• 생물환경조절학회지
• /
• 제21권3호
• /
• pp.170-179
• /
• 2012

시판중인 여섯 가지 종류의 코이어 자루배지에 세 가지 전처리 방법을 실시하고, 처리 과정에서 생성되는 배액을 분석함으로써 경제적이며 간단하게 칼륨과 나트륨을 제거할 수 있는 전처리 방법을 구명하고자 2차에 걸쳐 실험을 수행했다. 1차 실험에서는 시판중인 코이어 자루 중에서 전처리가 되었고, 농가에 많이 보급된 6가지 배지를 선정하여, 7일간 물로 씻는 처리(W7S0), 물로 3일간 씻고 배양액으로 4일간 씻는 처리(W4S3), 배양액으로 7일간 씻는 처리(W0S7)의 세 가지 전처리를 했다. 2차 실험에서는 Bio Grow와 coco Mix 배지를 대상으로 1차 실험과 동일한 방법으로 재현성을 확인했다. 실험결과 pH의 안정화에 좋은 전처리 방법은 W4S3 처리와 W0S7 처리였다. EC는 세 처리 모두에서 4일차가 되면 공급 EC와 같은 1.0 이하로 안정되었다. 배액의 이온은 W7S0에서는 처리 3~4일 이후에 안정화 되지만 대부분의 이온들이 용탈되어 Ca와 Mg의 부족이 발생했고, 4일 이상을 씻는 것은 물의 낭비로 판단되었다. W0S7에서는 배지의 안정화는 W4S3 처리와 유사했으나 배양액으로 7일간 씻어주는 것은 경제적으로 손실인 것으로 사료된다. 두 가지 배지를 사용한 재현성 실험에서도 비슷한 결과를 보였다. 따라서 농가에서 사용하기에 가장 간단하고 경제적인 전처리 방법은 물로 3일간 씻어준 후 배양액으로 1일간 포수시킨 후에 정식하는 방법으로 사료된다.

• 한국지반공학회논문집
• /
• 제29권4호
• /
• pp.45-56
• /
• 2013

본 연구에서는 자원 재활용을 위해 시멘트를 전혀 사용하지 않고 잠재 수경성을 지닌 고로슬래그를 이용하여 사질토를 고결시키고자 하였다. 알칼리 활성화제에 의해 경화되는 고로슬래그의 함유량과 알칼리 활성화제의 종류를 달리 하여 이들이 사질토의 조기강도에 미치는 영향에 대하여 연구하였다. 고로슬래그의 함유량을 사질토의 4, 8, 12, 16%로 하고 여섯 종류(두 종류의 천연재료, 네 종류의 화학약품)의 알칼리 활성화제를 사용하여 공시체를 제작하였다. 제작한 공시체는 3일 또는 7일 동안 대기중 양생한 다음 일축압축강도시험을 실시하였다. 알칼리 활성화제 종류에 따른 일축압축강도는 탄산칼륨, 수산화칼슘, 수산화나트륨, 수산화칼륨 순으로 높게 측정되었으며, 동일한 성분을 가진 천연재료보다 화학약품을 사용한 공시체의 일축압축강도가 높게 나타났다. 3일 양생한 공시체 중 최대 일축압축 강도가 발현된 것은 16%의 고로슬래그에 수산화칼륨을 사용한 경우로 3MPa 정도의 강도가 측정되었으며, 이는 초속 경시멘트 16%를 사용한 공시체 강도의 37%에 해당된다. 알칼리 활성화제 종류에 관계없이 고로슬래그 함유량이 증가함에 따라 건조밀도가 증가하면서 일축압축강도도 증가하였으며, 양생기간이 3일에서 7일로 증가함에 따라 최대 97%의 강도 증가가 발생하였다. 고결된 모래의 XRD 분석 결과 C-S-H 화합물이 생성되었으며, SEM 분석 결과에서는 고로슬래그 함유량이 증가할수록 생성되는 수화물도 증가하여 모래 입자를 에워싸는 형태를 보였다.

• 대한환경공학회지
• /
• 제38권2호
• /
• pp.79-86
• /
• 2016

본 연구의 목적은 RO 농축수 내 TDS 제어에 따른 고농도 질산성 질소의 효율적인 생물학적 처리에 있다. 실험실 규모의 실험에서는 연속회분식 반응기를 이용하여 연구를 수행하였으며 TDS의 주입조건에 따른 비탈질율, 비산소소비율 분석을 수행하였다. 연구결과, 연속회분식 반응기를 이용한 운전에 따라 탈질 공정 내 고농도 TDS 주입에 따라 탈질 반응이 지연되어 SDNR이 감소하는 것으로 나타났으며 미생물 활성도가 또한 감소하는 것으로 나타났다. 따라서 질산성 질소의 원활한 처리를 위하여 TDS 제어가 수반되어야 하며 특히, $Ca^{2+}$의 중점적인 처리가 필요할 것으로 판단된다. 또한 본 연구를 통하여 도출된 SDNR, SOUR 값은 호기성 그래뉼 슬러지를 이용한 RO 농축수의 생물학적 처리를 위한 공정 설계인자로 활용이 가능할 것으로 판단된다.

• 환경영향평가
• /
• 제22권2호
• /
• pp.135-145
• /
• 2013

The recycling of coal bottom ash generated from coal power plants in Korea has been limited due to heterogenous characteristics of the materials. The most common management option for the ash is disposal in landfills (i.e. ash pond) near ocean. The presence of large coarse and fine materials in the ash has prompted the desire to beneficially use it in an application such as fill materials. Prior to reuse application as fill materials, the potential risks to the environment must be assessed with regard to the impacts. In this study, a total of nine test cells with bottom ash samples collected from pretreated bottom ash piles and coal ash pond in a coal-fired power plant were constructed and operated under the field conditions to evaluate the leachability over a period of 210 days. Leachate samples from the test cells were analyzed for a number of chemical parameters (e.g., pH, salinity, electrical conductance, anions, and metals). The concentrations of chemicals detected in the leachate were compared to appropriate standards (drinking water standard) with dilution attenuation factor, if possible, to assess potential leaching risks to the surrounding area. Based on the leachate analysis, most of the samples showed slightly high pH values for the coal ash contained test cells, and contained several ions such as sodium, potassium, calcium, magnesium, chloride, sulfate, and nitrate in relatively large quantities. Three elements (aluminum, boron, and barium) were commonly detected above their respective detection limits in a number of leachate samples, especially in the early leaching period of time. The results of the test cell study indicate that the pollutants in the leachate from the coal ash test cells were not of a major concern in terms of leaching risk to surface water and groundwater under field conditions as fill materials. However, care must be taken in extending these results to actual applications because the results presented in this study are based on the limited field test settings and time frame. Structural characteristics and analysis for coal bottom ash may be warranted to apply the materials to actual field conditions.

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권12호
• /
• pp.1761-1768
• /
• 2005

Effects of alpha-galactosidase (GAL) on broiler corn-soybean meal diet was investigated. In experiment 1, sixty cockerels were allocated to five groups, including three enzyme treatments (GAL added at 0, 500, and 1,000 mg/kg diet), a nitrogen-free diet group and a fast group. The true nitrogen-corrected ME (TME$_n$) and true amino acid availability were determined. In experiment 2, 324 day-old chicks were used in a 2${\times}$3 factorial design consisting of two energy contents (high and low) and three GAL levels (0, 250, and 500 mg/kg). Three feeding phases, comprising 0-21 d, 22-35 d and 36-48 d, were involved. GAL addition improved TME$_n$ and the availability of methionine and cystine (p<0.05). The apparent ME (AME) or nitrogen-corrected AME (AME$_n$) and digestibility of dry matter, organic matter, calcium, and phosphorus were improved significantly on d 21, so was crude protein and an interaction of energy and GAL on AME$_n$ (p<0.05) was found on d 35. However, daily intake and daily gain were significantly improved with GAL addition (p<0.05) during 21 d. The small intestine relative weight decreased at 250 mg/kg GAL (p<0.05) on d 35, whereas presented an interaction between GAL and energy on d 21 (p<0.05). Likewise, this treatment increased breast muscle ratio (p<0.05). On d 21, triglycerides level of broilers showed interaction between energy and enzyme levels (p<0.05). Uric acid level in 500 mg/kg GAL declined linearly (p<0.05). On d 35, quadratic effects (p<0.05) were observed in total protein, albumin, globulin and cholesterol content for enzyme supplementation. And the interactive effects of energy and GAL on serum values showed more obviously. The study implies that GAL improved energy and nutrient availability of corn-soybean meal diet in broiler. The GAL supplementation to corn-soybean meal based diet can improve performance of broilers in early stages of growth.

• IMMUNE NETWORK
• /
• 제2권3호
• /
• pp.175-181
• /
• 2002

Background: S100A6 is a calcium-binding protein overexpressed in several tumor cell lines including melanoma with high metastatic activity and involved in various cellular processes such as cell division and differentiation. To detect S100A6 protein in patient' samples (ex, blood or tissue), it is essential to produce a monoclonal antibody specific to the protein. Methods: First, cDNA coding for ORF region of human S100A6 gene was amplified and cloned into the expression vector for GST fusion protein. We have produced recombinant S100A6 protein and subsequently, monoclonal antibodies to the protein. The specificity of anti-S100A6 monoclonal antibody was confirmed using recombinant S100A recombinant proteins of other S100A family (GST-S100A1, GST-S100A2 and GST-S100A4) and the cell lysates of several human cell lines. Also, to identify the specific recognition site of the monoclonal antibody, we have performed the immunoblot analysis with serially deleted S100A6 recombinant proteins. Results: GST-S100A6 recombinant protein was induced and purified. And then S100A6 protein excluding GST protein was obtained and monoclonal antibody to the protein was produced. Monoclonal antibody (K02C12-1; patent number, 330311) has no cross-reaction to several other S100 family proteins. It appears that anti-S100A6 monoclonal antibody reacts with the region containing the amino acid sequence from 46 to 61 of S100A6 protein. Conclusion: These data suggest that anti-S100A6 monoclonal antibody produced can be very useful in development of diagnostic system for S100A6 protein.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제22권5호
• /
• pp.71-81
• /
• 2017

The hydrogeochemical characteristics of groundwater in the small waterworks are examined with 81 groundwater samples in Ulju region, Ulsan. The pH ranged in 6.3-8.2 and did not exceed the drinking water standards. Electrical conductivity ranged from $50{\mu}S/cm$ to $1,719{\mu}S/cm$. It indicated that the electrical conductivities in groundwaters at the study area are relatively low, compared with other groundwaters in Ulsan area. The calcium concentrations in groundwaters ranged from 3.55 to 113.01 mg/L, and sodium concentrations ranged from 2.02 to 65.50 mg/L. Nitrate concentrations ranged from 0 to 100.56 mg/L and potassium concentrations ranged from N.D (not detected) to 2.50 mg/L. Major cations and anions were mainly derived from the water-rock interaction involving feldspar, gypsum and calcite. The groundwaters were mainly the $Ca-(Na)-HCO_3$ type, classified as the early stage of groundwater evolutions. The correlation between electrical conductivities and Ca concentrations in groundwaters was relatively high ($R^2=0.74$). In the correlations between ions, the correlation coefficient between $SO_4$ and Ca was 0.65 and between Mg and $HCO_3$ was 0.65.

• Journal of Periodontal and Implant Science
• /
• 제47권2호
• /
• pp.116-131
• /
• 2017

Purpose: The entry of bacteria or harmful substances through the epithelial seal of human gingival keratinocytes (HGKs) in the junctional epithelium (JE) is blocked by specialized intercellular junctions such as E-cadherin junctions (ECJs). However, the influence of roughened substrates, which may occur due to apical migration of the JE, root planing, or peri-implantitis, on the development of the ECJs of HGKs remains largely unknown. Methods: HGKs were cultured on substrates with varying levels of roughness, which were prepared by rubbing hydrophobic polystyrene dishes with silicon carbide papers. The activity of c-Jun N-terminal kinase (JNK) was inhibited with SP600125 or by transfection with JNK short hairpin RNA. The development of intercellular junctions was analyzed using scanning electron microscopy or confocal laser scanning microscopy after immunohistochemical staining of the cells for E-cadherin. The expression level of phospho-JNK was assessed by immunoblotting. Results: HGKs developed tight intercellular junctions devoid of wide intercellular gaps on smooth substrates and on rough substrates with low-nanometer dimensions (average roughness $[Ra]=121.3{\pm}13.4nm$), although the ECJs of HGKs on rough substrates with low-nanometer dimensions developed later than those of HGKs on smooth substrates. In contrast, HGKs developed short intercellular junctions with wide intercellular gaps on rough substrates with mid- or high-nanometer dimensions ($Ra=505.3{\pm}115.3nm$, $867.0{\pm}168.6nm$). Notably, the stability of the ECJs was low on the rough substrates, as demonstrated by the rapid destruction of the cell junction following calcium depletion. Inhibition of JNK activity promoted ECJ development in HGKs. JNK was closely associated with cortical actin in the regulation of ECJs in HGKs. Conclusions: These results indicate that on rough substrates with nanometer dimensions, the ECJs of HGKs develop slowly or defectively, and that this effect can be reversed by inhibiting JNK.

• Journal of Periodontal and Implant Science
• /
• 제29권1호
• /
• pp.51-63
• /
• 1999

Exposure of the root surface due to gingival recession after periodontal surgery, elicit pain response when exposed to mechanical, heat, chemical or osmotic irritation. Especially patients treated with periodontal surgery, show high frequency. There have been reports that the 1 out of 7 patients complains of dentinal hypersensitivity. There have been many studies on the clinical effects of various materials on the treatment of dentinal hypersensitivity. The purposes of this study were to evaluate the effect of sodium chloride and potassium oxalate and to observe the relationship between the dentinal hypersensitivity and surface characteristics such as dentinal tubule size and number. This study included 20 teeth which were scheduled for extraction and had no pulpal disease. These teeth were divided into Root planing group, EDTA group, NaCl group and Oxalate group. Dentinal hypersensitivity is measured by tactile, pressured air and cold water using NRS (Numerical Rating Scales). Teeth were extracted under local anesthesia and each specimen was sectioned to a size about 3 X 5 mm and was examined under the scanning electron microscope (X2,000) The results were as follows, 1. The EDTA group exhibited significantly increased dentinal hypersensitivity comparing with the other groups. 2. The NaCl and Oxalate groups showed significantly reduced dentinal hypersensitivity comparing with the EDTA group. 3. As a method for dentinal hypersensitivity measurement, it was presumed thet tactile sensitivity test was not sensitive method but air blast test and cold water test were adequate method. 4. In a SEM study, the root planing group exhibited amorphous smear layer and showed no dentinal tubule orifice, but the EDTA group showed the large number of dentinal tubules. On the other hand, the NaCl and Oxalate groups did not show exposed dentinal tubules. The NaCl group showed more rough root surface than the EDTA group, and the Oxalate group showed many participates to be presumed as calcium oxalate particle. As the results from this study, root planing couldn't expose the dentinal tubule and NaCl and potassium oxalate occluded exposed dentinal tubule effectively. Dentinal hypersensitivity has close relationship with the exposure of dentinal tubules, especially with it's size and number.

• 대한지역사회영양학회지
• /
• 제12권1호
• /
• pp.90-105
• /
• 2007

This study was conducted to assess macro- and micronutrient compositions in school lunch menus based on the 'Dietary Guideline' for School Lunches. Ninety-five dieticians in elementary school in Chungbuk were asked to complete a questionnaire on characteristics of the school lunch program(such as type of foodservice, food production system), the information about dietitians(such as age, education, and job history), and the extent of the use of processed foods and frozen foods. Dey were asked to return the questionnaire with the menus including the name and the quantity of every food ingredient offered during a week. A total of 554 lunch menus provided for a week of June 2004 were analyzed. Average nutrient content per meal was as follows; 660kcal, energy; 92.9g, carbohydrate; 26.7g, protein; 21.1g, fat; 287 ${\mu}gRE$, vitamin A: 0.5mg, thiamin; 0.5mg, riboflavin; 29.3mg, vitamin C: 338.2mg, calcium; 3.9mg, iron; and 97mg, cholesterol. Average percentages of energy from carbohydrate, protein and fat was 56.2%, 16.2%, and 29.0%, respectively. The mean nutrient content per meal was higher in rural-type than in urban-type schools. The weekly menu of 40% of the schools provided <55% of energy from carbohydrate, and 39% of the schools offered lunch that provided ${\geq}30%$ of energy from fat. The micronutrient content was generally high when the percent energy from fat was less than 25%. Our results showed that only 52.6% of the schools provided lunches with the energy composition as in the 'Dietary Guideline' of School Lunches. Whole Milk was the major contributor to fat, saturated fatty acid and cholesterol. We suggest that school foodservices start to provide low fat milk instead of whole milk to reduce fat, saturated fatty acid and cholesterol. If low fat milk is served instead of whole milk, percentage of energy from fat and saturated fat can be reduced from 29% to 25%, and ken 10.2% to 9.1%, respectively, and cholesterol could be reduced from 97mg to 79mg. Efforts to meet 'Dietary Guideline' for School Lunches should be made, especially to reduce fat intake, while maintaining essential nutrient intake at sufficient levels for childen.