• Journal of the Korean Society for Heat Treatment
• /
• v.25 no.5
• /
• pp.233-238
• /
• 2012

The effect of subzero treatment on the mechanical properties of cold rolled high manganese austenitic stainless steel was investagated. ${\alpha}$'-martensite was formed by cold rolling, and it was formed with surface relief and specific direction or crossing each other. The volume fraction of martensite increased by subzero treatment, and it was increased with longer time of subzero treatment and higher temperature of subzero treatment. The hardness and strength increased by subzero treatment, while the elongation decreased. With the increase of volume fraction of martensite, the hardness and strength was increased steeply with proportional relationship, elongation was decreased slowly. The results show that the hardness and strength was strongly controlled by the volume fraction of martensite, and the elongation was affected by transformation behavior of deformation induced martensite in the initial stage of deformation.

• Macromolecular Research
• /
• v.11 no.3
• /
• pp.189-193
• /
• 2003

pH- and temperature-sensitive bifunctional hydrogels composed of N-isopropylacrylamide (NiPAAm) and a sulfadimethoxine monomer (SDM) derived from sulfadimethoxine were prepared. These hydrogels exhibit simultaneous pH- and temperature-induced volume-phase transitions. The pH-induced volume-phase transition behavior is produced by the ionization/deionization of SDM and is very sharp. In the high pH region, the ionization of SDM induces swelling of the hydrogels. In the low pH region, the deionization of SDM induces deswelling of the hydrogels. The temperature-induced volume-phase transition behavior of the bifunctional hydrogels exhibits negative thermosensitivity because of the NiPAAm component. The hydrogels swell even at low pH as the temperature decreases. The hydrogels swell at low temperature and high pH, and deswell at high temperature and low pH. The volume of the hydrogels dependl on the balance of the swelling and deswelling produced by the two competing stimuli, pH and temperature.

• Journal of the Korea Safety Management & Science
• /
• v.12 no.4
• /
• pp.255-263
• /
• 2010

The research developes short-run standardized control charts(SSCC) and short-run acceptance control charts(SACC) under the various demand patterns. The demand patterns considered in this paper are three types such as high-variety and repetitive low-volume pattern, extremely-high-variety and nonrepetitive low-volume pattern, and high-variety and extremely-low-volume pattern. The short-run standardized control charts developed by extending the long-run ${\bar{x}}$-R, ${\bar{x}}$-s and I-MR charts have strengths for practioners to understand and use easily. Moreover, the short-range acceptance control charts developed in the study can be efficiently used through combining the functions of the inspection and control chart. The weighting schemes such as Shewhart, moving average (MA) and exponentially weighted moving average (EWMA) can be considered by the reliability of data sets. The two types according to the use of control chart are presented in the short-range standardized charts and acceptance control charts. Finally, process capability index(PCI) and process performance index(PPI) classified by the demand patterns are presented.

• Membrane Journal
• /
• v.29 no.4
• /
• pp.191-201
• /
• 2019

Before the commercialization of polymeric membranes applicable for industrial application, the homework remains for the high-performance polymers to overcome the practical challenge: long-term stability for prolonged service time. Polymers of intrinsic microporosity (PIMs), exhibiting exceptionally high fractional free volume and high permeability, are susceptible to physical aging where the extra volume created by the inefficient ladder-type packing will lead them from the volumetric equilibrium and reduce the free volume/permeability over time. Here, we will re-examine the physical aging of polymers of intrinsic microporosity, and discuss some of the most prominent attempts to mitigate physical aging in PIMs.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.753-756
• /
• 2008

HPFRCC (High-Performance Fiber Reinforced Cementitious Composites), which is relatively more ductile and has the characteristic of high toughness with high fiber volume fractions, can be used in structures subjected to extreme loads and exposed to durability problems. In the case of using PVA(polyvinyl alcohol) fibers, it is noted by former studies that around 2% fiber volume fractions contributes to the most effective performance at HPFRCC. In this study, therefore, compressive and flexural tests were implemented to evaluate the compressive and flexural capacities of HPFRCC while the total fiber volume fractions was fixed at 2% and two different PVA fibers were used with variable fiber volume fractions to control the micro-crack and macro-crack with short and long fibers, respectively. Moreover, specimens reinforced with steel and PVA fiber simultaneously were also tested to estimate their behavior and finally find out the optimized mixture. In the result of these experiments, the specimen consists of 1.6% short fibers (REC 15) and 0.4% long fiber (RF4000) outperformed other specimens. When a little steel fibers added to the mixture with 2% PVA fibers, the flexural capacity was increased, however, when high steel fiber volume fractions applied, the flexural capacity was decreased.

• Nuclear Engineering and Technology
• /
• v.54 no.1
• /
• pp.220-225
• /
• 2022

Perlite is one of the major constituents of the radioactive thermal insulation waste (RTIW) originating from nuclear power plants and, for proper waste management, a significant reduction in its volume is required prior to disposal. In this work, the volume reduction of perlite is studied by high-temperature treatment method with using K₂CO₃ as a flux. The perlite is ground with 0-30 wt% K₂CO₃, and differential thermal analysis/thermogravimetric analysis is used to monitor the glass transition temperature (T_g) and weight loss. The Tg varied between ~772.2 and 837.1 ℃ with the minima at ~643.5 ℃ with the addition of ~10 wt% K₂CO₃. It is observed that compared to the pure perlite the volume reduction ratio (VRR) increases with the addition of K₂CO₃. The VRR of 11.20 is observed with 5 wt% K₂CO₃ at 700 ℃, as compared to VRR of 5.56 without K₂CO₃ at 700 ℃. The X-ray photoelectron spectroscopy and scanning electron microscopy are used to characterize perlite samples heat-treated without/with 5 wt% K₂CO₃ at 700 ℃. Moreover, the atomic absorption spectroscopy indicates that the proposed heat-treatment procedure is able to completely retain the radionuclides present in the perlite RTIW.

• Journal of Korea Multimedia Society
• /
• v.10 no.3
• /
• pp.316-324
• /
• 2007

Maximum Intensity Projection (MIP) identifies patients' anatomical structures from MR or CT data sets. Recently, it becomes possible to generate MIP images with interactive speed by exploiting Graphics Processing Unit (GPU) even in large volume data sets. Generally, volume boundary plane is obliquely crossed with view-aligned texture plane in hardware-texture based volume rendering. Since the ray sampling distance is not increased at volume boundary in volume rendering, the aliasing problem occurs due to data loss. In this paper, we propose an efficient method to overcome this problem by Re-rendering volume boundary planes. Our method improves image quality to make dense distances between samples near volume boundary which is a high frequency area. Since it is only 6 clipping planes are additionally needed for Re-rendering, high quality rendering can be performed without sacrificing computational efficiency. Furthermore, our method couldbe applied to Minimum Intensity Projection (MinIP) volume rendering.

• Journal of Bio-Environment Control
• /
• v.31 no.4
• /
• pp.444-451
• /
• 2022

Recently, long-term cultivation is becoming more common with the increase in tomato hydroponics. In hydroponics, it is very important to supply an appropriate nutrient solution considering the nutrient and moisture requirements of crops, in terms of productivity, resource use, and environmental conservation. Since seasonal environmental changes appear severely in long-term cultivation, it is so critical to manage irrigation control considering these changes. Therefore, this study was carried out to investigate the effect of irrigation volume on growth and yield in tomato long-term cultivation using coir substrate. The irrigation volume was adjusted at 4 levels (high, medium high, medium low and low) by different irrigation frequency. Irrigation scheduling (frequency) was controlled based on solar radiation which measured by radiation sensor installed outside the greenhouse and performed whenever accumulated solar radiation energy reached set value. Set value of integrated solar radiation was changed by the growing season. The results revealed that the higher irrigation volume caused the higher drainage rate, which could prevent the EC of drainage from rising excessively. As the cultivation period elapsed, the EC of the drainage increased. And the lower irrigation volume supplied, the more the increase in EC of the drainage. Plant length was shorter in the low irrigation volume treatment compared to the other treatments. But irrigation volume did not affect the number of nodes and fruit clusters. The number of fruit settings was not significantly affected by the irrigation volume in general, but high irrigation volume significantly decreased fruit setting and yield of the 12-15th cluster developed during low temperature period. Blossom-end rot occurred early with a high incidence rate in the low irrigation volume treatment group. The highest weight fruits was obtained from the high irrigation treatment group, while the medium high treatment group had the highest total yield. As a result of the experiment, it could be confirmed the effect of irrigation amount on the nutrient and moisture stabilization in the root zone and yield, in addition to the importance of proper irrigation control when cultivating tomato plants hydroponically using coir substrate. Therefore, it is necessary to continue the research on this topic, as it is judged that the precise irrigation control algorithm based on root zone-information applied to the integrated environmental control system, will contribute to the improvement of crop productivity as well as the development of hydroponics control techniques.

• Journal of Preventive Medicine and Public Health
• /
• v.34 no.1
• /
• pp.9-20
• /
• 2001

Objectives : To explore the relationship between Percutaneous Transluminal Coronary Angioplasty(PTCA) volume and the associated immediate outcome. Methods : A total of 1,379 PTCAs were peformed in 25 hospitals in Korea between October 8 and December 31 in 1997. Data from 1,317 PTCAs (95.5%) were collected through medical record abstraction. Inter-observer reliability of the data was examined using the Kappa statistic on a subsample of 110 PTCA procedures from five hospitals. Intra-observer reliability of the data was also examined. PTCA success and immediate adverse outcomes were selected as the outcome variables. A successful PTCA was defined as a case that shows less than 50% diameter stenosis and more than 20% reduction of diameter stenosis. Immediate adverse outcomes included deaths during the same hospitalization, emergency coronary artery bypass graft (CABG) within 24 hours after PTCA, and acute myocardial infarction within 24 hours after PTCA. The numbers of PTCAs performed in 1997 per hospital were used as the volume variables. Results : Without adjusting for patient risk factors that may affect outcomes, procedures at high volume hospitals ($\geq200$ cases per year) had a greater success rate (P=0.001) than low volume hospitals. There was a marginally significant difference (P=0.070) in major adverse outcome rates between high and low volume hospitals. After adjusting for risk factors, there were significant differences in procedural failure and major adverse outcome rates between high and low volume hospitals. Conclusions : After adjusting for patient clinical risk factors, the hospital volume of PTCA was associated with immediate outcomes. It is recommended that a PTCA volume per year be established in order to improve the immediate outcome of this procedure in Korea.

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.4
• /
• pp.351-359
• /
• 2013

Blast furnace slag (BFS) have many advantages that are related to effective value improvement on applying to concrete while side effects of blast furnace slag also appear. Thus, research team conducted an experiment with high volume slag to see if the attribute of waste alkali accelerator for mixing rate, mixed use of NaOH and $Na_2SiO_3$, and early strength agent for mixing rate for replacement ratio and for the types of the stimulants in order to increase the use of blast furnace slag1s powder. As the result of the experiment, when it comes to compression strength, all of the alkali stimulants have been improved as the replacement rate increases except for sodium hydroxide. Among the alkali stimulants, sodium silicate was high on dynamic elastic modulus and absorption factor. In case of early strength agent, the mix of mixing 1.5% and blast furnace slag 75% have showed high strength enhancement. In event of Waste Alkali accelerator, it has showed different consequences for each experiment.