• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.80-83
• /
• 1999

We have studied properties(crystal structure, density, absorption, contraction, initial permeability, and permeability) of Ni$_{0.175-x}$Cu$_{x}$Zn$_{0.33}$Fe$_{0.495}$ (x=0~0.175) ferrites with various NiO and CuO, because of development of materials for high frequency inductor. The XRD peaks of all of samples were observed only spine이 phase. As a results of the density, absorption rate, and shrinkage rate, the grain growth progressed rapidly in x=0.1 at 95$0^{\circ}C$, x=0.075 at 105$0^{\circ}C$, and x=0.025 at 115$0^{\circ}C$ for 3 hours. Initial permeability increased with increasing CuO concentration until x=0.1, and then decreased. The complex permeability as a function frequency were high values at sintered 105$0^{\circ}C$ fotr3 hours in x=0.075, 0.1., 0.1.1.

• 한국재료학회지
• /
• 제15권2호
• /
• pp.106-111
• /
• 2005

Effects of stainless steel-making dusts and binder content on compacting $density(\rho)$ and magnetic properties were evaluated. Cores compacted with the mixture of pure Fe powders, $5wt.\%$ dusts and $0.25wt.\%$ binder showed good AC magnetic properties. For example, permeability$({\mu}a)$ and core loss(P) of the cores containing $5wt.\%$ dusts at 500 kHz were 62 and $4008\;{\mu}W/cm^3$, respectively. These properties are almost equivalent to those of competitor's products (i.e, Ancorsteel TC 80 produced by $H\ddot{o}gan\ddot{a}s$ Corp.). The powdered cores obtained from the present work are expected to apply for high-performance soft magnetic components such as normal mode choke filter and pulse transformer.

• Journal of Magnetics
• /
• 제13권3호
• /
• pp.92-96
• /
• 2008

There are few reports of high frequency loss behavior in the near-field for magnetic films with semiconducting properties, even though semiconducting magnetic materials, such as soft magnetic amorphous alloys and nanocrystalline thin films, have been demonstrated. The electromagnetic loss behavior of multilayer magnetic films with semiconducting properties on the microstrip line in quasi-microwave frequency band was analyzed numerically using a commercial finite-element based electromagnetic solver. The large increase in the absorption performance and broadband characteristics of the semiconducting/insulating layer magnetic films examined in this study were attributed to an increase in the loss factor of resistive loss. The electromagnetic reflection increased significantly with increasing conductivity, and the loss power deteriorated significantly. The numerical results of the magnetic field distribution showed that a strong radiated signal on the microstrip line was emitted with increasing conductivity and decreasing film thickness due to re-reflection of the radiated wave from the surface of the magnetic film, even though the emitted levels varied with film thickness.

• 한국자기학회지
• /
• 제5권5호
• /
• pp.500-503
• /
• 1995

The magnetic properties of ultrathin $Fe_{84}B_{9}Nb_{7}$ nanocrystalline ribbon alloy with the thickness of $7-14\;\mu\textrm{m}$ were investigated. It was found that the effective permeability at the frequency over 100 kHz increased with decreasing ribbon thickness. Moreover the core loss decreased considerably with reduction of the ribbon thickness. The effective permeability at 1 MHz and the core loss at 1 MHz and 0.1 T for $Fe_{84}B_{9}Nb_{7}$ alloy with the thickness of $7\;\mu\textrm{m}$ were 3,700 and 2.7 W/cc, respectively. The reduction of thickness to less than $10\;\mu\textrm{m}$ was found to be very effective in obtaining high permeability and low core loss in the MHz frequency range. It was considered that the improvement of magnetic properties in the high frequency range was due to the reduction of the eddy current.

• 한국분말재료학회지
• /
• 제24권2호
• /
• pp.122-127
• /
• 2017

Fe-6.5 wt.% Si alloys are widely known to have excellent soft magnetic properties such as high magnetic flux density, low coercivity, and low core loss at high frequency. In this work, disc-shaped preforms are prepared by spark plasma sintering at 1223 K after inert gas atomization of Fe-6.5 wt.% Si powders. Fe-6.5 wt.% Si sheets are rolled by a powder hot-rolling process without cracking, and their microstructure and soft magnetic properties are investigated. The microstructure and magnetic properties (saturation magnetization and core loss) of the hot-rolled Fe-6.5 wt.% Si sheets are examined by scanning electron microscopy, electron backscatter diffraction, vibration sample magnetometry, and AC B-H analysis. The Fe-6.5 wt.% Si sheet rolled at a total reduction ratio of 80% exhibits good soft magnetic properties such as a saturation magnetization of 1.74 T and core loss ($W_{5/1000}$) of 30.7 W/kg. This result is caused by an increase in the electrical resistivity resulting from an increased particle boundary density and the oxide layers between the primary particle boundaries.

• 한국자기학회지
• /
• 제8권4호
• /
• pp.241-248
• /
• 1998

본 연구에서는 micro magnetic device의 제작과 특성 분석을 위하여 고주파수 대역에서 사용가능한 자성체의 개발과 meander형 마이크로 코일의 가공 기술 확립에 그 목적을 두었다. 자성체로서는 DC magnetron reactive sputtering system에 의해 제조된 초 미세결정구조를 갖는 FeTaC, FeTaN막을 사용하였으며, 그 자기적 특성은 다음과 같다. Bs:13~17kG, Hc:0.1~0.2Oe, $\mu$':2000~4000. 전기 도금법에 의해 제작된 Cu코일은 2$\mu$$\Omega$-cm의 비저항을 나타내었으며, 공심형 5turn 언덕터의 경우에는 50nH의 인덕턴스와 700MHz의 공진 주파수 그리고 200MHz에서 30의 성능 지수를 보였다. 또한 meandergudxo의 폐자로 인덕터에서 인덕턴스는 150nH, 공진 주파수는 100MHz, 그리고 성능지수는 10~30 MHz에서 4의 값을 나타내었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.303-305
• /
• 2000

The effect of anisotropy field on the high frequency magnetic characteristics of FeTaN films was investigated. Those films show good magnetic properties : 4$\pi$Ms of 13KG, Hc of 0.6 Oe, effective permeability(${\mu}$') of 800 with a stable frequency response up to 800MHz. The films also show a large anisotropy field(Hk) over 21Oe. It result from the increased anisotropy of patterned FeTaN films. The combination of high saturation magnetization and relatively high Hk in these films is believed to the partly responsible for FeTaN for the excellent high-frequency behavior.

• 한국자기학회지
• /
• 제5권5호
• /
• pp.597-600
• /
• 1995

The effects of surface oxidation on magnetic properties were investigated at high frequencies (10k-100MHz) for $7-18\mu\textrm{m}$ thick $Co_{70}Fe_{5}Si_{15}B_{10}$ amorphous ribbons with controlled domain structure. Oxidation was accelerated by acid-treatment or anodic oxidation treatment, and the insulation layers were prepared on the surfaces of the ribbons. The acid-treatment was effective in improving permeability and magnetic loss. Although the anodic oxidation treatment was effective in both making oxide layer and thinning, the magnetic properties were not improved compared with the case of the acid-treatment.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2008년도 Asian Magnetics Conference
• /
• pp.20-20
• /
• 2008

• Journal of Magnetics
• /
• 제1권2호
• /
• pp.90-93
• /
• 1996

For the design of high efficiency electric machines, analysis of higher harmonic frequency components of the magnetic induction is necessary. We have measured ac magnetic properties of non-oriented silicon steel under harmonic frequencies ranging from $3^rd$ (180 Hz) to $9^th$(540 Hz) and harmonic amplitude components from 10% to 50% of the total amplitude ($B_max$=1.5T). From the experiment, it is found that, if the magnetic induction waveform has above $9^th$ harmonic frequency components of the magnetic induction, the core losses only depended on the harmonic amplitude component, but if harmonic frequency becomes lower than 9th harmonic frequency, the core losses depend on the phase angle and the harmonic amplitude, and phase angle should be considered in the design of electric machine.