• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.248-249
• /
• 2008

ZnO (Zinc Oxide) thin film can be applied to various devices. Recently, ZnO film has been promoted in transparent TFTs (thin film transistors) because of high transparency and low temperature process. In this paper, ZnO thin films were grown on glass with the three conditions of RF sputtering power, which are 50W, 75W, 100W. Their structural, electrical and optical properties were investigated by using XRD, UV-Visible spectrometer and 4-point probes. In the ZnO film with 50W process, good crystallinity, high transmittance, and high sheet resistance were shown. In conclusion, the ZnO film with 50W can be an optimal channel layer of TFTs.

• 한국정밀공학회지
• /
• 제30권3호
• /
• pp.340-348
• /
• 2013

In Projection Stereolithography Apparatus (PSLA), Digital Micromirror Device (DMD) and Liquid Crystal Display (LCD) are used as a beam pattern generator. The DMD shows high resolution, but it is mostly applied in micro stereolithography due to high cost and fabricable area. In LCD, the size of pattern beam is freely controlled due to various panel sizes. The LCD, however, has some limitations such as short life time by the high power light source, non-uniform light intensity of pattern beam and low transmittance of UV-light. To solve these problems in LCD-based PSLA, a Scanbeam-SLA with LCD of 19 inches and visible LED-array is developed. In this system, the light module works like a scanner for uniform illumination. The system configuration, working principle and fabrication examples are addressed in this study.

• 한국세라믹학회지
• /
• 제46권4호
• /
• pp.379-384
• /
• 2009

Zirconia is widely used for structural materials in machinery due to its superior properties, such as high strength, high hardness, and high toughness. Zirconia generally has ivory or white color. Therefore many studies are performed for diversification of zirconia color, in order to be widely uitilized for decoration and machine parts which need distincfive color. In this study, graphite is used to prevent structural defect, to maintain superior properties, and to develop black color of zirconia by impregnation method. As specimen was impregnated at $1600^{\circ}C$ for 2 h, bending strength is 1221 MPa, density is $6.01\;g/cm^3$, hardness is 10.1 GPa, absorption coefficient is 0%, transmittance is Fail, chromaticity is 54. The results indicate that black zirconia has enough properties to be adopted as mechanical parts. Optimum impregnation time is 2 h for various observations.

• Transactions on Electrical and Electronic Materials
• /
• 제8권5호
• /
• pp.215-217
• /
• 2007

Recently, color reproduction properties have attracted lots of attention with mass production of LCD especially corresponding to TV application and achievement of color reproduction properties such as CRT have been considered one of technical goals for high quality display. However, revision of the color reproduction properties only with CF(color filter) have fundamental limitations and resultant decrease in the transmittance of panel causes demand on high brightness of BL(Back Light). In this paper, we present such a method in which by optimization of original light spectrum from the BL source will improves the color reproduction properties corresponding to them of the CRT. When the intensity of RED and Green-Blue from ramp is revised densely, the characteristics different from CCFL(Cold Cathode Fluorescent Lamp) used before become added so that about 11 % of the color reproduction properties is improved compare to the existing LCD panel.

• 한국전기전자재료학회논문지
• /
• 제27권1호
• /
• pp.61-69
• /
• 2014

In this paper, we have researched semiconductor optical filters to solve the problem of the high failure rate that are recognize bad of financial account, jam of financial account and the ATM service interruption due to failure of accurate location information among the operation of the ATM (automatic teller machine) systems. A semiconductor optical filters that have high resolution and less diffuse, high transmittance are able to detect the information of financial account surface accurately. Therefore, it is a stable filter that is able to minimize the incidence of disability. In this paper, we drew the determinants by element for implement an excellent semiconductor optical filters. Based on this, we had to be able to implement the semiconductor optical filter that is able to be mounted on the actual ATM system through future studies.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 춘계학술대회 논문집
• /
• pp.10-11
• /
• 2008

We developed the equipment palpating cell proliferation using a high brightness LED. This equipment was fabricated using a micro-controller and a high brightness LED, and designed to enable us to control light irradiation time, intensity, frequency and so on. Especially, to control the light irradiation frequency, FPGA was used, and to control the change of output value, TLC5941 was used. Control stage is divided into 30 levels by program. Consequently, the current value could be controlled by the change of level in Continue Wave(CW) and Pulse Width Modulation(PWM), and the output of a high brightness LED could be controlled stage by stage. And then, each experiment was performed to irradiation group and non-irradiation group for bone marrow cells. MIT assay method was chosen to verify the cell increase of two groups and the effect of irradiation on cell proliferation was examined by measuring 590nm transmittance of ELISA reader. As a result, the cell increase of bone marrow cells was verified in irradiation group as compared to non-irradiation group.

• 반도체디스플레이기술학회지
• /
• 제18권2호
• /
• pp.48-52
• /
• 2019

Virtual metrology, which is one of APC techniques, is a method to predict characteristics of manufactured films using machine learning with saving time and resources. As the photoresist is no longer a mask material for use in high aspect ratios as the CD is reduced, hard mask is introduced to solve such problems. Among many types of hard mask materials, amorphous carbon layer(ACL) is widely investigated due to its advantages of high etch selectivity than conventional photoresist, high optical transmittance, easy deposition process, and removability by oxygen plasma. In this study, VM using different machine learning algorithms is applied to predict the thickness of ACL and trained models are evaluated which model shows best prediction performance. ACL specimens are deposited by plasma enhanced chemical vapor deposition(PECVD) with four different process parameters(Pressure, RF power, $C_3H_6$ gas flow, $N_2$ gas flow). Gradient boosting regression(GBR) algorithm, random forest regression(RFR) algorithm, and neural network(NN) are selected for modeling. The model using gradient boosting algorithm shows most proper performance with higher R-squared value. A model for predicting the thickness of the ACL film within the abovementioned conditions has been successfully constructed.

• Current Photovoltaic Research
• /
• 제11권1호
• /
• pp.13-17
• /
• 2023

Functional transparent electrode was achieved by metal oxide-metal-Metal oxide (OMO) structure. Tailoring of metal oxide and metal layers, optically transparent and electrically excellent OMO films were investigated. Silver (Ag) is adopted for the metal layer and Ag oxide (AgO) is reactively formed by flowing O₂ gas during the sputtering process. This spontaneous AgO formation from Ag simultaneously provides the good electrical interface with high transparency. Due to the feature of transparent electrode of OMO, it endows the shielding effect (SE) function of electromagnetic interference. Optically transparent and electrically conductive OMO electrode shows the high transmittance (83.7%) and low sheet resistance (6.5 Ω/☐) with SE of 29.54 dB.

• 한국수소및신에너지학회논문집
• /
• 제31권2호
• /
• pp.177-183
• /
• 2020

To utilize hydrogen energy, high-yield, high-purity hydrogen needs to be produced; therefore, hydrogen separation membrane studies are being conducted. The membrane reactor that fabricates hydrogen needs to have high hydrogen permeability, selective permeability, heatresistant and a stable mechanical membrane. Dense membranes of Pd and Pd alloys are usually used, but these have drawbacks associated with high cost and durability. Therefore, many researchers have studied replacing Pd and Pd alloys. Dense TiN membrane is highly selective and can separate high-purity hydrogen. The porous alumina has a high permeation rate but low selectivity; therefore, separating high-purity hydrogen is difficult. To overcome this drawback, the two materials are combined as composite reclamations to produce a separation membrane with a high penetration rate and high selectivity. Accordingly, TiN-alumina was manufactured using a high-energy ball mill. The TiN-alumina membrane was characterized by X-ray diffraction analysis, scanning electron microscopy, and energy dispersive spectroscopy. The hydrogen permeability of the TiN-alumina membrane was estimated by a Sievert-type hydrogen permeation membrane apparatus. Due to the change in the diffusion mechanism, the transmittance value was lower than that of the general TiN ceramic separator.

• 한국안광학회지
• /
• 제15권1호
• /
• pp.55-60
• /
• 2010

목적: 플라스틱렌즈 표면의 코팅막을 식각한 렌즈와 무코팅렌즈를 비교함으로써, 코팅의 식각이 렌즈에 미치는 변화를 연구하였다. 방법: 굴절력이 0 디옵터인 CR-39, 중굴절률, 고굴절률렌즈를 코팅제거제를 사용하여 $80^{\circ}C$와 상온에서 식각하였고, 굴절력, 투과율 및 렌즈 표면의 변화를 조사하였다. 결과: 코팅의 식각으로 렌즈의 굴절력의 변화는 없었으며, 무코팅렌즈와 식각된 렌즈의 광투과율도 거의 차이가 없었다. 식각속도는 CR-39와 중굴절률렌즈에서 비슷하였으나 고굴절률렌즈에서는 느리고, 불규칙하였다. 렌즈 미세 표면을 관찰한 결과 렌즈 표면에 식각으로 인한 손상이 나타났는데, 중굴절률렌즈의 손상이 가장 적었고, 고굴절률렌즈에서 가장 많았다. 결론: 안경렌즈 표면이 손상되지 않도록 코팅막을 식각하려면, 렌즈 소재에 맞는 적합한 코팅제거제가 사용되어야 하며, 적절한 식각조건에 대한 주의가 필요할 것이다.