• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.371-375
• /
• 2007

Due to the benefit of QRA(Quantitative Risk Analysis) method, we can evaluate the risk, and it helps us to make our safe. We also depend to some of correlation equations to assess the jet fire at high pressurized transmission line. However, we can evaluate the risk within limitations. After comparing the current model to investigation report of natural gas transmission line accident at EL-Paso in U.S., this study concludes that more research and study are required because currently developed model cannot expect factors of the fire risk such as flame configuration.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.2031-2036
• /
• 2003

High-pressurized jet is widely using in industrial works. however, few papers studied on the performances or characteristics on that kind of nozzles. And in this study, some flow characteristics with the variation of nozzle aspect ratios such as mean velocity distributions, momentum variations along the center line have been experimentally investigated. As the results, some semi-empirical correlations of profiles of pressure and mean velocity distributions, momentum conservations with the nozzle aspect ratios are formulated. It is expected that these empirical formula can be applied for the random estimations of nozzle performances.

• 대한기계학회논문집B
• /
• 제25권6호
• /
• pp.811-818
• /
• 2001

The wave characteristics for a non-reacting high-speed liquid jet were investigated using a linear stability theory. In this study, 2-D incompressible viscid momentum equation for a liquid jet was considered, and the effects of injection parameters, such as Weber number, Reynolds number, and density ratio, on the wave characteristics were investigated. With the wavelength obtained from the stability analysis, the atomization model was suggested. The droplet sizes after breakup were determined by the wavelengths of fast growing waves, and the mass of the shed droplets was determined by the breakup time derived by ORouke et al. It was found that in comparison with measurements of diesel fuel spray, the results of calculation had a similar trend of the decrease of overall SMD with the increase of Reynolds number.

• 수산해양기술연구
• /
• 제40권2호
• /
• pp.155-160
• /
• 2004

Water jet trajectories and velocity deficits from a high pressurize nozzles were experimentally observed. In this article, several parameters affecting plugging and erosion onto the steam generator tube were quantitatively analyzed. Visualization, velocity distribution, and spray growth rate with different nozzle configurations have been mainly focused using a 2-D PDPA (Phase Doppler Particle Analyzer) system. The results indicated that trajectories along the centerline regardless of their momentum has its potential core region. However, the phenomena from the peripheral part need to be meticulosly considered. Accordingly, it is evident that quantitative velocity deficits at the outer region are outstanding due to the aerodynamical drag and entrainment.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.717-722
• /
• 2003

The aspect ratio is the main parameter which governs the outer flow pattern and nozzle performance. And in this study, some flow characteristics with the variation of nozzle aspect ratios such as mean pressure distributions along the center line of the outer flow, flow coefficients and the diffusion angles have been experimentally investigated. Through the experimental analysis, the higher aspect ratio was known to decrease the jet kinetic energy because of the friction losses at the outer of nozzle. As the result, it is found that the nozzle performance depends mainly on the aspect ratio of nozzle.

• Nuclear Engineering and Technology
• /
• 제56권4호
• /
• pp.1407-1424
• /
• 2024

In Pressurized Water Reactors, most of the failed fuel rods are often observed at the periphery of the fuel assembly, especially near the core baffle. The rod vibration-induced fretting wear is a significant failure mechanism strongly correlated with the coolant and support conditions. This paper presents a coupled vibration model of double-rod to predict the grid-to-rod fretting (GTRF) wear. A motion-dependent fluid force model is used to simulate the coolant cross flow, the gap constraints with asymmetric stiffness between spring and dimple on the vibration form, and the fretting wear are discussed. The results show the effect of the coupled vibration on the deterioration of wear, providing a sound theoretical explanation of some failure phenomena observed in the previous experiment. Exploratively, we analyze the impact of the baffle jet on the GTRF wear, which indicates that the high-velocity cross-flow will significantly affect the vibration forms while sharply changing the wear behavior.

• 항공우주시스템공학회지
• /
• 제13권6호
• /
• pp.9-16
• /
• 2019

초음속 유동이 흐르는 후향 계단에서 액체 제트가 수직으로 분사되는 유동의 혼합 특성에 대한 실험적 연구를 수행하였다. 작동 유체는 질소와 물을 사용하였다. 쉐도우그래프 기법을 사용하여 유동을 가시화하였으며, 초고속 카메라로 촬영된 영상은 시간 평균화 처리를 통해 분석에 사용하였다. 액체 제트의 주입구는 초음속 질소가스 유동에 의해 생성되는 재순환 영역 내부에 위치하며 유동방향에 수직하게 분사된다. 실험 조건은 질소가스 챔버와 액체 가압탱크의 압력에 따라 나누었다. 각 실험 조건에서 분사된 액체 제트의 침투 깊이와 마하 디스크의 생성 위치의 변화를 관찰하였으며, 운동량비에 따른 유동의 구조 변화에 대해 고찰하였다.

• 한국수소및신에너지학회논문집
• /
• 제32권6호
• /
• pp.551-564
• /
• 2021

The use of clean energy based on the hydrogen economy is increasing rapidly due to the greenhouse gas reduction policies and the increase in the need for hydrogen. Currently, South Korea government have been considering a plan to construct hydrogen refueling stations at expressway service area for the purpose of supplying hydrogen vehicles. In the case of a hydrogen refueling stations, a quantitative risk assessment (QRA) must be performed because it includs and uses a high pressurized hydrogen storage tank. In this study, QRA was conducted using societal risk and F-N curve by the consequence assessment (CA) of jet fire and explosion according to the population density, capacity of the high pressurized hydrogen storage tank and frequency assessment (FA) data to the general hydrogen refueling stations systems in expressway service area. In the cases of jet with a leak diameter of 7.16 mm, regardless of expressway service area location, the societal risk was over 1E-04 that was acceptable for as Low As reasonably practicable (ALARP) region (workforce), but unacceptable for ALARP region (public). In the cases of gas explosion, all expressway service area satisfy ALARP region. In the case of the population density is over 0.0727, QRA for constructing the hydrogen refueling stations, must be conducted.

• Journal of Biosystems Engineering
• /
• 제30권1호
• /
• pp.25-31
• /
• 2005

There are more than three hundred garlic peeling facilities in Korea and most of them use pressurized air for skin peeling operation. One of the major problems of using air for the peeling operation is the occurrence of excessive bruises on the flesh of peeled garlic which causes easy microbial contamination and shortening of the shelf lift. To reduce the occurrence of bruises during the peeling operation, a new type of garlic peeling system was developed which use pressurized water. In this system, high pressure water jets were used to separate garlic bulbs and to peel the skin of garlic cloves. Six commercial systems of this type had been developed and installed at several locations in Korea. The design and performance of the latest system according to three pressure levels were described in this paper. Peeling efficiency of the system was as high as $64.7\%$ in one cycle of peeling operation by three chambers installed in series. Incorporation of a sorting system based on machine vision and re-circulation of unpeeled and partially-peeled garlic enhanced peeling efficiency by additional $30\%$, resulting in total peeling efficiency of the final products of approximately $95\%$. Peeling capacity of the system was over 400 kg per hour.

• Journal of Chest Surgery
• /
• 제36권6호
• /
• pp.431-435
• /
• 2003

개심술 후 발생하는 심부 흉골 창상감염(급성 종격동염)은 아주 심각한 합병증으로 높은 이환율, 사망률, 그리고 입원기간의 연장을 보인다 치료 결과는 주로 흉골 창상감염의 조기 진단과 적절한 외과적 조치에 의존한다. 개심술 후 심부 흉골 창상감염을 보였던 4예에서 광범위한 변연절제술, 항생제 용액의 높은 압력 하 세척, Robicsek방식에 의한 흉골의 재 고정, 항생제 용액을 사용한 세척-흡입법을 통해 성공적인 치료를 하였기에 문헌 고찰과 함께 보고한다.