• 한국전자파학회논문지
• /
• 제8권1호
• /
• pp.83-93
• /
• 1997

본 논문은 고전압 실험실에서 시변성 전자계의 측정 및 평가에 관한 것으로 전자적 외란은 주로 전력장비의 지락고장 및 개폐조작에 의해 기인되며, 전자회로와 제어장비틀은 전자방해작용에 매우 민감하다. 주어진 전자환 경에 대한 전자방해작용의 레벨을 평가하는 것은 필수적이다. 전계는 40 Hz-2oo MHz 범위의 대역폭을 갖는 전계센서로 관측되었으며, 시변성 자계는 출력이 입사신호에 직접적으로 비례하는 루프형 센서로 측정되었다. 또한 진동성 과도전류와 차단파 임펄스전압에 의해 유도된 전자방해작용의 레벨파 전자 차폐의 외함설계에 관한 정보를 주는 사변성 전자계의 주파수 성분을 고속프리에변환으로 분석하였다.

• 전기전자학회논문지
• /
• 제21권1호
• /
• pp.81-84
• /
• 2017

본 논문에서는 대형 풍력발전시스템에서 신뢰성 및 품질에 가장 큰 영향을 주는 기계적인 부품에 있어서 증속기어를 제거함으로서 잠재적인 고장 및 전력품질 저하의 문제점을 해결하고자 한다. 제안된 방식은 회전가능한 고정자와 슬립링을 적용하고, 고정자를 회전시킴으로써 기존의 증속기를 갖는 풍력발전시스템과 유사한 발전특성을 확보하고자 한다. 또한, 제안된 방식의 동작과 성능을 확인하기 위해 PSIM 시뮬레이션 패키지를 사용하여 시뮬레이션을 수행하여 성능을 검증하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 추계학술대회 논문집
• /
• pp.124-126
• /
• 2008

Grid Connected inverter is produced current to deliver power to grid. To provide low THD current, LCL filters is effective to filter high frequency component of current output from inverter. To provide sinusoidal waveform, there are many researchers have been proposed several controllers for grid-connected inverter controllers. Synchronous Reference Frame (SRF)-based controller is the most popular methods. SRF-based controller is capable for reducing both of zero-steady state error and phase delay. But SRF based controller is contained cross-coupling components, which generate some difficulties to analyze. In this paper, SRF based controller is analyzed. By applying decoupling control, cross-coupling component is eliminated and single phase model of the system is obtained. Through this single phase model, gain controller is designed. To reduce steady state error, proportional gain is set as high as possible, but it may produce instability. To compromise between a minimum steady state error and stability, the single phase model is evaluate through Root Locus and Bode diagram. PSIM simulation is used to verify the analysis.

• Journal of Power Electronics
• /
• 제18권1호
• /
• pp.34-44
• /
• 2018

This paper presents a pulse-width adjustment (PWA) strategy for a novel bidirectional DC-DC boost converter to improve the performance of the dynamic inductor current response. This novel converter consists of three main components: a full-bridge converter (FBC), a high-frequency isolated transformer with large leakage inductance, and a three-level voltage-doubler rectifier (VDR). A number of scholars have analyzed the principles, such as the soft-switching performance and high-efficiency characteristic, of this converter based on pulse-width modulation plus phase-shift (PPS) control. It turns out that this converter is suitable for energy storage applications and exhibits good performance. However, the dynamic inductor current response processes of control variable adjustment is not analyzed in this converter. In fact, dc component may occur in the inductor current during its dynamic response process, which can influence the stability and reliability of the converter system. The dynamic responses under different operating modes of a conventional feedforward control are discussed in this paper. And a PWA strategy is proposed to enhance the dynamic inductor current response performance of the converter. This paper gives a detailed design and implementation of the PWA strategy. The proposed strategy is verified through a series of simulation and experimental results.

• Steel and Composite Structures
• /
• 제48권4호
• /
• pp.475-483
• /
• 2023

In this paper, a new energy-efficient semi-active hybrid bulk damper is developed that is cost-effective for use in structural applications. In this work, the possibility of active and semi-active component configurations combined with suitable control algorithms, especially vibration control methods, is explored. The equations of motion for a container bridge equipped with an MDOF Mass Tuned Damper (M-TMD) system are established, and the combination of excitation, adhesion, and control effects are performed by a proprietary package and commercial custom submodel software. Systematic methods for the synthesis of structural components and active systems have been used in many applications because of the main interest in designing efficient devices and high-performance structural systems. A rational strategy can be established by properly controlling the master injection frequency parameter. Simulation results show that the multiscale model approach is achieved and meets accuracy with high computational efficiency. The M-TMD system can significantly improve the overall response of constrained structures by modestly reducing the critical stress amplitude of the frame. This design can be believed to build affordable, safe, environmentally friendly, resilient, sustainable infrastructure and transportation.

• Wind and Structures
• /
• 제39권2호
• /
• pp.111-123
• /
• 2024

The atmospheric turbulence characteristics measured at a meteorological station in northwest part of the Czech Republic are presented for selected time periods in the year 2017. The terrain of this region is influenced by surface coal mining and the related industry. The datasets used in this study were measured using four ultrasonic anemometers installed on an 80 m high meteorological mast at heights of 20, 40, 60 and 80 m, respective. From the primary high-frequency datasets, time intervals in order of hours were selected and integral turbulence characteristics (ITCs), turbulence intensities and turbulence spectra were analyzed. The time intervals were selected with respect to atmospheric stability parameter, known as Obukhov number. We concentrated on the days with higher wind velocity and neutral atmospheric stratification. The wind characteristics investigated in this study include the wind speed, wind direction and its histograms, turbulence intensity, friction velocity and wind power spectra. The ITCs and spectral characteristics were compared with the theoretical models and values from the literature. The resulting ITCs showed the values for urban locations similar to those found in other studies and can be used in practical design. The computed turbulence spectra followed the shape of theoretical spectra of turbulence for both horizontal and vertical velocity components. The computed integral length scales have shown to be unsuitable for further use due to their highly scattered values.

• Smart Structures and Systems
• /
• 제25권2호
• /
• pp.155-167
• /
• 2020

This paper demonstrates a real-time hybrid substructuring (RTHS) shake table test to evaluate the seismic performance of a base isolated building. Since RTHS involves a feedback loop in the test implementation, the frequency dependent magnitude and inherent time delay of the actuator dynamics can introduce inaccuracy and instability. The paper presents a robust stability and performance analysis method for the RTHS test. The robust stability method involves casting the actuator dynamics as a multiplicative uncertainty and applying the small gain theorem to derive the sufficient conditions for robust stability and performance. The attractive feature of this robust stability and performance analysis method is that it accommodates linearized modeled or measured frequency response functions for both the physical substructure and actuator dynamics. Significant experimental research has been conducted on base isolators and dampers toward developing high fidelity numerical models. Shake table testing, where the building superstructure is tested while the isolation layer is numerically modeled, can allow for a range of isolation strategies to be examined for a single shake table experiment. Further, recent concerns in base isolation for long period, long duration earthquakes necessitate adding damping at the isolation layer, which can allow higher frequency energy to be transmitted into the superstructure and can result in damage to structural and nonstructural components that can be difficult to numerically model and accurately predict. As such, physical testing of the superstructure while numerically modeling the isolation layer may be desired. The RTHS approach has been previously proposed for base isolated buildings, however, to date it has not been conducted on a base isolated structure isolated at the ground level and where the isolation layer itself is numerically simulated. This configuration provides multiple challenges in the RTHS stability associated with higher physical substructure frequencies and a low numerical to physical mass ratio. This paper demonstrates a base isolated RTHS test and the robust stability and performance analysis necessary to ensure the stability and accuracy. The tests consist of a scaled idealized 4-story superstructure building model placed directly onto a shake table and the isolation layer simulated in MATLAB/Simulink using a dSpace real-time controller.

• 한국ITS학회 논문지
• /
• 제6권2호
• /
• pp.95-106
• /
• 2007

본 논문은 음악 정보검색에 사용되는 효과적인 템포 특징 추출방식을 제안한다. 제안된 템포 정보는 협소 밴드상의 일시적인 변조 성분에 의해 형성된다. 이러한 변조 성분은 시간 축 상의 음악 신호로부터 스펙트럼을 구한 후, 각 스펙트럼 성분에 대한 주파수 영역 분석을 통해 획득된 변조 스펙트럼으로 구성된다. 실제 구현에 있어서는 MP3 음악파일로부터 부분 디코딩에 의해 출력된 변형된 이산 코사인 변환 계수에 퓨리에 변환을 취하여 변조스펙트럼을 구하였다. 획득된 변조 스펙트럼의 진폭으로부터 고속으로 추출된 음악 템포 특징값은 다양한 음악 정보 검색에 적용되었다. 음악 무드 및 장르 분류에서는 로그 변조 주파수 계수를 적용하여 분류 성능을 개선시켰으며, 적응 변조 스펙트럼에서 유도된 비트 벡터는 오디오 핑거프린팅에 적용되어 잡음환경 하에서도 검색 성능을 크게 향상시켰다.

• Journal of Power Electronics
• /
• 제11권2호
• /
• pp.228-236
• /
• 2011

The ${\Delta}\;V_{10}$ or 10-Hz flicker index, as a common method of measurement of voltage flicker severity in power systems, requires a high computational cost and a large amount of memory. In this paper, for measuring the ${\Delta}\;V_{10}$ index, a new method based on the Adaline (adaptive linear neuron) system, the FFT (fast Fourier transform), and the PSO (particle swarm optimization) algorithm is proposed. In this method, for reducing the sampling frequency, calculations are carried out on the envelope of a power system voltage that contains a flicker component. Extracting the envelope of the voltage is implemented by the Adaline system. In addition, in order to increase the accuracy in computing the flicker components, the PSO algorithm is used for reducing the spectral leakage error in the FFT calculations. Therefore, the proposed method has a lower computational cost in FFT computation due to the use of a smaller sampling window. It also requires less memory since it uses the envelope of the power system voltage. Moreover, it shows more accuracy because the PSO algorithm is used in the determination of the flicker frequency and the corresponding amplitude. The sensitivity of the proposed method with respect to the main frequency drift is very low. The proposed algorithm is evaluated by simulations. The validity of the simulations is proven by the implementation of the algorithm with an ARM microcontroller-based digital system. Finally, its function is evaluated with real-time measurements.

• 한국항공우주학회지
• /
• 제37권1호
• /
• pp.62-68
• /
• 2009

하이브리드 로켓 연소에서 발생하는 산화제 난류 유동과 연료의 기화로 인한 분출유동 사이의 상호 간섭은 매우 복잡하고 특별한 유동 간섭을 일으킨다. 이를 연구하기 위하여 연소반응을 제외하고, 산화제의 난류 유동과 연료 벽면에서의 분출 유동을 모사한 채널 유동에 대한 LES 해석을 수행하였다. 고체추진 로켓의 연소 과정에서 관찰되는 현상과 매우 흡사하게 벽면 근처에서 특정주파수로 진동하는 유동 현상이 존재한다는 것을 확인하였고, 산화제와 분출 유동의 간섭에 기인한 유동의 진동현상은 벽면 근처의 매우 얇은 영역에서만 존재하였다. 큰 길이 스케일의 유동현상을 보여주는 압력 섭동장으로부터 채널 내 주유동이 특정 주파수 특성을 갖고 하류로 진행해 가는데, 이는 산화제 유동이 분출유동과 상호작용을 하면서 발생된 전단유동의 특성을 나타낸 것이다. 그러나 하이브리드 로켓 연소실 유동의 진동 특성은 고체 추진 로켓에서 관찰되는 유동 특성과는 달리, 진동의 강도가 벽면에서 온도 구배를 변화시켜 열전달의 향상을 발생시키기에는 충분하지 못한 것으로 보인다. 그러나 벽면 근처에서 특정 주파수 특성을 갖는 유동현상이 존재한다는 사실은 비슷한 크기의 주파수를 갖는 음향 가진과 같은 외부교란이 작용한다면 공진으로 발전할 수 있는 가능성을 의미한다.