• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.5
• /
• pp.225-232
• /
• 2009

In this paper, a new face detection method based on pupil color distribution maps with the frequency under the illumination variance is proposed. Face-like regions are first extracted by applying skin color distribution maps to a color image and then, they are reduced by using the standard deviation of chrominance components. In order to search for eye candidates effectively, the proposed method extracts eye-like regions from face-like regions by using pupil color distribution maps. Furthermore, the proposed method is able to detect eyes very well by segmenting the eye-like regions, based on a lighting compensation technique and a segmentation algorithm even though face regions are changed into dark-tone due to varying illumination conditions. Eye candidates are then detected by means of template matching method. Finally, face regions are detected by using the evaluation values of two eye candidates and a mouth. Experimental results show that the proposed method can achieve a high performance.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.6
• /
• pp.510-521
• /
• 2002

MBE (multi-band excitation) coder can achieve high qualify synthetic speech below 4.0 kbps. There are, however, significant differences of the fine structure between the original spectrum and the synthetic spectrum. They are mainly due to the exclusive partition of voiced and unvoiced regions in frequency domain and the decision procedure based on the experimental threshold. This paper proposes MMBE (mixed multi-band excitation) speech model to overcome drawbacks of a MBE coder. In addition, two analysis methods, which do not need my decision procedure based on a threshold, are presented. Both voiced and unvoiced components can be mixed over all the frequency axis in the MMBE speech model. To illustrate the potential of the proposed speech model, we develop a 2.6 kbps MMBE coder and compare it with a 2.9 kbps MBE coder by both objective and subjective methods. The results have shown that the proposed coder has a better performance even at a lower bit-rate compared with the MBE coder.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.5
• /
• pp.462-473
• /
• 1999

This paper addresses the current measurement issue of all digital field oriented control of ac motors. The p paper focuses on the effect of low-pass filter and also on the sampling of the fundamental component of the m motor current. The low-pass filter, which suppresses the switching noise of the motor current, introduces v variable phase delay according to the current ripple frequency. It is shown that the current sampling error c consists of the fundamental component and high frL'quency ripple components. In this paper, the dependency of t this current sampling e$\pi$or on the reference voltage vector is investigated analytically and a sampling technique i is proposed to minimize the error. The work is based on the three phase symmetry pulse width modulation l inverter driving an induction machine. With this technique, the bandwidth of current regulator can be extended t to the limit given by the switching frequency of the inverter and more precise torque regulation is possible.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.8
• /
• pp.392-398
• /
• 2006

The properties of tunable dielectric materials on RF frequency band are important high tunability and low loss for RF variable devices, variable capacitor, phased array antenna and other components application. Various composite of BST(barium strontium titanate) ratio combined with other non-electrical active oxide ceramics have been formulated for such uses. We present the tunable properties and Curie temperature on BST thick films. The grain growth of the weight ratio of $BaTiO_3$ increased. This can be explained by the substitute $Sr^{2+}$ ion for $Ba^{2+}$ ion in the $BaTiO_3$ system. The Curie temperature was shifted to lower temperature with increasing $SrTiO_3$in the $BaTiO_3-SrTiO_3$ system, because of decreasing the lattice constant. Also, the dielectric constant, tunability and K-factor of $(Ba_xSr_{1-x})TiO_3$ at over the Curie temperature decreased, at over the $60^{\circ}C$ fixation, maximum dielectric constant at Curie temperature and hence sharper phase transformation occurred at Curie temperature. The result were interpreted as a process of internal stress relaxation resulting form the increase of $90^{\circ}$ domains induced the BST. As a result, It is concluded that over the Curie temperature, frequency response and DC field effect for the tunable properties of BST thick film are suppressed by the transition broadening. For the application of tunable devices, that the curie temperature was investigated to be increased.

• Journal of Satellite, Information and Communications
• /
• v.9 no.1
• /
• pp.107-114
• /
• 2014

The satellite 2.1 GHz frequency bands, 1980-2010 MHz and 2170-2200MHz are allocated for mobile satellite service including satellite IMT, while it does not preclude the use of these bands for mobile services. The concept of an integrated satellite/terrestrial network has been introduced in worldwide because the terrestrial use in these bands adjacent to existing terrestrial IMT bands is attractive to provide mobile broadband services. The integrated satellite/terrestrial infrastructure with a high degree of spectrum utilization efficiency has the ability to provide both multimedia broadband services and public protection and disaster relief solutions. In addition, it is required to consider interference issues between the terrestrial and satellite components in order to reuse the same frequency band to both satellite and terrestrial component. This paper analyzes the interference for satellite uplink in the satellite/terrestrial integrated system and the interference reduction scheme for satellite uplink interfered by terrestrial user equipment.

• Journal of Satellite, Information and Communications
• /
• v.8 no.4
• /
• pp.81-88
• /
• 2013

The satellite 2.1 GHz frequency bands, 1980-2010 MHz and 2170-2200MHz are allocated for mobile satellite service including satellite IMT, while it does not preclude the use of these bands for mobile services. The concept of an integrated satellite/terrestrial network has been introduced in worldwide because the terrestrial use in these bands adjacent to existing terrestrial IMT bands is attractive to provide mobile broadband services. The integrated satellite/terrestrial infrastructure with a high degree of spectrum utilization efficiency has the ability to provide both multimedia broadband services and public protection and disaster relief solutions. In addition, it is required to consider interference issues between the terrestrial and satellite components in order to reuse the same frequency band to both satellite and terrestrial component. This paper analyzes the interference for satellite downlink in the satellite/terrestrial integrated system and presents the interference mitigation techniques for satellite mobile earth station interfered by terrestrial base stations.

• Journal of Advanced Navigation Technology
• /
• v.12 no.2
• /
• pp.139-145
• /
• 2008

There has been lots of studies on communication systems using millimeter wave recently in many countries, specially in newly assigned 57GHz ~ 64GHz ISM band. Among those studies, IEEE 802.15.3c standard proposes OFDM (Orthogonal Frequency Division Multiplexing) systems for high data rate transmission support. But OFDM method has the PAPR (peak-to-Average Power Radio) problem The PAPR problem is to decline the performance of the transmission system due to signals distorted severely when passing through nonlinear components such as ADC/DAC and power amplifiers. In order to solve the problem of P APR, this paper suggests SSC (Sine Soft Clipping) and analyzes the PAPR, CCDF, PSD, BER by applying SAW(Surface Acoustic Wave) filter and power amplifiers to IEEE 802.15.3.c OFDM WPAN systems.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.12 s.103
• /
• pp.1186-1193
• /
• 2005

In this paper, a new 3 dB branch line hybrid using asymmetric spiral-shaped defected ground structure(DGS) microstrip is proposed. The proposed branch line hybrid suppresses the 2nd and the 3rd harmonic component effectively. Also a DGS $\lambda$/4 bias line that can suppress high frequency harmonics as well as low frequency intermodulation component is proposed. With the harmonic termination tuner using the proposed hybrid and the harmonic blocking bias line, the 2nd and the 3rd harmonic components of the fabricated amplifier that operated in IMT-2000 basestation transmitting band were suppressed up 25 dB and 27 dB, respectively. The proposed harmonic load-pull setup of amplifier is more easily accomplished with proposed circuits than the previous.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.1
• /
• pp.1-10
• /
• 2005

This paper presents a wideband LPA (local polynomial approximation) beamforming algorithm that is appropriate for wideband moving sources. The Proposed wideband LPA algorithm adopts STMV (steered minimum variance) method that utilizes a steered covariance matrix obtained from multiple frequency components in one data snapshot, instead of multiple data snapshots in one frequency bin. The wideband LPA cost function is formed using STMV weight vector. The Proposed algorithm searches for the instantaneous DOA and angular velocity that maximize the wideband LPA cost function. resulting in a higher resolution performance than that of a DS LPA beamforming algorithm. Several simulations using artificial data and sea trial data are used to demonstrate the performance of the Proposed algorithm.

• The KIPS Transactions:PartA
• /
• v.8A no.2
• /
• pp.133-146
• /
• 2001

In a dynamic load distribution policies, each node gathers the current system sates information before making a decision on load balancing. Load balancing policies based on this strategy can suffer from processor thrashing. In this paper, we propose a new algorithm which attempts to decrease the frequency of the processor thrashing, the algorithm is based on the integration of three components. The first, the algorithm of which determine the size of jobs be transferred. The second, negotiation protocol with obtains a mutual agreement between a sender and a receiver on the transferring job size. And the third, a symmetrically-initiated location policy. The algorithm proposed in this paper used Siman IV as simulation tool to prove the improvement of performance. I analyzed the result of simulation, and compared with related works. The mean response time shows that there are no difference with existing policy, but appear a outstanding improvement in high load. The thrashing coefficient that shows the average response time, CPU overhead and the thrashing ratio at both the receiving and sending node has been used in the analysis. A significant improvement in the average response time and the CPU overhead ratio was detected using our algorithm when an overhead occurred in the system over other algorithm. The thrashing coefficient differed in the sending node and the receiving node of the system. Using our algorithm, the thrashing coefficient at the sending node showed more improvement when there was an overhead in the system, proving to be more useful. Therefore, it can be concluded that the thrashing ratio can be reduce by properly setting the maximum and minimum value of the system’s threshold queue.