• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.121-124
• /
• 2009

We developed a panel of innovative solution-based approaches for synthesis of multicomponent sulfide phosphor materials. The application of these synthesis strategies allowed for preparation of high-purity and high-brightness $BaAl_2S_4:Eu$ and $Ba_2SiS_4:Eu$ phosphors and led to the discovery of new phosphors suitable for application in the LED-based lighting including $Sr_2ZnS_3:Eu$, $CaBaSiS_4:Eu$ and $(Ba,Sr)_2ZnS_3:Eu$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.477-480
• /
• 1998

Sol-gel processing, which started some decades back as a laboratory curiosity, has proved to be a powerful and versatile technique for the synthesis of materials. The utility of the sol-gel method for producing glass and ceramic materials in the form of powders, fibers, thin films and bulk shapes with high purity, functional microstructures and potentially high chemical homogeneity at relatively low temperature (compared to conventional processing) has been discussed.

• Ceramist
• /
• v.21 no.1
• /
• pp.80-97
• /
• 2018

To realize a high luminous efficacy and a high emission color purity for the white-LEDs, the understanding for luminescence properties of the phosphors is significantly important because the performance of white-LEDs is directly affected by the luminescence properties of the phosphors. In this paper, therefore, we reviewed some commercially available $Eu^{2+}$- and $Ce^{3+}$- activated phosphors and discussed for the luminescence properties of these phosphors.

• The Korean Journal of Nuclear Medicine
• /
• v.23 no.1
• /
• pp.71-83
• /
• 1989

For the development of $^{99m}Tc-labelled$ antimony sulfide colloid and hydroxyethyl starch, various experiments such as preparation of colloid, control of the distribution of particle size, establishment of labelling conditions, determination of labelling yield and radiochemical purity, examination of stability, and organ imagings of rabbits etc. were carried out. 1) Antimony sulfide colloid was readily prepared by the reaction of aqueous solution of antimony potassium tartrate with hydrogen sulfide generated by treating ferrous sulfide with dilute sulfuric acid. The colloid could be stabilized by adding small amount of polyvinylpyrrolidone. 2) Electron microscopy analysis exhibited the distribution of colloid size in the range of $1\sim15nm$ with a major portion of 9 m. The colloid solution was sterilized by membrane filtration $(0.2{\mu}m)$ and then stored at $4^{\circ}C$. This sterilized colloid was so stable that it was usable at least for one year. 3) The antimony sulfide colloid was labelled by adding sodium $pertechnetate-^{99m}Tc$ solution to the reaction vial, followed by adding hydrochloric acid and then boiled for 30 min. The optimal pH of the reaction mixture was found to be in the range of $1.3\sim1.4$. Instant thin layer chromatography (ITLC) analysis showed high labelling yield of above 99.5%. This labelled colloid maintained high radio-chemical purity of above 99% until 10 hours after labelling. 4) Animal studies showed high uptake of $^{99m}Tc-Sb_2S_3$ colloid at lymph vessels and nodes indicating a suitable agent for lymphoscintigraphy. Satisfactory results were also abtained in other clinical studies. 5) Hydroxyethyl starch (HES $0.6\sim1.0%$) was labelled with $Na^{99m}TcO_4$ in the presence of $SnCl_2$ with high labelling yield of above 99.5%. The optimal pH of the reaction mixture was in the range of $1.8\sim2.0$. $^{99m}Tc-HES$ maintained high radiochemical purity of above 99% until 10 hours after labelling. 6) Animal studies showed that $^{99m}Tc-HES$ migrated more rapidly from the injection sites into the lymph vessels than $^{99m}Tc-Sb_2S_3$ colloid while less amount of the former was uptaken at lymph nodes than that of the latter. Similar phenomenon was also observed in other clinical studies. As a result, $^{99m}Tc-Sb_2S_3$ colloid was found to be more effective lymphoscintigraphic agent than $^{99m}Tc-HES$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.9-17
• /
• 2016

A purification method was established for high-purity chondroitin sulfate from skate cartilage. Hydrolytic extraction of skate backbone cartilage was investigated with the proteases alcalase and protamex, and the extraction contents of chondroitin sulfate were measured with several physicochemical processes. The yield of extract from skate cartilage with $40^{\circ}Brix$ concentration was 23.3% with 2% alcalase hydrolysis, which was decreased to 8.47% and 3.37% with the first and second additional ethanol purifications, respectively. The yield was 16.62% with one ethanol purification after hydrolysis with a mixture of 1% alcalase and 1% protamex. The content of chondroitin sulfate was measured as 39.88-45.08% with different ratios of ethanol solvent. The content was 42.92% at a solvent ratio of 1:1 with alcalase protease and 45.08% with a ratio of 1:2 using a protease mixture of alcalase and protamex. The molecular weight range of chondroitin sulfate was about 110-310 thousand Da, and the purity of chondroitin sulfate was 24.87-49.92% with a mixture of alcalase and protamex in GPC analysis. The maximum purity of chondroitin sulfate was 53.93% after ultrafiltration. The odor strength of chondroitin sulfate was decreased by 33% and 38% after ethanol purification and additional filtration with activated carbon, respectively. The odor concentration of ammonia and TMA from chondroitin sulfate was decreased by 52.1% and 37.89% with activated carbon filtration and two ethanol purifications, respectively, but it was necessary to eliminate the odor components efficiently using additional physicochemical processes.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.5
• /
• pp.770-774
• /
• 2002

The effect of mixing ratio of materials and their retort processing conditions on the physical properties and preference of oyster porridge were investigated. Rice gave adequate viscosity (about 800 cp) to the porridge as it was used 10～12% level and half of it was ground. Potato starch, waxy corn starch, and Perfectamyl AC showed small variation in viscosity unrelated to the temperature, that was a good condition for high quality porridge. Especially, waxy corn starch had a good property for retort porridge because its viscosity was maintained high during the processing and decreased to preferable one after processing. Purity CSC, modified starch gave gum-like texture and didn't cause water-separation much after freezing and thawing treatment of the porridge. Therefore, it was good for enhancing the physical property of the porridge as a co-additive of waxy corn starch when it was used at quarter level of waxy corn starch. Xanthan gum increased dispersibility of materials and it was useful for stabilizing physical quality of the porridge without affecting preference when it was used below 0.2% concentration. As a result, the optimal material-mixing ratio was determined as rice 10% (50% of it was ground), waxy corn starch 1.5%, Purity CSC 0.5%, xmthan gum 0.2%, salt 0.3%, and water 87.5%. Oyster's porridge, retort processed with this recipe, showed stable physical property after 6 month storage at room temperature.

• Journal of Life Science
• /
• v.19 no.6
• /
• pp.728-734
• /
• 2009

In this work, a simple, inexpensive and reproducible technique of flotation density gradient centrifugation was developed to isolate monocytes with high purity and yield from peripheral blood mononuclear cells (PBMC) using Histopaque solution, density and osmolarity of which were modified to 1.072 g/ml and 335 mOsm with phosphate-buffered saline (PBS) and sodium chloride (NaCl) solution, respectively. The average purity of monocytes was 74.75${\pm}$3.84%, with the individual purity ranging from 71.44% to 82.38%. The average yield of monocytes was 32.62${\pm}$11.16%, with the individual yields ranging from 21.02 to 53.63%. The monocytes isolated by floatation density gradient centrifugation could be successfully cultured into morphologically, phenotypically and functionally dendritic cells in vitro. In conclusion, the entire procedure seemed to be faster and more convenient, simple and cost-effective than other monocyte isolation methods, including plastic adherence and density gradient methods, and has the potential to be developed as a closed system for clinical scale generation of dendritic cells.

• Korean Chemical Engineering Research
• /
• v.56 no.5
• /
• pp.647-654
• /
• 2018

In order to solve the global warming and reduce greenhouse gas emissions, it has been developed the $CO_2$ capture technology by oxy-fuel combustion. But there is a problem that the economic efficiency is low because the oxygen production cost is high. ASU (Air Separation Unit) is known to be most suitable method for producing large capacity of oxygen (>2,000 tpd). But most of them are optimized for high purity (>99.5%) oxygen production. If the ASU process is optimized for low purity(90~97%) oxygen producing, it is possible to reduce the production cost of oxygen by improving the process efficiency. In this study, the process analysis and comparative evaluation was conducted for developing large capacity ASU for oxy-fuel combustion. The process efficiency was evaluated by calculating the recovery rate and power consumption according to the oxygen purity using the AspenHysys. As a result, it confirmed that the optimal purity of oxygen for oxyfuel combustion is 95%, and the power consumption can be reduced by process optimization to 12~18%.

• Resources Recycling
• /
• v.26 no.6
• /
• pp.84-90
• /
• 2017

The electro-refining process was performed to recovery high purity copper from low grade copper containing sludge in sulfuric acid. The surface morphologies and roughness of electro-refining copper were analyzed with variation of the type and concentration of organic additives, the best surface morphology was obtained 5 ppm of the gelatin type and 5 to 10 ppm of the thiol type organic additive. The crude metal consisted of copper with 86.635, 94.969 and 99.917 wt.%, several impurity metals of iron, nickel, cobalt and tin by pyro-metallurgical process. After electro-refining process, the purity of copper increases to 3N or 4N grade. The impurity concentrations and copper purities of copper crude metals, electrolyte and electro-refining copper were analyzed using ICP-OES, the electro-refining time and purity of copper crude metal to recover 4N grade copper were deduced.

• Journal of the Korean Institute of Gas
• /
• v.8 no.1 s.22
• /
• pp.37-47
• /
• 2004

Pressure swing adsorption (PSA) process using CMS as an oxygen purifier was developed to produce high purity oxygen over $99\%$ with high productivity. The cyclic performances such as purity, recovery, and productivity of PSA process were compared experimentally and theoretically under the non-isothermal condition. A binary ($O_2$/Ar 95:5 vol.$\%$) and two kinds of ternary ($O_2/Ar/N_2$ 95:4:1 and 90:4:6 vol.$\%$) mixtures were used as feed gases. The developed process with the consecutive two blowdown steps produced the oxygen with $99.8\%$ purity and $56\%$ recovery from $95\%$ oxygen containing feed. However, in the feed with $90\%$ oxygen, the $O_2$ Purity was decreased up to $97.3\%$. In addition, because the cyclic performances of the suggested process was significantly affected by the diffusion rate, the non-isothermal model with the the modified LDF model was applied for the process simulation. The concentration-dependent rate parameter of the applied rate model was incorporated with the Langmuir isotherm.