• Journal of Broadcast Engineering
• /
• v.13 no.5
• /
• pp.744-751
• /
• 2008

In this paper, we investigate methods to enhance the perceptual quality of MP3-coded audios. Based on the high frequency reconstruction method by Liu, in the proposed method, we determine adaptively the starting point of high frequency reconstruction. We also present an improved linear estimation method. For high frequency component generation, we compare two methods. One is a replication of low-frequency components and the other is an insertion of additive white Gaussian noise signals. Through subjective tests, we shall show that the proposed method can improve the perceptual quality of MP3-coded audio.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.4
• /
• pp.369-378
• /
• 1992

This paper proposes a utility parallel processing inverter system, which consists of a voltage source PWM inverter, isolation transformer and a reactor linking the inverter to utility line. This system realizes following functions : (1) voltage phase frequency and amplitude synchronization between inverter and utility line at stand-alone mode. (2) current phase synchronization between inverter and load at parallel mode. Therefore, despite sudden increase in load current over setting point at stand-alone mode, inverter system can be transferred into parallel mode immediately without transient current. Furthermore, high frequency(18KHz) PWM control and sinusoidal filtering improve the inverter output waveform by eliminating high order harmonic components as well as low order. As a switching device, IGBT is used for high frequency switching and large current capacity.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.4
• /
• pp.29-35
• /
• 2014

The purpose of high frequency transformer in the inverter is to reduce the voltage and current stresses of switch components when it operates at the large conversion ratio. But the loss of transformer is the major contributor in the efficiency of inverter. This paper presents the method of core design to minimize the loss of transformer. The total loss of transformer is minimized by adjusting the effective cross-sectional areas of core. The component ratio of losses are compared by using the finite-element analysis.

• Journal of the Korean Society of Safety
• /
• v.6 no.2
• /
• pp.21-30
• /
• 1991

In this paper, we study effect of waveness at the optical surface roughness measurement. In generally, waveness components cause errors in calculation of the roughness value of metal surface. We study about surface roughness signals In the frequency domain for separate two signal component of real roughness and waveness by digital signal processing methods. Thereafter, determine low and high Component of frequency spectrum. By this separating frequency value we design liner low and high pass filter which cutoff frequency is 1 Hz. After this process, converted each filtered spectrum by inverse discrete fourier transformation to time domain waveness and real roughness signals We calculate surface roughness value from filtered roughness signals. For evaluate this method, we use five specimens roughness signal which obtained from optical surface roughness measuring system in 3mm/s moving speed with 0.1 mm laser beam spot size As a result, we obtain more linerized roughness value than that of unfiltered roughness signals.

• Journal of Sensor Science and Technology
• /
• v.24 no.4
• /
• pp.247-251
• /
• 2015

In this study, electroglottographic spectral tilt (EST) was investigated for characterization of vocal cords vibration. EST was analyzed from the power spectrum of electroglottographic signals by dividing frequency analysis range as full range (0~4 octave), low range (0~2 octave), and high range (2~4 octave). EST of all ranges in female were greater than those in male. In female and male groups, EST of high range was higher than that of low range. This result suggests that EST has at least two components and dividing frequency range in analysis of EST is effective for investigating characteristics of vocal cords vibration.

• Journal of Information Processing Systems
• /
• v.19 no.3
• /
• pp.275-288
• /
• 2023

Many image edge details are easily lost in the image denoising process, and the smooth image regions are prone to produce jagged. In this paper, we propose a wavelet-based image global k- singular value decomposition variational method to remove image noise. A layer of wavelet decomposition is applied to the noisy image first. Then, the image global k-singular value decomposition (IGK-SVD) method is used to remove the random noise of low-frequency components. Furthermore, a constructed variational denoising method (VDM) removes the random noise in the high-frequency component. Finally, the denoised image is obtained by wavelet reconstruction. The experimental results show that the proposed method's peak signal-to-noise ratio (PSNR) value is higher than other methods, and its structural similarity (SSIM) value is closer to one, indicating that the proposed method can effectively suppress image noise while retaining more image edge details. The denoised image has better denoising effects.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.5
• /
• pp.513-520
• /
• 2003

In this paper, a novel design concept of frequency doubler using feedforward technique and DGS microstrip line is proposed. The feedforward loop plays a role of fundamental frequency suppression and DGS microstrip line suppresses over the 3rd order harmonic components. By using this new concept, the high suppression for the undesired signals could be achieved easily. The proposed technique is experimentally demonstrated in 1.87 GHz-to-3.74 GHz frequency doubler. The output power of -3 dBm at the frequency of 3.74 GHz(2f$\_$0/) is measured with 42.9 dB suppression of the fundamental frequency signal(f$\_$0/), 20.2 dB suppression of the 3rd harmonic signal(3f$\_$0/) and B9.7 dB suppression of the 4th harmonic signal(4f$\_$0/). The conversion loss of -2.34 dB ∼ -5.8 dB at the bandwidth of 100 MHz, the phase noise of -97.51 dB/Hz(＠10 kHz) were measured.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2002.11a
• /
• pp.165-168
• /
• 2002

Accurate circuit simulation models for embedded RF passive components in LTCC provide a way to efficiently design high performance RF modules. Particularly, consideration of unavoidable parasitic components is required certainly. In this study, the parasitic components which is appeared from 3-D structure is considered.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.48 no.8
• /
• pp.448-454
• /
• 1999

This paper describes a new dc-ac inverter system which for achieving sinusoidal ac waveform makes use of parallel loaded high frequency resonant inverter consisting of full bridge. Each one of the pair of switches in the inverter is driven to synchronous output frequency and the other is driven to PWM signal with resonant frequency proportional to magnitude of sine wave. A forced discontinuous conduction mode is used to realize the quasi-sinusoidal pulse in each switching period. Therefore the inverter generates sinusoidal modulated output voltage including carrier frequency that is resonant frequency. Carrier frequency components of modulated output voltage is filtered by low pass filter. Since current through switches is always zero at its turn-on in the proposed inverter, low stress and low switching loss is achieved. Operating characteristics of the proposed system is analyzed in per unit system using computer simulation. The output voltage of if includes low harmonics and it is almost close to sine wave. Also, the theoretical analysis is proved through the experimental test.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.5
• /
• pp.2741-2761
• /
• 2017

With the purpose of copyright protection for digital video, a novel H.264/AVC watermarking algorithm based on JND model is proposed. Firstly, according to the characteristics of human visual system, a new and more accurate JND model is proposed to determine watermark embedding strength by considering the luminance masking, contrast masking and spatial frequency sensitivity function. Secondly, a new embedding strategy for H.264/AVC watermarking is proposed based on an analysis on the drift error of energy distribution. We argue that more robustness can be achieved if watermarks are embedded in middle and high components of $4{\times}4$ integer DCT since these components are more stable than dc and low components when drift error occurs. Finally, according to different characteristics of middle and high components, the watermarks are embedded using different algorithms, respectively. Experimental results demonstrate that the proposed watermarking algorithm not only meets the imperceptibility and robustness requirements, but also has a high embedding capacity.