• Resources Recycling
• /
• v.16 no.5
• /
• pp.57-64
• /
• 2007

Triboelectrostatic separation of mixed three kinds of plastics, PVC, PET and PMMA, in the range of similar gravity has been performed through a two-stage separation process. Polypropylene (PP) and high-impact polystyrene (HIPS) were found to be the most effective materials for a tribo-charger in the separation of PVC, PET and PMMA. In the 1st stage using the PP cyclone charger, PVC grade and recovery depended considerably on the air velocity (10 m/s), the relative humidity (<30%), the electric field (>200 kV/m) and the splitter position (+2 cm from the center) in the triboelelctrostatic separator unit. At an optimum condition a PVC grade of 99.6% and a recovery of 97.5% was achieved. In the 2nd stage using the HIPS cyclone charger, a PMMA grade of 98.3% and a recovery of 97.0% was obtained under the conditions of 10m/s air velocity, over 250 kV/m electric field, central splitter position and less than 40% relative humidity.

• Polymer(Korea)
• /
• v.32 no.4
• /
• pp.347-352
• /
• 2008

High impact polystyrene (HIPS) nanocomposites with organically modified montmorillonite (organoclay) via in situ polymerization were synthesized, and the effects of organoclay incorporation on material properties were investigated. Organoclays having a reactive group, vinylbenzyltrimethyl clay (VBC) and octadecylvinylbenzyldimethyl clay (ODVC), were prepared by the ion-exchange reactions of sodium montmorillonite with vinylbenzyltrimethyl ammonium chloride (VBTMAC) and octadecylvinylbenzyldimethyl ammonium bromide (ODVBDAB), respectively, and a commercial organoclay, $Cloisite^{(R)}$ 10A(C10A), was used for comparison. It was confirmed that the X-ray diffraction (XRD) peak of the nanocomposites prepared by ODVC disappeared, which indicates the exfoliation of silicate layers. On the contrary, the XRD peak of the nanocomposites prepared by C10A shifted to lower angle, indicative of the intercalation of polymer chains into silicate layers. Rheological properties such as storage modulus and complex viscosity increased with increasing organoclay.

• Polymer(Korea)
• /
• v.27 no.4
• /
• pp.377-384
• /
• 2003

High impact polystyrene/organically modified layered silicate (HIPS/OLS) nanocomposites by in situ polymerization were synthesized to investigate the effect of clay on the particle size and properties of rubber. In the OLS, the montmorillonite having benzyl group showed best dispersion in polystyrene phase. With the addition of clay, the intercalated peak from XRB was confirmed, but the peak gradually shifted to lower angle as rubber concentration increased. Thus, it is speculated that the organoclay disperses better in rubber phase than in polystyrene phase. The average rubber particle size increased and the particle size distribution widened as the amount of clay increased, which may be caused by the increase of the viscosity ratio of rubber to polystyrene phases and the unstable dispersion. The materials having clay showed improved thermal properties from thermogravimetric analysis. Rheological properties such as complex viscosity and storage modulus increased as the amount of clay increased.

• Polymer(Korea)
• /
• v.32 no.3
• /
• pp.251-255
• /
• 2008

This study suggested antistatic material which can increase anti-static properties and mechanical strength by mixing polystyrene for conveying electronic stuffs with metal salt and ester compound as a anti-static agent. We studied about mechanical, thermal and electrical characteristics by changing the contents of MAH of poly(styrene-co-maleic anhydride), compatibilizer. As the result of measuring residue space charge of the blends of HIPS(75)/TPU(25)/poly(styrene-co-maleic anhydride)(MAH weight ratio : 25, 32, 43.5 wt%), we could find small residue charge in the blend which MAH(25 wt%) was added and it showed the highest values in tensile strength. Additionally we found out the material to which compatibilizer was added kept better anti-static properties than one to which compatibilizer was not added. In the event we could confirm that the adding of PS-co-MAH enables two polymers were mixed well when HIPS/TPU was blended and anti-static agent made easier dissipative in the blend.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.8
• /
• pp.2661-2665
• /
• 2011

We studied the effect of structural and morphological changes on the conductivity of a stretched conducting polymer film. To improve the poor processability of polyaniline, we used dodecylbenzenesulfonic acid as both a surfactant and a dopant during emulsion polymerization, followed by blending with high-impact polystyrene. UV-Vis/NIR spectra were obtained to observe conformational changes, and SEM and AFM were used to investigate morphological changes. FT-IR dichroism was applied to determine the microscopic orientation, and XRD patterns were obtained for quantitative crystallinity analysis. The electrical conductivity (${\sigma}_{\parallel}/{\sigma}_{\perp}$) was measured as a function of draw ratio. We found a clear correlation between morphological changes and (${\sigma}_{\parallel}/{\sigma}_{\perp}$), especially at the stretching limit. The conductivity of the films can be modified according to the desired application by controlling their structure and morphology.

• Elastomers and Composites
• /
• v.33 no.1
• /
• pp.3-9
• /
• 1998

The production of polyurethane polymer has been increased because of their unique properties and variety process methods available. The generation of their wastes also increases with products. These byproducts of industrialization seriously threaten the environmental demanding. Therefore, development of the recycling technologies have been required. The main propose of this study is to develop the recycling technology of waste polyurethane from a footwear scrap. This technique is composed of the following procedure : crushing, devulcanizing, pelletizing, washing and drying. The pellet was characterized with various methods. The recycled polyurethane(RPU) was blended with HIPS(high impact polystyrene) and investigated morphologically and rheologically. The experimental results showed that the addition of 20% HIPS to RPU was limited without mechanical performance of the superial properties of a virgin polyurethane. We believe that these technical information make possible to develop a rational engineering product.

• Bulletin of the Korean Chemical Society
• /
• v.12 no.1
• /
• pp.52-57
• /
• 1991

To find optimum conditions necessary in converting physical properties of any resin into those of others, eleven kinds of HIPS (High-Impact Polystyrene) resins were prepared. First physical properties of eleven samples divided into three groups are analyzed by a torque rheometer (named Plasti-Corder, Model No.: PLD 651) and GPC (Gel Permeation Chromatography), and then optimum conditions on conversion among samples are obtained by calculation from computer simulation so that any sample subjected to each group can show physical properties of other samples in its group. Even though the kind of plasticizer of any sample is different with others in its group, once optimum conditions on conversion among samples are met, it is found that physical properties of any sample are identical or similar to those of others in each group.

• Polymer(Korea)
• /
• v.33 no.6
• /
• pp.608-614
• /
• 2009

The cation-exchange membrane which was sulfonated styrene-ethylene/buthlene-styrene(SEBS) block copolymer containing the high impact polystyrene (HIPS) was prepared via post-sulfonation and casting method using the epoxidized polybutadiene and divinylbenzene as crosslinking agents. Post-sulfonation was carried out with sulfuric acid as sulfonating agent and silver sulfate as initiator in the nitrogen atmosphere. The basic properties of membranes, degree of sulfonation (DS), water uptake, ion-exchange capacity (IEC), electrical resistance, and modulus have been examined. DS of membrane increased with increasing the sulfonation time. The maximum DS of membrane containing 10 wt% HIPS was 83.6 %. The water uptake and IEC of membranes gradually increased as increasing the DS. The maximum water uptake and IEC of membranes were 43.8 % and 1.14 meq/g, respectively. The lowest electrical resistance of membrane containing the 20 wt% HIPS was $83\;\Omega{\cdot}cm^2$. The electrical conductivity of membrane containing 10 wt% HIPS was $1.22\times10^{-4}S/cm$. The modulus of membrane increased with increasing DS and these values were 153 and $204\;kgf/cm^2$ before and after sulfonation, respectively.

• Progress in Medical Physics
• /
• v.30 no.4
• /
• pp.155-159
• /
• 2019

Radiological properties of newly introduced and existing 3-dimensional (3D) printing materials were evaluated by measuring their Hounsfield units (HUs) at varying infill densities. The six materials for 3D printing which consisted of acrylonitrile butadiene styrene (ABS), a unique ABS plastic blend manufactured by Zortrax (ULTRAT), high impact polystyrene (HIPS), polyethylene terephthalate glycol (PETG), polylactic acid (PLA), and a thermoplastic polyester elastomer manufactured by Zortrax (FLEX) were used. We used computed tomography (CT) imaging to determine the HU values of each material, and thus assess its suitability for various applications in radiation oncology. We found that several material and infill density combinations resembled the HU values of fat, soft tissues, and lungs; however, none of the tested materials exhibited HU values similar to that of bone. These results will help researchers and clinicians develop more appropriate instruments for improving the quality of radiation therapy. Using optimized infill densities will help improve the quality of radiation therapy by producing customized instruments for each field of radiation therapy.

• Elastomers and Composites
• /
• v.55 no.1
• /
• pp.46-50
• /
• 2020

Material extrusion (ME)-type 3D printing is the most popular among the 3D printing processes. In this study, the cross-section morphologies of ME-type 3D printing manufactured specimens were observed with respect to the thermal properties of the material. The cross-section morphology of a specimen is related to the deposition strength, and the outside profile of the cross-section is related to the surface roughness. The filaments used in this study, with different thermal conductivities, were the acrylonitrile-butadiene-styrene (ABS), the high impact polystyrene (HIPS), the glycol-modified polyethylene terephthalate (PETG), and the polylactic acid (PLA). The cross-sections and the surfaces of the 3D manufactured specimens were examined. In ME-type 3D printing, the filaments are extruded through a nozzle and they form a layer. These layers rapidly solidify and as a result, they become a product. The thermal conductivity of the material influences the cooling and solidification of the layers, and subsequently the cross-section morphology and the surface roughness.