• 한국재료학회지
• /
• 제28권12호
• /
• pp.763-768
• /
• 2018

In this study, glass fibers are fabricated via a continuous spinning process using manganese slag, steel slag, and silica stone. To fabricate the glass fibers, raw materials are put into an alumina crucible, melted at $1550^{\circ}C$ for 2 hrs, and then annealed at $600^{\circ}C$ for 2 hrs. We obtain a black colored glass. We identify the non-crystalline nature of the glass using an XRD(x-ray diffractometer) graph. An adaptable temperature for spinning of the bulk marble glass is characterized using a high temperature viscometer. Spinning is carried out using direct melting spinning equipment as a function of the fiberizing temperature in the range of $1109^{\circ}C$ to $1166^{\circ}C$, while the winder speed is in the range of 100rpm to 250rpm. We investigate the various properties of glass fibers. The average diameters of the glass fibers are measured by optical microscope and FE-SEM. The average diameter of the glass fibers is $73{\mu}m$ at 100rpm, $65{\mu}m$ at 150rpm, $55{\mu}m$ at 200rpm, and $45{\mu}m$ at 250rpm. The mechanical properties of the fibers are confirmed using a UTM(Universal materials testing machine). The average tensile strength of the glass fibers is 21MPa at 100rpm, 31MPa at 150rpm, 34MPa at 200rpm, and 45MPa at 250rpm.

• 대한기계학회논문집
• /
• 제19권1호
• /
• pp.79-86
• /
• 1995

The structural materials for cryogenic technology have been recently developed to support the many modern large-scale application from superconducting magnets for nuclear fusion reactor, magnetic levitation railway to LNG tankers. However it is pointed out that quenching phenomenon is one of the serious problems for the integrity of these applications, which is mainly attributed to the rapid temperature rising in the material due to some extrinsic factors of structures. From the viewpoint of fracture mechanics, it is therefore very important to clarify the mechanism of temperature rising of structural material due to cyclic loading at cryogenic temperature. From this purpose, fatigue test was carried out for high manganese steel at liquid helium temperature(4.2K) using triangular stress waveform to identify both the mechanism of temperature rising near crack tip and the effect of loading stress waveform on temperature rising near crack tip and the effect of loading stress waveforms on temperature rising. As the results, two types of temperature rising, that is, regular and burst types were observed. And a periodical temperature rising corresponding to the stress waveforms was also found. The peaks of the temperature rising were recorded near both the maximum and the minimum values of the applied stress. The sudden temperature rises, which indicated the higher values than those of periodical temperature rises under the repetition of stress, were observed at the final region of crack growth. It was shown that the peak values of the temperature rising increased with stress intensity factor range.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제15권3호
• /
• pp.197-206
• /
• 2015

Failure analysis of pre-insulated pipe (SPPS 380, 400A) transporting high temperature water ($95{\sim}110^{\circ}C$) for a plant was carried out. The damaged area (${\Phi}5mm$) of pre-insulated pipe was found only on welds. The chemical composition of damaged pipe meets specification of carbon steel pipes for pressure service (KS D 3562). As results of microstructure analysis, crack propagated from outer to inside after pitting corrosion occurred on the outside surface. The non-metallic inclusion existed on the end of crack. And the non-metallic inclusion continuously and linearly formed along with the bond line of welds. Based on SEM-EDS analysis, the nonmetallic inclusions have higher Manganese (Mn) and Oxygen (O) content but sulfur (S) was not detected. As results of water quality analysis, hydrogen ion concentration and minerals like Fe, Mg, Si were in low level. But the content of dissolved oxygen (11.2 ppm) was slightly higher than that of standard. It seems that the cause of damaged pipe is grooving corrosion due to MnO inclusion formed on bond line and corrosion took place nearby welds.

• 자원리싸이클링
• /
• 제23권3호
• /
• pp.51-60
• /
• 2014

본 연구는 35여종의 희유금속을 대상으로 광석(정광), 금속, 화합물, 스크랩 등 4개 유형으로 광종별 원재료를 범주화하고 교역 구조를 분석하였다. 우리나라 희유금속원재료 교역 규모는 점차 확대되어 교역 증가폭이 GDP 증가폭을 큰 폭으로 상회하고 있다. 희유금속 원재료는 실리콘, 니켈, 크롬, 몰리브덴, 망간 등 철강원료자원 위주로 수입이 주로 이루어지고 있으며 전자공업원료자원 중 인듐, 게르마늄 등은 총교역규모 1억불 이하의 작은 규모로 수입추이변화에 미치는 영향은 제한적이나 연간증가율이 20%를 상회하여 지속적인 수급관리가 필요하다. 수입규모는 수출규모의 약 3배이며 희유금속 원재료 수출입 유형은 국내산업구조 및 수요의 특성에 따라 광종별로 다양한 양상을 보이고 있으나 수입, 수출 모두 상당수가 금속형태로 교역이 이루어지고 있다.

• 자원리싸이클링
• /
• 제32권6호
• /
• pp.67-78
• /
• 2023

첨단산업의 원재료로 사용되는 희유금속은 국내 산업구조변화와 기술변화에 따라 수요구조와 공급망이 변화하며, 가격 변동성이 높아 주기적으로 수요구조 변화분석을 시행하는 것이 필요하다. 국내에서는 대부분의 희유금속 수요를 수입에 의존하고 있어 교역구조 변화를 분석하는 것을 통해 국내 수요변화를 확인할 수 있다. 본 연구에서는 희유금속 35종을 대상으로 광석(정광), 금속, 합금, 화합물, 스크랩 등 5개 유형별로 2000년부터 2022년까지 교역규모, 교역증가율, 교역순위, 교역국가 등의 변화를 분석하였다. 우리나라 희유금속 원재료 교역은 '09년과 '16년의 큰 폭의 하락을 제외하고는 2000년대 이후 전반적으로 증가하는 추세로, 수출과 수입을 모두 포함하는 총교역규모는 '01년 대비 '22년 10배가량 증가하였다. 2010년대 중반까지는 규소, 니켈, 크롬, 몰리브덴, 망간 등 철강산업 원료 위주로 교역이 이루어졌으나 그 이후에는 팔라듐, 로듐, 백금 등의 백금족과 리튬, 코발트 등의 이차전지 원료의 교역이 증가하였다. 특히 '22년에는 리튬의 수요증가와 가격급등으로 인해 리튬이 가장 큰 교역 비중을 차지하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제20권2호
• /
• pp.237-244
• /
• 2007

An experiment was conducted to study the growth performance, bone mineralization and mineral excretion in broiler starter chicks fed high levels of cholecalciferol (CC) at sub-optimal levels of calcium (Ca) and non-phytate phosphorus (NPP). Five hundred and sixty day-old Vencobb female broiler chicks were housed in raised wire floor stainless steel battery brooder pens ($24"{\times}30"{\times}18"$) at the rate of five chicks per pen. A maize-soyabean meal basal diet was supplemented with dicalcium phosphate, oyster shell powder and synthetic CC to arrive at two levels each of Ca (0.50 and 0.60%), and NPP (0.25 and 0.30%) and four levels of CC (200, 1,200, 2,400 and 3,600 ICU/kg) in a $2{\times}3{\times}4$ factorial design. Each diet was fed ad libitum to chicks in 7 pens from 2 to 21days of age. Body weight gain, feed intake and bone weight increased (p<0.05) with increase in level of CC at both the Ca and NPP levels tested. The CC levels required to obtain significant improvement in body weight gain and feed intake reduced (2,400 ICU/kg vs. 1,200 ICU/kg) with increase in levels of P in diet (0.25% vs. 0.3%, respectively). The feed conversion ratio was significantly improved (p<0.05) with increase in level of CC from 200 to 1,200 ICU/kg diet at 0.5% Ca, while at 0.6% Ca, the level of CC in diet did not influence the feed efficiency. Tibia mineralization (density, breaking strength and ash content) and Ca and P contents in serum increased significantly (p<0.05) with increase in levels of CC in diet. The CC effect on these parameters was more pronounced at lower levels of Ca and NPP (0.5 and 0.25%, respectively). The data on body weight gain and feed intake indicated that NPP level in diet can be reduced from 0.30 to 0.25% by increasing CC from 200 to 2,400 ICU/kg. Similarly, the bone mineralization (tibia weight, density and ash content) increased non-linearly (p<0.01) with increase in CC levels in diet. Concentrations of P and Mn in excreta decreased (p<0.01), by increasing CC level from 200 to 2,400 ICU/kg diet. It can be concluded that dietary levels of Ca and NPP could be reduced to 0.50 and 0.25%, respectively by enhancing the levels of cholecalciferol from 200 to 2,400 ICU/kg with out affecting body weight gain, feed efficiency and bone mineralization. Additionally, phosphorus and manganese excretion decreased with increase in levels of CC in broiler diet.