• The Korean Journal of Nuclear Medicine Technology
• /
• v.13 no.1
• /
• pp.93-97
• /
• 2009

Purpose: Recognize circulation work system and fixing work system's merits and demerits that is enforced in operation of PET/CT center in sudden increase recently. Wish to estimate connectivity degree of individual exposure dose and PET/CT working that is managed periodically through this and look for operation efficiency of PET/CT center. Materials and Methods: (1) Find interrelationship of length of service to be individual exposure dose and PET/CT through TLD interpretation. Specially, evaluate on the basis of data of 2.5 years until 2 quarters 2006~2008 year that show patient increase rapidly the latest. (2) Recognize what countermeasure is evaluating problems happened at circulation work system and fixing work system. Results: Patient examination's number was 14,674 items until 2 quarters 2006~2008 year, and the $^{18}F$-FDG average injection amount was 461.5 MBq. 2 people of 10 radiotechnologist did fixing work PET area and GAMMA area each, and 8 people did circulation work of 3 times for 2.5 years. Average exposure dose that PET area and Gamma area's circulation men in service receive was 1.32 mSv, and PET area men in services came out average 0.825 mSv high than Gamma area men in services. Nurse's exposure dose is 0.28 mSv, and next 2 reason is conjectured. One is contact with patient that medicate $^{18}F$-FDG injection, and another is consultation about patient's next time schedule after examination end. Although exposure dose's amount is not much, is expected to consider continuation work possibility by exposure dose in case is a nurse with pregnancy possibility. Also, $^{131}I$-isotope therapy area's radiotechnologist that use capsule appeared by 0.12 mSv and a nuclear medicine doctor appeared by exposure dose that is less of 0.11 mSv. Conclusions: In case do PET/CT center circulation work after a long time, connoted danger that most men in service is consecutiveness deficiency of business and individual exposure dose increase at early 1 month. Specially, way for individual exposure dose's decrease should be considered. Also, need to evaluate abhorrent work form for efficient work system introduction, and enforce circulation and fixing work suggestion suitable shift working. Finally, must make normalized business guide and so on to prevent circulation work people's business efficiency decline.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.13 no.1
• /
• pp.112-115
• /
• 2009

Purpose: The test had been applied for outpatient by end of 2006, however, it has been included in the medical examination since January 2007, as demand and interests have been gradually increasing in the thyroid gland disease and cancer. thus, we would necessarily evaluate usefulness of the test by comparing the number of patients who are diagnosed as "benignancy" by the medical test with the number of outpatient who attend and are diagnosed as autoimmune thyroid disease among the benign patient, in samsung medical center for a certain period. Materials and Methods: Based on the result for Anti-TPO Antibody test by RIA for the 12,937 patients in samsung medical center from October 2007 to March 2008, for six months, benignancy rate classified by sex and age is measured statistically and number of the patients who are diagnosed as autoimmune thyroid disease are kept tracked on. Results: According to the analysis of the Anti-TPO antibody test 1,135 of 12,937, which is 8.77% are benign and 218 treated patient of them, which is 19.2%, were diagnosed as autoimmune thyroid disease. Conclusions: Based on the statistics, usefulness of the test seem to have co relationship with derivation of autoimmune thyroid disease. this is 19.2% of probability relatively high. this figure, however, does not have strong relationship with specialty of the disease. Thus screening test seems to have somewhat effectiveness, considering other experiments and their margin.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.5
• /
• pp.59-67
• /
• 2016

In landscape design by public institutions, although the costs and species of landscape trees stipulated by the Korean Public Procurement Service(PPS) are generally adhered to, the PPS regulations about planting trees with well-developed rootlets are almost entirely neglected. This study aimed to evaluate the performance of buried container modules, which are a new technology and product in landscape production that is able to reduce the defect rate while complying with regulations. To this end, this study measured rootlet density, rootlet development length, rootlet survival rate on excavation, and impairments of tree growth for 3 months after root pruning, and compared these variables for the container modules with those for trees that underwent root pruning in bare ground, and those that were cultivated in a container above ground. The results were as follows: First, the rootlet density was 88% for the trees in container modules, which was very high. Trees that underwent standard root pruning in bare ground had a somewhat lower density of 64%. Meanwhile, the trees that were cultivated in pots above ground died, invalidating measurement. Second, in terms of rootlet development and rootlet survival rate, the trees in container modules showed a mean length of 10.4cm, and 100% survival rate, indicating that there was no rootlet damage caused by excavation. For the trees that only underwent root pruning in bare ground, the mean length was 25.6cm and the rootlet survival rate was only half that of the trees in container modules, at 56%, demonstrating considerable damage. Rootlet development did not occur at all in the trees grown in pots. Third, the trees in container modules and those that underwent root pruning in bare ground did not show any deaths during the root pruning process, or any impairments such as stunted leaf growth. Conversely, the trees grown in pots nearly all died, and severe impairments of tree growth were observed. As shown by the results above, when we evaluated the performance of buried container modules, they showed the most outstanding performance of the three models tested in this study. The container modules prevent defects by stimulating early rooting in environments that with poor conditions for growth, or in trees that are not suited to the summer environment Therefore, it is expected that they would be an optimal means by which to enable compliance with rules such as the regulation presented by the PPS.

• Korean Journal of Food Science and Technology
• /
• v.35 no.6
• /
• pp.1079-1085
• /
• 2003

Modified atmosphere packaging was applied to oyster mushrooms (Pleurotus ostreatus) to study the effect of storage temperatures and packaging materialso. Whole mushrooms (200g) were package with polyethylene film $(PE,\;60{\mu}m\;thickness)$, ethylene vinyl acetate (EVA), or ceramic film (containing 5% zeolite) and stored at 0, 5, 10 and $20^{\circ}C$. Weight loss, color, firmness, gas composition $(O_2,\;CO_2)$ inside the film package and ethanol content in the tissue of MA packaged mushrooms were examined. Mushroom that were packed unwrapped in a conventional hardboard box (2 kg) lost marketability at a very early stage of storage due to weight loss, shrinkage, browning, and spore formation. During storage, film packaging prevented or retarded the deterioration of the mushrooms in the aspects of appearance, texture, and discoloration. Firmness slightly decreased with storage time. Total color difference was much higher in the control than in the film-packaged mushroom and rapidly increased at the early of storage. Correlation analysis showed a high correlation between total color difference and b values. These results were characterized by the reduced respiration rate resulting from elevated carbon dioxide and reduced oxygen levels in the package. At all storage temperatures, ethanol content in the tissue increased slightly at the early part of storage and rose considerably towards the end of the storage period. Ethanol content in the oyster mushrooms was higher in the stipe than in pileus tissues. The shelf life of the oyster mushrooms was about $8{\sim}11$ days at $0^{\circ}C$, about $4{\sim}6$ day at $5^{\circ}C$, about $2{\sim}3$ days at $10^{\circ}C$, and about $1{\sim}2$ days at $20^{\circ}C$.

• Journal of the Korean Wood Science and Technology
• /
• v.2 no.2
• /
• pp.22-24
• /
• 1974

1. Object and importance of the research. The exports of plywood are increasing annually and it has ranked first in the world market because of the high quality product developed and manufactured using modern techniques. However, it is known that the exports of the other wood products, except plywood, is inactive because of their low quality. Accordingly, to increase the exports of various wood products investigations were carried out on kiln drying techniques to improve the quality of the wood. 2. The details and scope of the research Wet wood should be kiln dried before use to prevent various drying defects such as distortion, shrinkage etc, which would develop after processing, and also wet wood is not suitable for cutting, gluing and finishing. Therefore, the kiln drying properties of lumber from such species as Persimmon, Oak, Ramin and Meranti which are used in large quantity for manufacturing exporting wood products have been studied. Also the real state of kiln drying industry in Korea was investigated. 3. Results and proposal for practical use of the research 3. 1 Results of the research 3.1.1 The end checks and the time for drying from intial moisture content of about 40 percent to 5 percent moisture content in ovendry were investigated as Table 1. 3.1.2 The kiln dried results, for 30mm stock, which are presented by using kiln schedule Table 2 are as Table 3. 3.1.3 The kiln schedule for Persimmon which has a normal drying properties is given in Table 4. However, the persimmon which has easy checking properties should be air dried under a relative humidity of above 85% until reaching about 25 percent moisture content. 3.1.4 The kiln schedules for ramin, meranti and oak are given respectively as follows. Ramin kiln schedule ............ Table 5 and Table 6 Meranti kiln schedule ............ Table 7 Oak kiln schedule ............ Table 8 3.2 Proposal for practical use of the research Firms using the above species should be informed the results of the research so they can be used to preventing drying defects and shortening drying time.

• Horticultural Science & Technology
• /
• v.32 no.5
• /
• pp.655-665
• /
• 2014

The effect of modified atmosphere packaging (MAP) on kohlrabi (Brassica olerace L. gongulodes group)'s quality and antioxidant molecule during storage was examined to determine the optimal film package for maintaining freshness. To extend shelf life, MAP was tested using PE $50{\mu}m$ and oriented polypropylene (OPP) films with oxygen transmission rate (OTR) at 3,000, 10,000, $15,000mL/m^2/day/atm$. The OPP film packaging with modified oxygen transmission rate showed a delay in a weight loss and extended storage period. The package with OTR 3000 attained the desired gas composition of $O_2$ 3.2-6.7 kPa and $CO_2$ 13.1-19.8 kPa, in storage at room temperature. Kohlrabi stored in this package showed the lowest weight loss and the highest visual quality. Deterioration and off-odor were developed more rapidly in PE $50{\mu}m$ towards the end of the storage at room temperature. However, there are no differences among OTR films in visual quality and off-odor until 60 days at cold storage. Vitamin C content of kohlrabi was reduced rapidly in OTR 15000 with high transmission rate and showed less loss in PE $50{\mu}m$ and OTR 3000 in both room temperatures and cold storage. Results revealed that an OPP film with OTR 3000 extended the shelf life of kohlrabi in storage with maintained quality and vitamin C.

• Journal of radiological science and technology
• /
• v.35 no.2
• /
• pp.157-164
• /
• 2012

The purpose of this study is to analyze the dose distribution when wedge filter is used in the various tissue electron density materials. The dose distribution was assessed that the enhanced dynamic wedge filter and physical wedge filter were used in the solid water phantom, cork phantom, and air cavity. The film dosimetry was suitable simple to measure 2D dose distribution. Therefore, the radiochromic films (Gafchromic EBT2, ISP, NJ, USA) were selected to measure and to analyze the dose distributions. A linear accelerator using 6 MV photon were irradiated to field size of $10{\times}10cm^2$ with 400 MUs. The dose distributions of EBT2 films were analyzed the in-field area and penumbra regions by using dose analysis program. In the dose distributions of wedge field, the dose from a physical wedge was higher than that from a dynamic wedge at the same electron density materials. A dose distributions of wedge type in the solid water phantom and the cork phantom were in agreements with 2%. However, the dose distribution in air cavity showed the large difference with those in the solid water phantom or cork phantom dose distributions. Dose distribution of wedge field in air cavity was not shown the wedge effect. The penumbra width, out of the field of thick and thin, was observed larger from 1 cm to 2 cm at the thick end. The penumbra of physical wedge filter was much larger average 6% than the dynamic wedge filter. If the physical wedge filter is used, the dose was increased to effect the scatter that interacted with photon and physical wedge. In the case of difference in electron like the soft tissue, lung, and air, the transmission, absorption, and scattering were changed in the medium at high energy photon. Therefore, the treatment at the difference electron density should be inhomogeneity correction in treatment planning system.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.1 s.129
• /
• pp.87-96
• /
• 2005

This study was carried out to evaluate the shear bond strength and adhesive bond durability of structural glued laminated timber (glulam) manufactured with mixed species lumber of Korean red pine, Korean pine and Japanese larch, using resorcinol adhesive and water-based polymeric-isocyanate adhesive (WPI). Each board used as a glulam lamina was graded by visual inspection. The visual lumber grade of the all species was very low due to the large size and number of knots and the steep slope of grain. In view of the results, appropriate pruning, sawing and drying processes might be needed to produce high grade lamina lumber with small knot size and drying defect free. Shear bond strength of every tested glulam specimen ranged between 7.9 and $9.9N/mm^2$, and much higher than the Korean Standard (KS) for glulam shear bond strength, $7.1N/mm^2$. There was not much shear bond strength difference between wood/resorcinol and wood/WPI. The resorcinol adhesive bond durability exceeded KS requirements. However, delamination on the end-grain surfaces of WPI glulam submerged in both room temperature and boiling water severely occurred, and its durability did not meet KS requirements. Further investigations may be required, and special care should be taken, to ensure long service life of WPI glulam used for exterior application. Results of this study are expected to be useful for improvement of mechanical properties and structural performance of mixed species glulam.

• The Journal of Society for e-Business Studies
• /
• v.26 no.3
• /
• pp.33-53
• /
• 2021

In the crossroads of social change caused by the spread of the Fourth Industrial Revolution and the prolonged COVID-19, the Korean government announced the Digital New Deal policy on July 14, 2020. The Digital New Deal policy's primary goal is to create new businesses by accelerating digital transformation in the public sector and industries around data, networks, and artificial intelligence technologies. However, in a rapidly changing social environment, information asymmetry of the future benefits of technology can cause differences in the public's ability to analyze the direction and effectiveness of policies, resulting in uncertainty about the practical effects of policies. On the other hand, the media leads the formation of discourse through communicators' role to disseminate government policies to the public and provides knowledge about specific issues through the news. In other words, as the media coverage of a particular policy increases, the issue concentration increases, which also affects public decision-making. Therefore, the purpose of this study is to verify the dynamic relationship between the media coverage and the stock market on the Korean government's digital New Deal policy using Granger causality, impulse response functions, and variance decomposition analysis. To this end, the daily stock turnover ratio, daily price-earnings ratio, and EWMA volatility of digital technology-based companies related to the digital new deal policy among KOSDAQ listed companies were set as variables. As a result, keyword search volume, daily stock turnover ratio, EWMA volatility have a bi-directional Granger causal relationship with media coverage. And an increase in media coverage has a high impact on keyword search volume on digital new deal policies. Also, the impulse response analysis on media coverage showed a sharp drop in EWMA volatility. The influence gradually increased over time and played a role in mitigating stock market volatility. Based on this study's findings, the amount of media coverage of digital new deals policy has a significant dynamic relationship with the stock market.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.3
• /
• pp.38-55
• /
• 2019

The purpose of this study is to clarify the historical flow of baekdong alloy's usage according to the alloying materials mentioned in document records. For this purpose, we first overviewed the use of copper as a base material for white copper alloys and other types of copper alloys. Baekdong is an alloy of copper and other metals and is currently defined as an alloy of copper and nickel. However, depending on the research subjects and time of the scholars, baekdong may be defined as a metal with over a certain percentage of tin added to copper, or as an alloy of tin, zinc, and lead with copper. There is disagreement regarding the interpretation of this term. Baekdong, which started to appear in the literature of the Three Kingdoms Period, has been steadily seen through the Goryeo and Chosun Dynasties to the modern period. It has been used in various ways, according to each age and culture, from the symbol of the office to trading goods, daily life goods, and money. In the literature, baekdong's alloying material is not only copper and nickel, which are currently defined as alloys, but it is the same in that copper is used as the base metal of the alloy, although it varies slightly from generation to generation. In addition to copper, tin, zeolite, and emerald, zinc and lead also appeared. It was found that baekdong, which means alloy, and baekdong, which means white metal, were mixed. Nickel, which is the alloy material of baekdong as it is currently defined, is a metal with a relatively high discovery time and is widely used as a material for modern industrial fields. Nickel was introduced into Korea at the end of the Joseon Dynasty, but its use is not known in detail. In this study, we examined the acceptance and use of nickel-based baekdong in articles of modern newspapers and in statistical data. Based on the experience of craftsmen, we estimated the period when nickel-based alloys were used in crafts. Material is a direct factor in the development and deterioration of technology, and the development of technology is the basis for the changing of civilizations and cultures. In this context, this study was to investigate baekdong with the material of alloys as a starting point.