We have designed the high efficiency OLEDs using the reflectance phase control of dielectric layers. It is found that OLED with a single $TiO_2$ dielectric layer is a good candidate to enhance the outcoupling efficiency and increase the color purity.