• 지구물리와물리탐사
• /
• 제11권2호
• /
• pp.116-126
• /
• 2008

가스 하이드레이트의 탐사에서 탄성파 진폭과 주파수 특성은 가스 하이드레이트의 부존 여부에 대한 매우 중요한 판단 근거이다. 본 연구에서 탄성파 진폭특성은 탄성파 수치모델링 기법을 이용하여 음원 주파수 및 산란체의 크기에 따른 변화 양상을 파악하고자 하였다. 일반적으로 진폭에 큰 영향을 미치는 산란은 음원의 주파수 제곱에 비례하고 산란 이상체의 체적에 비례한다. 음원의 주파수가 높아질수록 가스 하이드레이트 지층에서의 산란이 심하여 BSR이 잘 나타나지 않는 반면 음원의 주파수가 낮아질수록 가스 하이드레이트 지층의 진폭공백대 특성이 잘 나타나고 또한 하부의 BSR이 보다 뚜렷히 보이나 해상도가 낮아지게 된다. 가스 하이드레이트 지층 하부의 Free-Gas층을 통과한 반사파는 고주파수 성분이 감쇠되어 저주파수 성분이 우세해지고, Free-Gas로 인하여 나타나는 BSR의 진폭은 극성역전현상이 발생되며 이것은 가스 하이드레이트 지층의 존재와 분포를 판단하는 중요한 인자가 된다. 탄성파 주파수 특성 분석은 Wavelet Transform을 이용하여 시간에 따른 탄성파동의 주파수 변화를 관찰하는 방법을 사용하였다. 탄성파 모형 실험 자료에 대하여 적용한 결과 Free-Gas층에 대비되는 공기층을 통과하여 반사된 탄성파의 주파수는 고주파수 성분이 상당히 감쇠되었음을 관찰할 수 있었다.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.537-540
• /
• 2008

This paper reviews the operation standards and manuals of earthquake monitoring system for Gyungbu high speed railroad. The domestic earthquake monitoring system detects the acceleration data at the locations of lower part of pier and deck of viaducts and bridges, not like foreign system to do the surface ground accelerations. For the purpose of evaluating the behaviors of the domestic earthquake monitoring system, measured acceleration data on the Odaesan earthquake at Iwon viaduct were analysed. The values of maximum acceleration level of the viaduct were increased from 0.0089g(EW component) of the lower part of pier to 0.014g(EW component) on the deck of the viaduct. And also the predominant periods and frequencies were analysed by the frequency domain analysis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1106-1107
• /
• 2007

Planar magnetic based design technologies have been widely applied to power design for better cooling and ease of fabrication. The planar transformer and the planar inductor have a low profile characteristics compare to the conventional transformer which would be more cubical in volume. High frequency operation of magnetic components is a main key to achieve high power density of the power module. However, at a high frequency, the skin effect and the proximity effect have to be considered very significantly in magnetic design and also the parasitics in the converter cannot be ignored. This paper deals with the design and the experiment of planar integrated magnetic component. The optimal design for planar magnetics is summarized.

• 한국정보전자통신기술학회논문지
• /
• 제12권4호
• /
• pp.349-358
• /
• 2019

본 논문에서는 회전체의 특징 파라미터들을 추출하기 위한 센서의 신호들을 수집하는 방법을 연구하고자 한다. 이를 위해, 모형 시험을 수행하기 위한 진동 테스트 리그를 개발하여 정상적으로 운전하에서의 신호특성을 분석하였다. 다른 진동 요소들로부터 주기적인 충격에 의해 발생되는 진동 성분을 추출하기 위하여 포락 신호처리(Envelope FFT Analysis) 기법을 사용하였다. 회전속도에 따른 신호분석과 더불어 회전체의 저주파수 특성을 잘 나타내는 속도센서 및 진동 테스트 리그의 부하변화에 따른 신호를 분석하였다. 그 결과, 베어링 하우징에서 측정되는 가속도 신호는 진폭이 작으며 조화 성분과 모터의 회전주파수 성분만이 발생함을 확인하였다. 즉, 회전수가 높아짐에 따라 가속도의 진폭이 높아짐을 확인할 수 있었다. 회전속도가 증가하면 원 데이터의 형상의 차이가 있는 것을 확인할 수 있었고, 가속도 FFT 그래프와 비교하였을 경우 저 주파수에서 노이즈에 강하며 해당 회전 주파수 성분을 뚜렷하게 나타내었다. 또한 부하를 변화시켜도 주요 회전 주파수 성분이 증가하지 않음을 알 수 있었다.

• 전자공학회논문지B
• /
• 제33B권12호
• /
• pp.113-121
• /
• 1996

This paper presents a 37.5kVA (125kVp, 300mA) high frequency inverter type power supply for diagonostic X-ray generator with two HFHV (high-frequency high-voltage) isolating transformers. The output regulations, X-ray tuve voltage and tube current, are obtained by two high frequency inverters with the each other feedback PI controller and operating time switch for selecting shooting time and synchronizing two inverters. The operating modes and design consideration of the proposed power supply are given. Issues in the design of two HFHV isolating transformersfors high volage genrating and filament heating are discussed. Experimental results are presented to verify the performance of the designed power supply for varying load conditions. The proposed apparatus has several advnatages, e.g., the fast rising time of tube voltae, accuracy and reduced component size etc.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제2C권5호
• /
• pp.273-278
• /
• 2002

Even though the modulating signal frequency of the light is too high to detect directly, the signal can be extracted by frequency conversion at the same time as the detection by means of the non-linearity of the APD. An analysis is presented for super-high-speed optical demodulation by an APD with electronic mixing. A normalized gain is defined to evaluate the performance of the frequency conversion demodulation. The nonlinear effect of the internal capacitance was included in the small signal circuit analysis. We showed theoretically and experimentally that the normalized gain is dependent on the down converted difference frequency component. In the experiment, the down converted different frequency outputs became larger than the directly detected original signal for the applied local signal of 20㏈m.

• Journal of Power Electronics
• /
• 제16권4호
• /
• pp.1513-1525
• /
• 2016

Rapid and accurate phase synchronization is critical for the reliable control of grid-tied inverters. However, the commonly used software phase-locked loop methods do not always satisfy the need for high-speed and accurate phase synchronization under severe grid imbalance conditions. To address this problem, this study develops a novel open-loop phase locking scheme based on a synchronous reference frame. The proposed scheme is characterized by remarkable response speed, high accuracy, and easy implementation. It comprises three functional cascaded blocks: fast orthogonal signal generation block, fast fundamental-frequency positive sequence component construction block, and fast phase calculation block. The developed virtual orthogonal signal generation method in the first block, which is characterized by noise immunity and high accuracy, can effectively avoid approximation errors and noise amplification in a wide range of sampling frequencies. In the second block, which is the foundation for achieving fast phase synchronization within 3 ms, the fundamental-frequency positive sequence components of unsymmetrical grid voltages can be achieved with the developed orthogonal signal construction strategy and the symmetrical component method. The real-time grid phase can be consequently obtained in the third block, which is free from self-tuning closed-loop control and thus improves the dynamic performance of the proposed scheme. The proposed scheme is adaptive to severe unsymmetrical grid voltages with sudden changes in magnitude, phase, and/or frequency. Moreover, this scheme is able to eliminate phase errors induced by harmonics and random noise. The validity and utility of the proposed scheme are verified by the experimental results.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.1127-1130
• /
• 1999

In this paper, using one method of Additive Synthesis, Analysis-by-synthesis/Overlap-Add (ABS/OLA) method, analysis and synthesis of musical tones is processed. But peak detection of frequency domain is processed by proposed method considering the view of acoustics. It is that that harmonics frequency is times of main frequency. Using this fact, peak detection of frequency domain is useful for detection of tonal component identified musical note. It is possible to realize high-quality lour bit rate audio.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.543-546
• /
• 2004

Bias and frequency-dependent impedance is a technique for the investigation of complex conductivity. At low frequency, complex impedance is dominated by resistive component, and at high frequency by capacitive component. We are going to present the results of the bias and frequency-dependent complex impedance in the device structure of $ITO/Alq_3/Al$ in the temperature range between 10K and 300k. And we will show to change radius of Cole-Cole plot. It will be decrease resistance by temperature. Also equivalent electrical circuit and dielectric relaxation can be accomplished by using the complex impedance analysis.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 디스플레이 광소자분야
• /
• pp.115-118
• /
• 2003

Complex impedances with frequency and voltage variation were analyzed in $ITO/Alq_{3}/Al$(100nm)/Al device structure. At low frequency, complex impedance is mostly expressed by resistive component, and at the high frequency by capacitive component. Also, we have evaluated resistance, capacitance and permittivity.