• 한국주조공학회지
• /
• 제11권4호
• /
• pp.303-313
• /
• 1991

The Purification mechanism of high purity aluminum was studied through the variation of stirring speed and coolant flow rate in the stirring method. In the stirring method the degree of purification was changed as the following factors;the variation of diffusion boundary layer thickness the variation of growth rate and the solute concentration of the residual melt. The concentration of Fe and Si was decreased as the stirring speed and the radial distance increased. In a high stirring speed of 2000rpm with unidirectional stirring mode, the uniformity of solutes was obtained. On the other hand, the purification of Si was done by the combinations of stirring method, fractional melting and acid leaching. In the case of Si purification, the centrifugal force developed in the melt acted as the significant purification factor. It was possible to obtain the purified 3N grade Si crystal after the complete elimination of residual aluminum by fractional melting and acid leaching.

• 자원리싸이클링
• /
• 제24권3호
• /
• pp.11-15
• /
• 2015

주석을 함유한 폐기물에서 고순도 주석을 회수하는 기술을 개발하기 위해 주석오니의 환원 제련 및 전해정련에 대해 연구하였다. 2단계의 건식제련을 통해 주석오니에 함유된 주석산화물을 환원시켜 92.7%의 주석을 회수하였다. 또한 건식공정으로 회수한 조주석을 전해정련시켜 순도를 99.87%까지 증가시켰다. 본 연구결과는 국내에서 발생하는 폐자원으로부터 주석을 회수하여 국내 주석 소비량의 일부를 대체할 수 있는 상용화기술의 토대가 될 수 있다.

• 자원리싸이클링
• /
• 제19권5호
• /
• pp.3-12
• /
• 2010

고순도 백금족 금속은 첨단 산업의 기초 소재로 향후 국내 산업의 지속적인 발전에 꼭 필요하다. 국내에는 백금족 금속을 함유한 광물이 전무하므로 백금족 금속을 함유한 여러 폐자원으로부터 백금족 금속을 고순도로 분리 정제할 수 있는 기술의 개발이 시급하다. 백금족 금속의 화학적 성질과 침출거동에 대한 자료를 문헌에서 조사하였다. 또한 향후 백금족 금속과 같은 난용금속의 침출에 이용이 증가할 것으로 예상되는 염소가스를 취입한 염산용액의 열역학적 해석 방법을 소개하였다, 백금족 금속간의 화학적 성질과 침출거동의 미세한 차이정올 이용하면 백금족 금속을 고순도로 회수할 수 있는 기술 개발이 가능하다.

• 한국세라믹학회지
• /
• 제52권6호
• /
• pp.435-440
• /
• 2015

It is a challenge from an industrial point of view to fabricate silicon nitride substrates with high thermal conductivity and good mechanical properties for power devices from high-purity Si scrap powder by means of thick film processes such as tape casting. We characterize the residual carbon and oxygen content after the binder burnout followed by nitridation as a function of the temperature in the temperature range of $300^{\circ}C-700^{\circ}C$ and the atmosphere in a green tape sample which consists of high-purity Si powder and polymer binders such as polyvinyl butyral and dioctyl phthalate. The optimum condition of binder burnout is suggested in terms of the binder removal temperature and atmosphere. If considering nitridation, the burnout of the organic binder in air compared to that in a nitrogen atmosphere could offer an advantage when fabricating reaction-bonded $Si_3N_4$ substrates for power devices to enable low carbon and oxygen contents in green tape samples.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1087-1090
• /
• 2005

We have investigated the synthesis and field emission properties of high-quality double-walled carbon nanotubes (DWCNTs) using a catalytic chemical vapor deposition method and a hydrogen arc discharge method. The produced carbon materials using a catalytic CVD method indicated high-purity DWCNT bundles free of amorphous carbon covering on the surface. By adopting a hydrogen arc discharge method, we could obtained high-purity DWCNTs in large-scale. DWCNTs showed low turn-on voltage and higher emission stability compared with SWCNTs.

• 한국세라믹학회지
• /
• 제48권1호
• /
• pp.1-5
• /
• 2011

Silicon carbide (SiC) has recently drawn an enormous industrial interest because of its useful mechanical properties such as thermal resistance, abrasion resistance and thermal conductivity at high temperature. RF Thermal plasma (PL-35 Induction Plasma, Tekna CO., Canada) has been utilized for synthesis of high purity SiC powder from cheap inorganic solution (Tetraethyl Orthosilicate, TEOS). It is found that the powders by thermal plasma consist of SiC with free carbon and amorphous silica ($SiO_2$) and, by thermal treatment and HF treatment, the impurities are driven off resulting high purity SiC nano-powder. The synthesized SiC powder lies below 30 nm and its properties such microstructure, phase composition, specific surface area and free carbon content have been characterized by X-ay diffraction (XRD), field emission scanning electron microscopy (FE-SEM), thermogravimetric (TG) and Brunauer-Emmett-Teller (BET).

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.719-724
• /
• 2001

The objective of this investigation was to separate silicon and silica for recycling by the liquid-liquid separation technique. In the preparation of silicon (Si) single crystal, a small amount of silicon is fixed on the surface of silica (quartz, $SiO_2$) crucible. The used crucible is crushed for recycling both silicon and silica in a high purity from the mixed powder. Zeta-potential of silicon and silica are almost the same at pH higher than 3. Their separation by simple flotation is ruled out. However, their hydrophobic characteristics are different in several different organic solvent from the measurement of contact angle. Therefore, the liquid-liquid extraction is employed to separate silicon and silica. The result indicates that the organic solvent mixed with dodecyl ammonium acetate could extracted the silicon powder at high purity (97-100%) with high recovery from the silica powder in the water phase.

• 한국수소및신에너지학회논문집
• /
• 제15권3호
• /
• pp.220-227
• /
• 2004

The purpose of this paper is, based on the theoretical background of the principle of gas purification and absorption, and the absorbing ability of metals, to syudy the efficiency of gas purification of inorganic gases using Zr alloys, so as to contribute to the IT industry. To produce and distribute gas with high purity and ultra-high purity, different types of gas purifier are currently being used: distillation type, getter type, catalyst type, absorption at low-temperature type, and membrane separation equipment. From the different purification methods mentioned above, the getter type gas purifier is capable of not only high performance and capacity but also P.O.U(Point Of Use) method. The key of the getter type gas purifier is its efficiency of gas purification, which is the subject chosen for this study.

• 한국세라믹학회지
• /
• 제49권6호
• /
• pp.523-527
• /
• 2012

Silicon carbide (SiC) has recently drawn an enormous amount of industrial interest due to its useful mechanical properties, such as its thermal resistance, abrasion resistance and thermal conductivity at high temperatures. In this study, RF thermal plasma (PL-35 Induction Plasma, Tekna CO., Canada) was utilized for the synthesis of high-purity SiC powder from an organic precursor (hexamethyldisilazane, vinyltrimethoxysilane). It was found that the SiC powders obtained by the RF thermal plasma treatment included free carbon and amorphous silica ($SiO_2$). The SiC powders were further purified by a thermal treatment and a HF treatment, resulting in high-purity SiC nano-powder. The particle diameter of the synthesized SiC powder was less than 30 nm. Detailed properties of the microstructure, phase composition, and free carbon content were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), a thermogravimetric (TG) analysis, according to the and Brunauer-Emmett-Teller (BET) specific surface area from N2 isotherms at 77 K.

• 한국수산과학회지
• /
• 제55권3호
• /
• pp.278-283
• /
• 2022

To develop a value-added anchovy Engraulis japonicus sauce, we examined processing conditions and quality characteristics of rapidly fermented, high purity anchovy sauce (RPAS) by adding 30% (w/w) intermediate salt-fermented anchovy material. RPAS had higher total nitrogen and amino nitrogen contents, and lower salinity than traditional anchovy sauce (TAS). The total amino acid contents of RPAS and TAS were 17,626.8 and 12,808.2 mg/100 g, respectively, and the major amino acids were alanine, glutamic acid, lysine, cystine, valine, and leucine. The histamine contents of RPAS and TAS were 12.6 and 25.2 mg/100 g, respectively, and the protease activity levels were 0.851 and 0.595 unit/mg, respectively. These results demonstrate that RPAS was more flavorful, and could shorten the salt-fermentation period by more than half compared to TAS, and can serve as a high-end fish sauce.