• Journal of the Korean Wood Science and Technology
• /
• v.13 no.3
• /
• pp.41-48
• /
• 1985

In near future about 500,000 hectares of Japanese larch and pitch pine need thinning to improve crop-tree spacing and reasonable species composition in Korea. Although thinned trees show very little high quality wood, in fact, all the sawed products are suitable for construction and farming materials. Studies on the utilization of thinned small-diameter trees have been implemented in order to increase lumber yield and display the skeleton of farm buildings. The results obtained in this study were summarized as follows: 1. According to Korean Conifers Log Grading System, log grade 3 was 87.4 percent in Japanese larch bolts and 95.8 percent in pitch pine bolts from thinned trees. The ability to identify defects was essential for grading logs. 2. Cutting diagrams of sawing were developed for 1-sided sawing, 2-sided sawing and 3-sided sawing by small end diameter class of bolt and cutting sizes also were found to use effectively lumber with wane. 3. Lumber recovery of Pitch pine was a little higher than that of Japanese larch. The maximum lumber yields of pitch pine by sawing patterns were 87.2 percent for 1-sided sawing, 80.8 percent for 2-sided sawing an 64.1 percent for 3-sided sawing, up yield compared with 58.1 percent for 4-sided sawing. The lumber yield of 1, 2 and 3-sided sawing significantly was higher value than that of 4-sided sawing. 4. Lumber was inspected and graded. Lumber quality of diameter class 12cm was a little better than that of diameter class 8cm, but 90 percent of lumber in diameter c1ass 16cm fell into grade 3. The lumber grade was classified by Korean standard grades of confiers lumber. 5. Lumber from 1, 2 and 3-sided sawing was used to build the skeleton of a farm house ($53m^2$) and greenhouse ($60m^2$) in order to display more efficient use of small diameter trees from thinning 6. Total volume of timber for building a farm house was $8.1m^3$ of imported timber. Timber of $7m^3$, 70 percent of total volume would be substituted imported timber for domestic timber.

• Journal of Environmental Science International
• /
• v.14 no.12
• /
• pp.1119-1127
• /
• 2005

The management of data on biological diversity is presently complex and confusing. This study was initiated to construct a database so that such data could be stored in a data management, and analysis instrument to correct the problems inherent in the current incoherent storage methods. MySQL was used in DBMS(DataBase Management System), and the program was basically produced using Java technology Also, the program was developed so people could adapt to the requirements that are changing every minute. We hope this was accomplished by modifying easily and quickly the advanced programming technology and patterns. To this end, an effective and flexible database schema was devised to store and analyze diversity databases. Even users with no knowledge of databases should be able to access this management instrument and easily manage the database through the World Wide Web. On a basis of databases stored in this manner, it could become routinely used for various databases using this analysis instrument supplied on the World Wide Web. Supplying the derived results by using a simple table and making results visible using simple charts, researchers could easily adapt these methods to various data analyses. As the diversity data was stored in a database, not in a general file, this study makes the precise, error-free and high -quality storage in a consistent manner. The methods proposed here should also minimize the errors that might appear in each data search, data movement, or data conversion by supplying management instrumentation on the Web. Also, this study was to deduce the various results to the level we required and execute the comparative analysis without the lengthy time necessary to supply the analytical instrument with similar results as provided by various other methods of analysis. The results of this research may be summerized as follows: 1)This study suggests methods of storage by giving consistency to diversity data. 2)This study prepared a suggested foundation for comparative analysis of various data. 3)It may suggest further research, which could lead to more and better standardization of diversity data and to better methods for predicting changes in species diversity.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.4
• /
• pp.350-357
• /
• 2017

This study was conducted as a post - study on the development of a centralized controller and a hydraulic lift system including structural analysis and remote control for the development of a vertically elevated car. The safety review was carried out through the structural modification of the elevator lift which was developed during the previous research. 3D modeling was performed with Solidworks, and a model of finite element was created through Hypermesh S / W. In addition, the loading environment of the work vehicle for the evaluation is a condition in which the loading amount is 250 kg per position (total, upper, upper, lower, and lower) on the work table, ), The structural analysis was carried out under the condition that the load was 600 kg, and safety was examined in various aspects. As a result, when the allowable load of 250 kg and the excess load of 600 kg are excluded (except Case-11), the stress level is below the yield strength. In the case of Case-11, there is a region exceeding the yield strength at the center support portion of the safety bar at the upper end even after excluding the component which generates the maximum stress, but it does not affect the safety aspect of the whole structure Respectively. Looking at the deflection results, it can be seen that in all cases the maximum deflection occurs in the same table, and the tendency of sagging in both 250 kg and 600 kg is the same.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.11
• /
• pp.27-32
• /
• 2019

This study examined the mediated effects of job satisfaction and the control effects of the perceived organizational support awareness on the effects of safety awareness recognized by construction workers on unsafe acts as a way to reduce unsafe acts. To this end, 439 workers at 23 construction sites across the country received a questionnaire from July 1 to July 20, 2019 and the data were analyzed, which resulted in the following conclusions. First, the sense of safety in which construction workers are late has a direct influence on job satisfaction. Second, job satisfaction recognized by construction workers has been shown to have a direct negative effect on the anxiety act. Third, job satisfaction was influenced by the medium in relation to safety awareness and anxiety transfer act recognized by construction workers. Fourth, the adjustment effect of the perceived organizational support awareness in the relationship between safety awareness and task satisfaction was shown to be significant. This study suggests that to prevent unsafe acts at construction sites, increased safe acts reduce the level of anxiety transfer due to a high sense of safety and job satisfaction by workers.

• Journal of Animal Science and Technology
• /
• v.48 no.6
• /
• pp.813-818
• /
• 2006

The objective of this study was to investigate effects of supplementation levels of L-leucine in low-lysine diets on growth performance and meat quality parameters in finishing Duroc pigs. A total of fifty-four pigs with an average initial weight of 74±1kg were allotted to one of three dietary treatments. Each treatment had six replications of three pigs per replicate. The treatment diets included 1)a corn-soybean meal basal diet containing lysine as low as 0.45% (CON), 2) basal diet plus 1.5% L-leucine (LEU 1.5), and 3) basal diet plus 3.0% L-leucine (LEU 3.0). No difference was found in ADG, ADFI and Feed/Gain among treatments. In carcass parameters, dressing precent and back-fat thickness were not affected by L-leucine levels, however, longissimus dorsi area tended to increase by supplementation of L-leucine. Marbling score was significantly higher (P<0.05) in LEU 1.5 and LEU 3.0 than in CON. In meat quality parameters, CIE L* of meat color significantly increased (P<0.05) and crude fat tended to increase by supplementation of L-leucine. However, there was no difference in water holding capacity, cooking loss and shear force value. This study suggests that dietary supplementation of L-leucine in low-lysine diets at the end of finishing period can produce high marbled pork which is preferred by Korean consumers.

• Journal of Applied Biological Chemistry
• /
• v.54 no.4
• /
• pp.303-308
• /
• 2011

To develop food and organoleptic quality of gochujang 0, 3, 4, and 5% of sweet persimmon powder were added to Korean traditional red pepper paste during fermentation and microbiological and organoleptic characteristics were investigated. The total bacteria count of the gochujang tended to increase slowly until a level of $10^8$ CFU/g with increasing fermentation time. There was no significant difference (p <0.05) between the control and the treatment during fermentation. The number of yeast and mold was $10^4-10^5$ CFU/g during fermentation. Sensory evaluation after 30, 60, and 90 days of fermentation showed that addition of sweet persimmon powder to the gochujang did not affect its color, but the level of sweetness and umami, increased as additional level of sweet persimmon powder increased. In the overall acceptabilty, there was no significant difference (p <0.05) until 30 days of fermentation and the gochujang added with 4% sweet persimmon powder showed the highest organoleptic value. And it showed high score in sweetness, umami and overall acceptability at the end of fermentation. The results indicated that 4% additional level of sweet persimmon powder was the best making gochujang.

• Journal of Korea Technology Innovation Society
• /
• v.19 no.3
• /
• pp.511-544
• /
• 2016

Standards boost technological innovation by promoting information sharing, compatibility, stability and quality. Identifying groups of companies that particularly benefit from these functions of standards in their technological innovation and commercialization helps to customize planning and implementation of standards-related policies for demand groups. For this purpose, this study engages in profiling of SMEs whose R&D objective is to respond to standards as well as those who need to implement standards system for technological commercialization. Then it suggests a prediction model that can distinguish such companies from others. To this end, decision tree analysis is conducted for profiling of characteristics of subject SMEs through data mining. Subject SMEs include (1) those that engage in R&D to respond to standards (Group1) or (2) those in need of product standard or technological certification policies for commercialization purposes (Group 2). Then the study proposes a prediction model that can distinguish Groups 1 and 2 from others based on several variables by adopting discriminant analysis. The practicality of discriminant formula is statistically verified. The study suggests that Group 1 companies are distinguished in variables such as time spent on R&D planning, KoreanStandardIndustryClassification (KSIC) category, number of employees and novelty of technologies. Profiling result of Group 2 companies suggests that they are differentiated in variables such as KSIC category, major clients of the companies, time spent on R&D and ability to test and verify their technologies. The prediction model proposed herein is designed based on the outcomes of profiling and discriminant analysis. Its purpose is to serve in the planning or implementation processes of standards-related policies through providing objective information on companies in need of relevant support and thereby to enhance overall success rate of standards-related projects.

• Korean journal of applied entomology
• /
• v.43 no.4 s.137
• /
• pp.305-310
• /
• 2004

The development of Myzus persicae (Sulzer) was studied at temperatures ranging from 15 to $32.5^{\circ}C$ under $70{\pm}5\%$ RH, and a photoperiod of 16:8 (L:D). Mortality of 1st-2nd nymph was higher than that of 3rd-4th nymph at the most temperature ranges whereas at high temperature of $32.5^{\circ}C$, more 3-4nymph stage individuals died. The total developmental time ranged from 12.4 days at $15^{\circ}C$ to 4.9 days at $27.5^{\circ}C$, suggesting that higher the temperature, faster the development. However, at higher end temperature ranges of 30 and $32.5^{\circ}C$, the development took 5.0 and 6.3 days, respectively. The lower developmental threshold temperature and effective accumulative temperatures for the total immature stage were $4.9^{\circ}C$ and 116.5 day-degrees. The nonlinear shape of temperature related development was well described by the modified Sharpe and DeMichele model. When the normalized cumulative frequency distributions of developmental times for each life stage were fitted to the three-parameter Weibull function, attendance of shortened developmental times was apparent with pre-nymph, post-nymph, and total nymph stages in descending order. The coefficient of determination $r^2$ ranged between 0.87 and 0.94.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.14
• /
• pp.6073-6080
• /
• 2015

Background: Melanoma differentiation-associated gene-7 (MDA-7)/interleukin-24 (IL-24), a unique tumor suppressor gene, has killing activity in a broad spectrum of cancer cells. Herein, plasmids producing mda-7 proteins fused to different RGD peptides (full RGD4C and shortened RGD, tRGD) were evaluated for apoptosis induction with a hepatocellular carcinoma cell line, Hep-G2. The study aim was to improve the apoptosis potency of mda-7 by tethering to RGD peptides. Materials and Methods: Three plasmids including mda-7, mda-7-RGD and mda-7-tRGD genes beside a control vector were transfected into Hep-G2 cells. After 72 hours incubation, cell viability was evaluated by MTT assay. In addition, the rate of apoptosis was analyzed by flow cytometry using PI/annexin staining. To detect early events in apoptosis, 18 hours after transfection, expression of the BAX gene was quantified by real time PCR. Modeling of proteins was also performed to extrapolate possible consequences of RGD modification on their structures and subsequent attachment to receptors. Results and Conclusions: In MTT assays, while all mda-7 forms showed measurable inhibition of proliferation, unmodified mda-7 protein exhibited most significant effect compared to control plasmid (P<0.001). Again, flow cytometry analysis showed a significant apoptosis induction by simple mda-7 gene but not for those RGD-fused mda-7 proteins. These findings were also supported by expression analysis of BAX gene (P<0.001). Protein modelling analysis revealed that tethering RGD at the end of IL-24/Mda7 disrupt attachment to cognate receptor, IL-20R1/IL-20R2. In conclusion, fusion of RGD4C and shortened RGD peptides to carboxyl terminal of mda7, not only reduce apoptosis property in vitro but also disrupt receptor attachment as demonstrated by protein modelling.

• Smart Media Journal
• /
• v.9 no.3
• /
• pp.107-115
• /
• 2020

Recently, BIM has become mandatory in the construction field, research on various use cases is increasing. In particular, when virtual reality technology, one of the core technologies of the 4th industrial revolution, and BIM are combined, it can be used in various fields such as preliminary design review and construction simulation. Until now, however, virtual reality grafting technology is only used as a simple prototype or as a model house. Also, it is difficult to activate virtual construction because it is expensive to produce high-quality virtual reality contents. Therefore, in this paper, in order to increase the utilization and quality of the virtual construction field, a study was conducted to shorten the material mapping time, which takes a lot of time when producing virtual reality contents using BIM. To this end, object properties were assigned to enable material mapping in the BIM model, and materials most used in the construction field were configured, and automated material function development and final tests were conducted that automatically map properties and materials. For the test, 10 models were used and the test was repeated three times, and the productivity improvement of about 50.16% was finally achieved. In the future, we plan to conduct research on physical data weight reduction based on the advanced material mapping automation function and the large-capacity BIM model.