• 제목/요약/키워드: high-Q

검색결과 2,342건 처리시간 0.029초

드롭랜딩 시 Hamstring/Quadriceps ratio 불균형에 따른 하지의 동적 안정성 차이 분석 (Analysis on Differences in Dynamic Stability of Lower Extremity Caused by Unbalance of Hamstring/Quadriceps Ratio During Drop-landing)

  • 홍완기;김민
    • 한국운동역학회지
    • /
    • 제25권1호
    • /
    • pp.49-56
    • /
    • 2015
  • Objectives : The purpose of this study was to present quantitative data and basic references to decrease the accident risk of soccer instructors. Methods : To obtain data, we conducted an investigation on how H/Q ratio affects the dynamic stability of the lower extremity at the time of drop landing. The study targeted 13 soccer players from C University who have not had any injuries or wounds in the lower extremity joints and in any other parts of their bodies over the last 6 months. By using CMIS (USA), the players were divided into two groups according to H/Q ratios higher and lower than 69%, respectively. The subjects in each group were instructed to perform a drop landing. Results : The H/Q ratio did not affect the maximal flexion angle of the knee joints at the time of drop landing. In addition the dominant group with a relatively high H/Q ratio was observed to have increased time to reduce shock and to efficiently absorb the ground reaction force during drop landing. Also, the dominant group with a relatively high H/Q ratio utilized the strong performances of the antagonistic muscles around the hamstrings and the controlled rotatory powers of the thighs that were applied to the tibias supported by the ground. Finally, H/Q ratio, load factors, and mean and maximum EMG were significantly negatively related, whereas GRFx showed a positive relationship. In fact, these factors all affected the impact of the load from the H/Q ratio to the knee joints. Conclusion : From these findings it can be concluded that unbalanced H/Q ratio can be considered as a predictor of knee joint injury at the time of drop landing.

단순화된 Pockels cell Q-switch용 구동기 개발 및 특성에 관한 연구 (A study of the development of a simple driver for the Pockels cell Q-switch and Its characteristics)

  • 박구렬;정종한;홍정환;김병균;문동성;김휘영;김희제;조정수
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2000년도 하계학술대회 논문집 C
    • /
    • pp.2116-2118
    • /
    • 2000
  • In the technique of Q-switching, very fast electronically controlled optical shutters can be made by using the electro-optic effect in crystals or liquids. The driver for the Pockels cell must be a high-speed, high-voltage switch which also must deliver a sizeable current. Common switching techniques include the use of vacuum tubes, cold cathode tubes, thyratrons, SCRs, and avalanche transistors. Semiconductor devices such as SCRs, avalanche transistors, and MOSFETs have been successfully employed to drive Pockels cell Q-switch. In this study, a simple driver for the Pockels cell Q-switch was developed by using SCRs, pulse transformer and TTL ICs. The Pockels cell Q-switch which was operated by this driver was employed in pulsed Nd:YAG laser system to investigate the operating characteristics of this Q-switch. And we have investigated the output characteristics of this Q-switch as a function of the Q-switch delay time to Xe flashlamp current on.

  • PDF

Association between cadmium exposure and hearing impairment: a population-based study in Korean adults

  • Jung, Da Jung
    • Journal of Yeungnam Medical Science
    • /
    • 제36권2호
    • /
    • pp.141-147
    • /
    • 2019
  • Background: The present study aimed to evaluate the clinical association between cadmium exposure and hearing impairment among the Korean population. Methods: This retrospective cross-sectional study used the data obtained from the Korean National Health and Nutrition Examination Survey were used for our study. Finally, 3,228 participants were included in our study, which were then divided into quartiles based on their blood cadmium levels: first quartile (1Q), second quartile (2Q), third quartile (3Q), and fourth quartile (4Q) groups. The hearing thresholds were measured using an automatic audiometer at 0.5, 1, 2, 3, 4, and 6 kHz. Hearing loss (HL) was defined as >25 dB average hearing threshold (AHT). Results: All the groups had 807 participants each. The area under the receiver operating characteristic curves of cadmium level for HL were 0.634 (95% confidence interval [CI], 0.621-0.646). The participants in the 4Q group had higher Low/Mid-Freq, High-Freq, and AHT values than those in the other groups in the multivariate analysis after adjusting for confounding factors. The logistic regression showed that the OR for HL per $1{\mu}g/L$ increase in cadmium was 1.25 (95% CI, 1.09-1.44; p=0.002) on the multivariate analysis. Moreover, the multivariate logistic regression analyses revealed that the participants in the 4Q group exhibited a 1.59-, 1.38-, and 1.41-fold higher odds for HL than those in the 1Q, 2Q, and 3Q groups, respectively. Conclusion: High cadmium level quartile was associated with increased hearing thresholds and HL among the Korean adult population.

A High Gain and High Harmonic Rejection LNA Using High Q Series Resonance Technique for SDR Receiver

  • Kim, Byungjoon;Kim, Duksoo;Nam, Sangwook
    • Journal of electromagnetic engineering and science
    • /
    • 제14권2호
    • /
    • pp.47-53
    • /
    • 2014
  • This paper presents a high gain and high harmonic rejection low-noise amplifier (LNA) for software-defined radio receiver. This LNA exploits the high quality factor (Q) series resonance technique. High Q series resonance can amplify the in-band signal voltage and attenuate the out-band signals. This is achieved by a source impedance transformation. This technique does not consume power and can easily support multiband operation. The chip is fabricated in a $0.13-{\mu}m$ CMOS. It supports four bands (640, 710, 830, and 1,070MHz). The measured forward gain ($S_{21}$) is between 12.1 and 17.4 dB and the noise figure is between 2.7 and 3.3 dB. The IIP3 measures between -5.7 and -10.8 dBm, and the third harmonic rejection ratios are more than 30 dB. The LNA consumes 9.6 mW from a 1.2-V supply.

STABILITY OF QUADRATIC FUNCTIONAL EQUATIONS IN RANDOM NORMED SPACES

  • Schin, Seung Won;Ki, DoHyeong;Chang, JaeWon;Kim, Min June;Park, Choonkil
    • Korean Journal of Mathematics
    • /
    • 제18권4호
    • /
    • pp.395-407
    • /
    • 2010
  • In this paper, we prove the generalized Hyers-Ulam stability of the following quadratic functional equations $$cf\(\sum_{i=1}^{n}x_i\)+\sum_{j=2}^{n}f\(\sum_{i=1}^{n}x_i-(n+c-1)x_j\)\\=(n+c-1)\(f(x_1)+c\sum_{i=2}^{n}f(x_i)+\sum_{i<j,j=3}^{n}\(\sum_{i=2}^{n-1}f(x_i-x_j\)\),\\Q\(\sum_{i=1}^{n}d_ix_i\)+\sum_{1{\leq}i<j{\leq}n}d_id_jQ(x_i-x_j)=\(\sum_{i=1}^{n}d_i\)\(\sum_{i=1}^{n}d_iQ(x_i)\)$$ in random normed spaces.

하수처리비용을 감안하고 7Q10과 저수량에 기초한 영산강 수질관리방안 연구 (Water Quality Management of the Youngsan River based on the 7Q10 and Q275 considering Wastewater Treatment Cost)

  • 조재현;유태종
    • 상하수도학회지
    • /
    • 제16권6호
    • /
    • pp.700-709
    • /
    • 2002
  • Present condition of the Youngsan River pollution is serious. Concentrations of organic materials and nutrients are high and algal bloom takes place frequently. The pollution is mainly caused by domestic wastewater input from urban areas like Kwangju and Naju City. In this study, 6 times of water quality surveys were done for mainstream and tributaries. Delivery ratios of each tributaries are calculated with the water quality and flow data. With Arc/View GIS, sub-basin are divided and pollution loads are estimated. These data are used for water quality modeling. River quality improvement effects are analysed with 5 scenarios including process upgrade of present WWTPs and construction of new WWTPs. These scenarios are applied for the Youngsan River based on the 7Q10 and Q275. And total wastewater treatment cost in the basin is analysed for each scenario.

Comparative Study on Statistical Packages for using Multivariate Q-technique

  • Choi, Yong-Seok;Moon, Hee-jung
    • Communications for Statistical Applications and Methods
    • /
    • 제10권2호
    • /
    • pp.433-443
    • /
    • 2003
  • In this study, we provide a comparison of multivariate Q-techniques in the up-to-date versions of SAS, SPSS, Minitab and S-plus well known to those who study statistics. We can analyze data through the direct Input method(command) in SAS and use of menu method in SPSS, Minitab and S-plus. The analysis performance method is chosen by the high frequency of use. Widely we compare with each Q-techniques form according to input data, input option, statistical chart and statistical output.

충청남도 도립공원 산림 식생 분석 (Analysis of Forest Vegetation in Chungcheongnam-do Provincial Park of Korea)

  • 김현숙;박관수;이상명;이중구;김정현
    • 한국환경생태학회지
    • /
    • 제32권5호
    • /
    • pp.513-531
    • /
    • 2018
  • 본 연구는 충남도립공원(덕산도립공원, 칠갑산도립공원, 대둔산도립공원)에 분포하고 있는 산림 식생을 비교 분석하기 위해 2006년부터 2016년까지 실시되었다. 본 연구 조사지의 식생을 식물사회학적 방법으로 분석한 결과, 덕산도립공원은 신갈나무군락, 소나무군락, 굴참나무군락 및 느티나무군락으로 구분되었고, 칠갑산도립공원은 굴참나무군락, 신갈나무군락, 소나무군락 및 서어나무군락으로 구분되었으며, 대둔산도립공원은 신갈나무군락, 굴참나무군락 졸참나무군락, 개서어나무군락, 서어나무군락, 소나무군락 및 상수리나무군락으로 구분되었다. 각 도립공원의 중요치는 덕산도립공원에서 신갈나무가 가장 높았으며(72.35), 다음으로 소나무(70.25), 굴참나무(53.11), 때죽나무(11.44), 산벚나무(11.17), 물푸레나무(10.41) 등의 순으로 나타났으며, 칠갑산도립공원에서는 굴참나무가(73.34) 가장 높았고 다음으로 소나무(58.71), 신갈나무(57.02), 서어나무(18.84), 졸참나무(13.48), 산벚나무(13.31) 등의 순으로 나타났다. 대둔산도립공원은 신갈나무가(57.03) 가장 높았고 다음으로 굴참나무(31.98), 졸참나무(31.53), 소나무(16.80), 개서어나무(16.50), 서어나무(16.07), 쪽동백나무(15.76), 당단풍나무(10.09) 등의 순으로 나타났다. 중요치가 높은 주요 분류군에 대한 흉고직경급을 분석한 결과 덕산도립공원에서는 신갈나무, 굴참나무가 정규분포형의 밀도를 나타내고 있어 당분간은 이들 수종의 우점 상태가 계속될 것으로 보인다. 칠갑산도립공원에서는 굴참나무, 신갈나무, 소나무가 정규분포형의 밀도를 나타내고 있어 당분간은 이들 수종의 우점 상태가 계속될 것으로 보이나 서어나무와, 졸참나무의 어린 개체 밀도가 높아 앞으로 이들의 세력이 확장될 것으로 판단된다. 대둔산도립공원은 신갈나무와 굴참나무는 어린개체의 밀도가 높은 역 J자형을 하고 있어 우점 상태가 계속될 것으로 보이며, 개서어나무와 소나무는 어린 개체와 큰 개체의 밀도가 낮고, 중간 개체의 밀도가 높아 정규분포형의 밀도를 나타내고 있는 것으로 보아 당분간은 이들 수종에 의한 우점 상태가 계속될 것으로 판단된다. 서어나무와 졸참나무는 중간이상의 개체와 비교해 볼 때 어린 개체의 밀도가 높아 앞으로 이들의 우점도가 증가할 것으로 예상된다.

탈착 등온식을 이용한 토양 중 인산 완충력 측정 (Measurement of Phosphorus Buffering Power in Various Soils using Desorption Isotherm)

  • 이진호;제임스 두리틀
    • 한국토양비료학회지
    • /
    • 제37권4호
    • /
    • pp.220-227
    • /
    • 2004
  • 인산은 식물 영양 물질과 환경 오염원으로 대비되는 불질이의로, 인산의 탈착 반응에 대한 연구는 농업과 환경에 관련된 토양 중에서 인산의 작용기작을 이해하기 위하여 필수적이다. 본 연구는 인산 탈착 유효량(Q)과 가용량(I)의 매개 변수($Q_{max}$$I_0$)와 관련된 인산 완충력을 측정하고, 그 매개 변수와 토양 특성간의 상관관계에 대한 특징을 조사하였다. 토양은 인산 무처리 표본과 $KH_2PO_4$ 용액을 사용하여 $100mg\;P\;kg^{-1}$의 농토를 처리한 표본을 이용하였다. 인산 탈착 Q/I 곡선은 음이온교환수지비즈법을 사용하여 얻었고, 실험 방정식 ($Q=aI^{-1}+bIn(I+1)+c$)을 이용하여 탈착 곡선을 설명하였다. 유효 인산 함량이 높은 토양 (${\g}20mg\;kg^{-1}$ of Olsen P)에서는 인산 처리 유무와 관계 없이 인산 탈착 Q/I 곡선은 특징적인 오목형 곡선 형태를 보였으나, 유효 인산 함량이 낮은 토양 (${\lt}20mg\;kg^{-1}$ of Olsen P)에서는 인산의 추가 처리 없이는 오목형 인산 탈착 Q/I 곡선을 얻을 수 없었다. 인산 추가 처리 시, 고형의 불안정 결합형 인산량$Q_{max}$)과 용액 내 인산량($I_0$)은 증가하였으나, $Q_{max}$$I_0$의 비율은 감소하였다. 그로 인하여, 인산의 완충력($|BP_0|$)을 나타내는 인산 탈차 Q/I 곡선의 경사가 감소하였다. 유효 인산 함량이 높은 토양 중 인산 무처러 표본의 인산 완충력($|BP_0|$)은 $48\;61L\;kg^{-1}$ 인산 추가 처리 표본의 인산 완충력은 $18\;44L\;kg^{-1}$ 사이에서 나타났으며, 실험에 사용된 모든 토양에 인산을 추가 처리한 후 나타난 인산 완충력은 $14\;79L\;kg^{-1}$ 사이에서 나타났으며, 또한 $Q_{max}$ 계수는 $71.4\;173.1mg\;P\;kg^{-1}$, $I_0$ 계수는 $0.98\;3.72mg\;P\;L^{-1}$ 사이에서 다양하게 나타났다. 인산 완충력을 지배하는 $Q_{max}$$I_0$, 계수는 토양 특성 중 하나의 특정 인자와 관련된 것으로는 볼 수 없었다. 그러나, 이들 계수는 토양 pH, 점토함량, 유기물함량 빛 석회함유 여부와 복잡하게 관련되어 있다. 또한, 토양으로부터 인산의 방출 활성은 처리된 인산의 천연 불안정 인산의 탈착성에 현저히 의존하였다.