• 정보보호학회논문지
• /
• 제21권4호
• /
• pp.27-37
• /
• 2011

d차의 고차 전력 분석은 d차 마스킹 기법에 의해 안전하게 방어할 수 있다. 하지만 이러한 고차의 마스킹 기법의 적용은 차수가 높아질수록 암호 시스템의 성능을 현저히 떨어뜨린다. 기존의 고차 전력 분석에 대한 통계적 접근은 이차 전력 분석에 대해서만 이루어져 있다. 하지만 이는 암호 설계자가 삼차 이상의 마스킹 적용 시 특별한 안전성의 기준이 없음을 의미하며 이러한 기준의 부재는 무의미하게 높은 차수의 마스킹 기법 적용으로 인해 암호 시스템의 성능을 상당히 저하시킬 수 있다. 본 논문에서는 이러한 기준을 마련하고자 고차 전력 분석에 대한 통계적 수치를 일반화하였다. 즉, 고차 전력 분석을 수행했을 때 연산되는 상관계수의 값을 일반화 시켰으며 이는 향후 마스킹 기법 사용 시 적용해야할 차수를 선택하기 위한 좋은 지표가 될 것이다.

• 한국통신학회논문지
• /
• 제10권5호
• /
• pp.250-257
• /
• 1985

고차 필터는 각 2차 함수를 종속연결함으로써 실현화한다. 본 논문에서는 다원함수의 고차 대여통과와 대역서지 필터 실현화에 있어서 전 동적범위를 향상시키기 위한 방법을 제시하였으며 고역통과 놋치, 저역통과 놋치 그리고 대칭 놋치등 각 2차함수들의 최적배열을 다원함수의 대역통과와 대역저지 필터에 적용하였다.

• International Journal of Control, Automation, and Systems
• /
• 제3권3호
• /
• pp.419-429
• /
• 2005

This paper considers eigenstructure assignment in high-order linear systems via proportional plus derivative feedback. It is shown that the problem is closely related with a type of so-called high-order Sylvester matrix equations. Through establishing two general parametric solutions to this type of matrix equations, two complete parametric methods for the proposed eigenstructure assignment problem are presented. Both methods give simple complete parametric expressions for the feedback gains and the closed-loop eigenvector matrices. The first one mainly depends on a series of singular value decompositions, and is thus numerically very simple and reliable; the second one utilizes the right factorization of the system, and allows the closed-loop eigenvalues to be set undetermined and sought via certain optimization procedures. An example shows the effect of the proposed approaches.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.259-261
• /
• 1996

In this paper, active input filter for power factor correction(PFC) circuit employing ripple arrent and voltage cancellation is proposed to reduce filter's size and cost, and to make filter design easy. Switching ripple current and voltage can be sensed through the secondary windings of filter inductor. Single stage passive filter can achieve high order filter characteristics by using active ripple current and voltage cancellation technique. Conventional high order passive filter and its problems are suggested. Analysis of active filter and design procedure are detailed. Simulation result is presented to verify high order filter characteristics of proposed scheme.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.382-385
• /
• 2006

A high-order spectral/boundary-element method is newly adapted as an efficient numerical tool. In this method, the velocity potential is expressed as the sum of surface potential and body potential. Then, surface potential is solved fly using the high-order spectral method and body potential is solved fly using the high-order boundary element method. Through the combination of these two methods, the wave-making problems fly a submerged sphere moving with the large amplitude oscillation are solved in time-domain. With the example calculations, nonlinear effects on free-surface profiles and hydrodynamic forces are shown and discussed.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1993년도 춘계학술대회
• /
• pp.45-48
• /
• 1993

High-order field gradients are useful for spatial localization of a volume of interest and dynamic range improvement of signal detection in NMR (Nuclear Magnetic Resonance) spectroscopy and imaging. This paper proposes a design method of shielded high-order gradient coils to reduce tile effect of eddy current on tile spectroscopy and imaging results. According to the experimental results, the shielded gradient coils produce less than 2 % eddy current compared to non-shielded coils. Two shielded $z^2$ gradient coils have been designed and constructed for 1.5 T whole-body and 3.0 T animal NMR imaging systems. Experimental results are in good agreement with the theoretically expected behavior and show the utility of the shielded high-order gradient coils.

• Structural Engineering and Mechanics
• /
• 제85권2호
• /
• pp.207-216
• /
• 2023

Three time-discontinuous Galerkin quadrature element methods (TDGQEMs) are developed for structural dynamic problems. The weak-form time-discontinuous Galerkin (TDG) statements, which are capable of capturing possible displacement and/or velocity discontinuities, are employed to formulate the three types of quadrature elements, i.e., single-field, single-field/least-squares and two-field. Gauss-Lobatto quadrature rule and the differential quadrature analog are used to turn the weak-form TDG statements into a system of algebraic equations. The stability, accuracy and numerical dissipation and dispersion properties of the formulated elements are examined. It is found that all the elements are unconditionally stable, the order of accuracy is equal to two times the element order minus one or two times the element order, and the high-order elements possess desired high numerical dissipation in the high-frequency domain and low numerical dissipation and dispersion in the low-frequency domain. Three fundamental numerical examples are investigated to demonstrate the effectiveness and high accuracy of the elements, as compared with the commonly used time integration schemes.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.137-138
• /
• 2017

Generally, a lot of reinforcements are used in nuclear power plant concrete structures in order to improve the structural safety, but it may cause several potential problems due to the overcrowded reinforcement, such as the degradation of concrete quality, the construction delay and the increase of construction cost. In order to resolve these problems, structural test researches and code change studies on using high-strength reinforcement (Gr.80) in unclear power plant structures are under way, and there is good progress in code change of ASM BPVC.III.2 and ACI 349. This purpose of this study is to review the code change status ASM BPVC.III.2, ACI 349 under way to use the high-strength reinforcement in nuclear power plant structures. Also I will introduce the design optimization of NPP structures with high-strength reinforcements in order to maximize the effect and minimize the problem when using the high-strength reinforcements in NPP structures.

• Structural Engineering and Mechanics
• /
• 제76권6호
• /
• pp.675-685
• /
• 2020

As the classical response surface method (RSM), the polynomial RSM is so easy-to-apply that it is widely used in reliability analysis. However, the trade-off of accuracy and efficiency is still a challenge and the "curse of dimension" usually confines RSM to low dimension systems. In this paper, based on the univariate decomposition, the polynomial RSM is executed in a new mode, called as DPRSM. The general form of DPRSM is given and its implementation is designed referring to the classical RSM firstly. Then, in order to balance the accuracy and efficiency of DPRSM, its adaptive order revision around the most probable point (MPP) is proposed by introducing the univariate polynomial order analysis, noted as RDPRSM, which can analyze the exact nonlinearity of the limit state surface in the region around MPP. For testing the proposed techniques, several numerical examples are studied in detail, and the results indicate that DPRSM with low order can obtain similar results to the classical RSM, DPRSM with high order can obtain more precision with a large efficiency loss; RDPRSM can perform a good balance between accuracy and efficiency and preserve the good robustness property meanwhile, especially for those problems with high nonlinearity and complex problems; the proposed methods can also give a good performance in the high-dimensional cases.

• 한국간호교육학회지
• /
• 제1권1호
• /
• pp.46-61
• /
• 1995

The purpose of this study was to identify the degree of learning desire in the health education of military drill curriculum and to furnish basic data for the effective health education at high school. A total of 594 high school students were participated in the questionnaires and the 12 domains & the 55 questions were utilized for this study. The survey was conducted from March 15 to March 27, 1993 and the collected date were analized by T-test and F-test. The results of this study are as followings : 1. In the 12 domains, respondents indicated high degree of learning desire in 'human & sex', 'nutrition' and 'disease of adult' in that order. However 'accident & disaster', 'transport & management' and 'nursing' were not highly ranked. 2. In the 55 questions, respondents showed high degree of learning desire in 'artificial respiration' & 'cardiopulmonary resuscitation', 'precautionary of adult disease' and 'sex & sex moral' in that order, but low degree of learning desire in 'the management of many wounded persons' and the 'synopsis of nursing'. 3. Comparing the degree of learning desire by grade, the 1st, the 3rd and the End grade were ranked in that order. The 1st and 3rd graders showed higher degree of learning desire in 'human & sex', and the 2nd graders in 'nutrition'. 4. Also, female students showed higher degree of learning desire than male students in general. Female students indicated it in 'nutrition', 'human & sex' and 'adult disease' in that order while male students in 'human & sex', 'adult disease' and 'nutrition' in that order. 5. The academic high school students showed higher degree of learning desire than the vocational high school students. 'Human & sex' was highest ranked at both academic and vocational high school students.