• 한국경영과학회지
• /
• 제21권1호
• /
• pp.51-69
• /
• 1996

We consider a consumer self-selection model in which a regulated firm faces two market segments with differing valuation of quality of telecommunication services and examine some economic implications from the behaviors of the firm. In the context of a regulated monopolist, even though the results depend on the degree of privatization, the firm could lower the quality of the low-end model and reduce the price of the high-end in order to alleviate cannibalization. This justifies the provision of universal service policy in the telecommunications market. Based on this self-selection model, we also analyze an extended model of product introduction and show that the monopolist will introduce new product with the same introduction time of social planner. However, when we consider competition among firms, the market equilibrium may not guarantee the efficient time of product introduction.

• Journal of Communications and Networks
• /
• 제13권4호
• /
• pp.377-384
• /
• 2011

Cooperative beamforming has previously been proven to be an efficient way to improve the cooperative diversity. This method generally requires all relay nodes to participate in beamforming, which can be seen as "all participate" cooperative beamforming. However, not all relay nodes have constructive impacts on the end-to-end bit error rate (BER) performance. Based on this observation, we propose a new cooperative scheme which only selects those "appropriate" relay nodes to perform cooperative beamforming. Such relay nodes can be simply determined with mean channel gains. Therefore, the selection complexity is significantly reduced as global instantaneous channel state information is not required. This scheme guarantees that energy is only allocated to the "appropriate" relay nodes, and hence provides superior diversity. We also prove that power allocation among source and selected relay nodes is a convex problem, and can be resolved with lower computational complexity. Simulation results demonstrate that our scheme achieves an essential improvement in terms of BER performance for both optimal and limited feedback scenarios, as well as high energy-efficiency for the energy-constrained networks.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2006년도 정기학술발표대회 논문집
• /
• pp.602-605
• /
• 2006

최근, 유비쿼터스 컴퓨팅은 새로운 지식정보국가 건설과 자국의 정보 산업 경쟁력 강화를 위한 핵심 패러다임이라는 인식 하에 미국, 유럽, 일본의 정부 및 기업, 연구소들이 관련 기술에 대한 개발에 총력을 다하고 있다. 우리나라의 경우도 정부의 차세대 성장동력 산업의 주요 부분으로 유비쿼터스 기술을 제시하고 있으며, 국내 정부기관, 기업 또한 유비쿼터스 조기실현을 위한 노력을 경주하고 있는 실정이다. 따라서, 본 논문은 차세대 첨단 정보통신 기술로 부각되고 있는 유비쿼터스 환경을 건설분야에 효율적으로 적용하기 위한 기반 연구로써, 유비쿼터스환경하의 건설 프로세스의 변화양상과 단계별 정보 서비스 구현을 위한 필요한 요소기술들에 대하여 논하고자 한다.

• 정보통신설비학회논문지
• /
• 제2권3호
• /
• pp.48-60
• /
• 2003

With the rapid successful deployment of WLANs worldwide in numerous hotspots for high data rate, wireless access for data services has created the need to integrate the Cellular Networks with WLAN Networks. The integrated wireless environment will provide the end user a much better service experience along with a single subscription and a single bill. In this paper we focus on inter-working approaches, which combine WLANs and Cellular Networks into an integrated wireless environment capable of ubiquitous access to data services and very high data rates in hotspots areas. We first list the key requirements which are currently being standardized within the 30PP for integration with WLANs networks. We discuss two inter-working architectures namely loosely coupled and tightly coupled This paper will detail the loosely coupled inter-working approach while briefly discussing the tightly coupled inter-working. Finally, we will conclude that the loosely coupled approach is evolutionary and less intrusive than the tightly coupled approach.

• Journal of information and communication convergence engineering
• /
• 제10권2호
• /
• pp.103-107
• /
• 2012

An end-launched adapter combining a coaxial loop within a rectangular waveguide has been analyzed and designed. The accurate electromagnetic modeling of input impedance for the adapter design has been developed using a modal analysis method. Also, design parameters to improve the end-launched adapter have been investigated. Numerical and experimental results of the proposed model have been compared with the results of previous works, and verified by an electromagnetic simulator of High Frequency Structure Simulator (HFSS). The input voltage standing wave ratios (VSWRs) are smaller than 2 over the wide frequency band from 7.5 GHz to 10.5 GHz.

• Journal of electromagnetic engineering and science
• /
• 제4권3호
• /
• pp.128-136
• /
• 2004

In this paper,. with the aim of achieving the expected performance improvement for a polarization diversity system, we analyzed two-branch polarization diversity at the receiving end of a mobile link which a transmitter emits circularly polarized wave. In this analysis, to calculate the correlation coefficient considered by XPD(cross polarization discrimination) between the two received signals, a simple theoretical model of circular polarization diversity is adopted. From the analysis results, it is clearly seen that the correlation coefficient of circular polarization diversity evaluated by the XPD is less than that of conventional linear polarization diversity. And also, we designed and implemented a circular polarization diversity system with micro-strip antenna. By using the circular polarization diversity system, we analyzed the measured data in indoor NLOS(Non-Line-Of-Sight) environments. From this analysis results, it is also clearly seen that the diversity effect of circular polarization diversity system shows better performance compared to the conventional linear diversity system by about 3 dB high.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.821-824
• /
• 1993

This paper deals with a $3{\phi}$ rectifier unit for telecommunication system. The rectifier unit is developed to Cope with the step-up of the AC input voltatage from 220V to 380V. By using a buck-type converter in the front-end, it keeps the input power factor high and reduces the voltage ripple in the dc output. It also has a very wide voltage regulation range, which lets the unit be applied for both the 220V and 380V input system. The study includes the power conversion scheme, control strategy, snubber circuit and finally, experimental results.

• Journal of Communications and Networks
• /
• 제17권1호
• /
• pp.58-66
• /
• 2015

Aeronautical communication networks (ACN) is an emerging concept in which aeronautical stations (AS) are considered as a part of multi-tier network for the future wireless communication system. An AS could be a commercial plane, helicopter, or any other low orbit station, i.e., Unmanned air vehicle, high altitude platform. The goal of ACN is to provide high throughput and cost effective communication network for aeronautical applications (i.e., Air traffic control (ATC), air traffic management (ATM) communications, and commercial in-flight Internet activities), and terrestrial networks by using aeronautical platforms as a backbone. In this paper, we investigate the issues about connectivity, throughput, and delay in ACN. First, topology of ACN is presented as a simple mobile ad hoc network and connectivity analysis is provided. Then, by using information obtained from connectivity analysis, we investigate two communication models, i.e., single-hop and two-hop, in which each source AS is communicating with its destination AS with or without the help of intermediate relay AS, respectively. In our throughput analysis, we use the method of finding the maximum number of concurrent successful transmissions to derive ACN throughput upper bounds for the two communication models. We conclude that the two-hop model achieves greater throughput scaling than the single-hop model for ACN and multi-hop models cannot achieve better throughput scaling than two-hop model. Furthermore, since delay issue is more salient in two-hop communication, we characterize the delay performance and derive the closed-form average end-to-end delay for the two-hop model. Finally, computer simulations are performed and it is shown that ACN is robust in terms of throughput and delay performances.

• 대한전자공학회논문지TC
• /
• 제40권8호
• /
• pp.318-330
• /
• 2003

The advantages of "VPN over Internet" are cost-effectiveness and flexibility However, the disadvantages are the lack of sufficient QoS mechanism and transmission capacity for high bandwidth service. Given this increasing demand for high bandwidth Internet and QoS assurances in "PN over Internet", IP/GMPLS based control plane combined with a high bandwidth capacity of DWDM optical network is seen as a very favorable approach for the realization of future "OVPN over IP/GMPLS over DWDM" Within OVPN for providing QoS guaranteed multimedia service over the NGOI(Next Generation Optical Internet) based on the "IP/GMPLS over DWDM" concept, differentiated QoS framework is one of the key issues to implement OVPN over DWDM-based NGOI. Keeping in mind that IETF(Internet Engineering Task Force) and ITU-T(International Telecommunication Union) are standardizing IP/GMPLS over DWDM protocol framework as a solution for the NGOI, in this paper, we suggest Optical-LSP establishment and QoS maintenance scheme based on DOQS(Differentiated Optical QoS Service) classes, which are the key issue of DOQS protocol framework for assuring end-to-end QoS in "OVPN over IP/GMPLS over DWDM".

• 전자공학회논문지
• /
• 제50권9호
• /
• pp.107-115
• /
• 2013

스마트 가전은 멀티미디어, 통신 기능을 탑재하여 더욱 쉽고 편리한 복합 기능을 제공한다. 그러나 8bit 이하의 컨트롤러를 탑재한 저사양 생활가전은 멀티미디어, 통신 기능을 탑재하기에 성능의 제약이 따른다. 만약 저사양 생활가전에 적합한 통신방법과 복합 기능을 구현할 수 있는 방법을 제공한다면 저사양 생활가전도 스마트 가전과 같은 효과를 낼 수 있을 것이다. 생활가전의 8bit 컨트롤러는 UART를 내장하고 있으므로 와이파이, 블루투스 등의 모듈을 UART로 연결하면 저사양 생활가전을 스마트 장치에 접속할 수 있게 된다. 스마트 장치는 다양한 통신 방식을 지원하기 때문에 생활가전의 통신 방식에 상관없이 모두 접속이 가능하다. 스마트 가전의 복합 기능들은 복잡해 보이지만 실제로는 저사양 생활가전에서도 제공하는 기본 기능들을 차례로 수행하도록 만든 것임을 알 수 있다. 기본 기능은 그 종류가 많지 않으며 이를 조합하여 순서대로 수행 할 수 있도록 제어 프로그램을 확장한다면 저사양 생활가전도 복합 기능을 보유할 수 있게 된다. 단지 이를 위해 버튼, 표시장치 등의 하드웨어가 추가되어야 하기 때문에 지금까지 복합기능이 제공되지 못했던 것이다. 기본 기능에 명령 코드를 부여한 마이크로 명령을 나열하면 쉽게 복합 기능을 구현하는 매크로를 만들 수 있으며 스마트 장치의 앱으로 이를 수행하면 추가적인 하드웨어가 필요 없게 된다. 생활가전은 생성된 매크로의 마이크로명령을 순차적으로 실행하기만 하면 된다. 이와 같이 저사양 생활가전을 스마트 장치에 접속하면 에볼루션 키트를 장착한 것처럼 스마트 가전으로 업그레이드되는 효과를 얻을 수 있다.