• Title/Summary/Keyword: high tolerance

Search Result 1,597, Processing Time 0.028 seconds

Factors Affecting the Recovery of Pilots +Gz Tolerance

  • Park, Myunghwan;Jee, Cheolkyu;Kim, Cheonyoung;Seol, Hyeonju
    • Journal of the Ergonomics Society of Korea
    • /
    • v.36 no.5
    • /
    • pp.535-543
    • /
    • 2017
  • Objective: This study was designed to identify factors affecting pilots' +Gz tolerance recovery from +Gz induced exhaustion. Background: +Gz tolerance of pilots has been considered as a crucial factor to fly the modern high performance fighter aircrafts. However, the factors affecting pilots' G-tolerance recovery from +Gz induced exhaustion have not been examined in the acceleration research community. Method: A centrifuge profile consisting of a high +Gz run for pilot's exhaustion and a low +Gz run for pilot's recovery and another high +Gz runs for pilot's second exhaustion was designed. The subjects' +Gz tolerance recovery ratio was measured by ratio of second high +Gz run time to the first high +Gz run time. The subjects' +Gz tolerance recovery rate was measured by dividing the subjects' +Gz tolerance recovery ratio by the low +Gz run time. The subjects' G-tolerance recovery rate was analyzed with respect to the subjects' personal factors including subjects' anthropometric and physiologic characteristics, flight time, flying aircraft type and so on. Results: The subjects' previous three-month flight hours (r=-0.336, p=0.039), six-month flight hours (r=-0.403, p=0.012) and one-year flight hours (r=-0.329, p= 0.044) correlated with the subjects' G-tolerance recovery rate. Conclusion: The subjects' G-tolerance recovery rate is clearly related to the subjects' previous flight hours. However, the subjects' anthropometric and physiologic characteristics do not show any statistically significant correlation with the subjects' G-tolerance recovery rate. Application: This research provides a safety critical insight to aviation community by identifying the factors to affect the gravity-induced loss of consciousness (GLOC) of pilots.

Studies of Physiological Response to the Salt Tolerance of Rice Cultivars (염류 스트레스에 대한 수도품종의 생리적 반응에 대한 연구)

  • 조동하
    • Korean Journal of Plant Resources
    • /
    • v.11 no.1
    • /
    • pp.93-100
    • /
    • 1998
  • This study was to investigate the dry weight, the amount of Na+ and K+ water potential and leaf photosynthesis rate in plants for determining the salt tolerance mechanism in rice cultivars on soil and solution culture with NaCl. The results obtained in this study are summarized as follows ; In general, rice cultivars, cv. Tetep and Jinbu, having high salt tolerance in ID(identified on dry matter production level) showed the higher salt tolerance in RGR (relative growth rate), compared with rice cultivars(cv. Nonglim 41ho, Dunraebyeo and Sobackbyeo) having low salt tolerance. The contents of Na in rice differed depending on culivars and plant parts. Tetep contained 2.9times higher amounts of Na+ than leaf blade and root part. High salt tolerance cultivar Obongbyeo showed a larger decrease in osmotic potential than low salt tolerance cultivar Dunraebyeo suggesting that osmotic adjustment was developed under salt stress conditions in a salt tolerant cultivar . In order to know the IY(identified on grain yeild level using rice cultivars having different salt tolerance the capacity of photosyntheiss was investigated. The capapcity of photosynthesis in cv. Tetep and Obongbyeo having high salt tolerance was much higher that in cv.Dunraebyeo and Nonglim 41 having low salt tolerance.

  • PDF

Tolerance Design for Multiple Performance Characteristics (다수 성능특성치의 허용차설계)

  • Byun, Jai-Hyun
    • Journal of Korean Institute of Industrial Engineers
    • /
    • v.20 no.4
    • /
    • pp.99-111
    • /
    • 1994
  • Toguchi method is a systematic technique for designing high quality product at low cost. There are three steps in the Toguchi method, 1)system design, 2)parameter design, and 3)tolerance design. This paper considers the tolerance design for multiple performance characteristics which is practically important. We present two tolerance design procedures : grade selection and tolerance determining procedures. In grade selection procedure a scheme is presented that minimizes the sum of the price of low-level characteristics and the expected loss due to the variations of high-level characteristics. In tolerance determining procedure we determine the tolerances of the low-level characteristics.

  • PDF

Cold Tolerance Characteristic Test of High Yield Tongil-type Rice Breeding Lines for Processing

  • Kang-Su Kwak;Sea-Kwan Oh;Kuk-Hyun Jung;Dae-Ha Seo
    • Proceedings of the Korean Society of Crop Science Conference
    • /
    • 2022.10a
    • /
    • pp.278-278
    • /
    • 2022
  • Recently, the yield potential of high yield Tongil-type rice varieties has greatly increased, reaching 817kg/10a(Geumgang No.1). Moreover, in order to promote rice consumption and strengthen the competitiveness of the rice processing industry, the R&D of high yield Tongil-type rice varieties for each processing purpose, such as rice noodles, grain feed and industrial materials, has been continuously carried out. However, because Tongil-type rice varieties or lines are generally very vulnerable to cold damage, cold tolerance test can be said to be absolutely necessary to improve the cultivation safety. This study is the result of the seedling and field cold tolerance characteristic tests carried out in 2021 of high yield Tongil-type rice breeding lines. For the cold tolerance characteristic test of seedlings, total 303 high yield rice breeding lines for processing were treated in cold water of 13℃ and irrigation depth of 4cm for 10 days from the third-leaf age, then it was evaluated by comparing the degree of discoloration and withering with the checked varieties(Boramchan, Hanahreum No.2). Also, for the test of field, total 186 high yield rice breeding lines for processing were treated in cold water of 17℃ by keeping pouring day and night from 30 days after transplanting to ripening stage, then it was evaluated by comparing the degree of discoloration, delay of heading, shortening rate of stem length and percent of fertile grain etc. with the checked varieties. And the cold tolerance evaluative criteria were classified as strong(1~3), medium(4~6) and weak(7~9) in overall cold tolerance. (Seedling test) As for the degree of cold tolerance of the check variety, 'Boramchan' and 'Hanahreum No.2' showed a response of 'medium' and 'weak', respectively. However, there was no 'strong' line in the high yield rice breeding lines, 2 lines showed a 'medium' response, and 301 lines showed a 'weak' response. Therefore, except for a few lines(0.7%), most lines(99.3%) showed a 'weak' response. (Field test) In terms of the overall cold tolerance of the check variety, both 'Boramchan' and 'Hanahreum No.2' showed a 'medium' response. Similarly, there was no 'strong' line in the case of high yield rice breeding lines, 20 lines showed a 'medium' response, and 166 lines showed a 'weak' response. Therefore, except for some(10.8%) lines, most(89.2%) lines showed a 'weak' response. From the above results, we selected about 100 individuals with less seed shattering and degeneration of the ear tip, and with a relatively high percent of fertile grain, and are continuing to select lines with improved cold tolerance in the F4~F5 group in this year. As such, most of the Tongil-type rice varieties have poor cold tolerance and thus have low cultivation safety at low temperatures. However, it is important to select improved lines through generational progress because there are some lines that still have a certain level of cold tolerance among them.

  • PDF

Design Tolerance of High Speed Spindle considering the Variation of Ball Contact Angle in the Angular Contact Ball Bearings (고속 주축베어링의 볼 접촉각 변동을 고려한 주축 설계공차)

  • Lee, Chan-Hong
    • Journal of the Korean Society of Manufacturing Technology Engineers
    • /
    • v.19 no.5
    • /
    • pp.609-615
    • /
    • 2010
  • Angular contact ball bearings in a high speed spindles are under the extreme conditions, such as high temperature, big centrifugal force and thrust cutting forces. So, the assembly contacts between spindle shaft and inner ring bearings, bearing housing and outer ring of bearings are occasionally unstable at high speed revolution. Furthermore, the ball contact angle of a bearing, which influence stiffness and lifetime of bearings, are changed according to loads and rotational speed. To analyze internal forces of a bearing under high speed revolution, the ball contact are calculated using nonlinear equations in consideration of rotational speed, thrust loads and raceway form. Diameter increase of inner and outer ring by influence factors, such as internal forces to inner and outer ring, centrifugal force and temperature of inner and outer rings are calculated to establish stable state in bearing assembly in high speed spindle. Finally, contribution ratio of influence factor to assembly design tolerance of inner and outer rings are shown and the stable assembly design tolerance are proposed.

Selective Homologous Expression of Recombinant Manganese Peroxidase Isozyme of Salt-Tolerant White-Rot Fungus Phlebia sp. MG-60, and Its Salt-Tolerance and Thermostability

  • Kamei, Ichiro;Tomitaka, Nana;Motoda, Taichi;Yamasaki, Yumi
    • Journal of Microbiology and Biotechnology
    • /
    • v.32 no.2
    • /
    • pp.248-255
    • /
    • 2022
  • Phlebia sp. MG-60 is the salt-tolerant, white-rot fungus which was isolated from a mangrove forest. This fungus expresses three kinds of manganese peroxidase (MGMnP) isozymes, MGMnP1, MGMnP2 and MGMnP3 in low nitrogen medium (LNM) or LNM containing NaCl. To date, there have been no reports on the biochemical salt-tolerance of these MnP isozymes due to the difficulty of purification. In present study, we established forced expression transformants of these three types of MnP isozymes. In addition, the fact that this fungus hardly produces native MnP in a high-nitrogen medium (HNM) was used to perform isozyme-selective expression and simple purification in HNM. The resulting MGMnPs showed high tolerance for NaCl compared with the MnP of Phanerochaete chrysosporium. It was worth noting that high concentration of NaCl (over 200 mM to 1200 mM) can enhance the activity of MGMnP1. Additionally, MGMnP1 showed relatively high thermo tolerance compared with other isozymes. MGMnPs may have evolved to adapt to chloride-rich environments, mangrove forest.

Tolerance Intervals for Expected Time at the Given Reliability and Confidence Level (신뢰도와 신뢰수준을 고려한 기대수명 공차구간 설정에 관한 연구)

  • Choi Sung woon
    • Journal of the Korea Safety Management & Science
    • /
    • v.7 no.2
    • /
    • pp.73-83
    • /
    • 2005
  • This paper is to propose tolerance intervals for expected time at the given reliability and confidence level for continuous and discrete reliability model. We consider guaranteed - coverage tolerance intervals, that is, reliability - confidence level tolerance intervals. These proposed methodologies can be applied to any industrial application where the customer's operating specification require a high level of reliability.

The Study of the Changes of Obesity-Relating Biomarkers in High Fat Fed-Induced C57BL/6 Mice (고지방 식이로 비만이 유도된 C57BL/6 마우스에서 식이 기간에 따른 비만 관련 지표 변화에 대한 연구)

  • Song, Mi-Young
    • Journal of Korean Medicine for Obesity Research
    • /
    • v.16 no.1
    • /
    • pp.19-26
    • /
    • 2016
  • Objectives: The prevalence of obesity continues rise and obesity and metabolic syndrome is a major problem in global health care. Animal models are used in the drug discovery of novel treatment for obesity. One of common models of obesity is a high fat diet induced obesity in a C5BL/6 mouse, and the development of obesity and glucose tolerance in mouse model is different according to period of diet. Therefore, this study was performed to observe the development of obesity and glucose tolerance during a high fat diet (HFD). Methods: Male C57BL/6 mice, 5 weeks of age, were fed on a standard chow diet as a normal diet (18 kcal% fat) or a HFD (60 kcal% fat) for up to 16 weeks. The various factors related with obesity and insulin resistance were measured at 8, 12, and 16 weeks. Results: The weights of body and epididymal fat were gradually increased for 8~16 weeks, however the change of hyperglycaemia and glucose tolerance have shown different with that of body weight. Blood glucose, oral glucose tolerance and insulin tolerance were increased more clearly at week 12 and 16 than week 8. Lipid accumulation of liver and body temperature were also significantly increased at week 16, compared with normal group. Conclusions: The developments of obesity and related factors were different by a HFD period in a C57BL/6 obese mice. This result suggests that the development of obesity with glucose tolerance and liver lipid may induce clearly by a HFD for 16 weeks.

Prediction of Dynamic Characteristics of Rubber Mount far Anti-Vibration Considering the Dimensional Tolerance (치수공차가 고려된 방진마운트의 동특성 예측)

  • 김국원;김남웅
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 2002.05a
    • /
    • pp.829-832
    • /
    • 2002
  • With the increase of storage density, high rotational speed and high access technologies in optical disk drive, mechanical issues, mainly noise and vibration, become critical. Up to now the researches of rubber mount for anti-vibration focused on how to calculate the static and the dynamic stiffness of rubber mount and leaved out of consideration of the dimensional tolerance of rubber mount for anti-vibration. This paper presents the effects of dimensional tolerance of rubber mount for anti-vibration on the dynamic characteristics of optical disk drive by finite element analysis and dynamic test. The relation between dimensional tolerance and dynamic characteristics of optical disk drive is observed and discussed.

  • PDF

A Study on the Design of Rubber Mount for Anti-vibration of an Optical Disk Drive Considering the Dimensional Tolerance (치수공차가 고려된 광디스크 드라이브의 방진마운트 설계에 관한 연구)

  • 김국원;김남웅
    • Transactions of the Korean Society for Noise and Vibration Engineering
    • /
    • v.12 no.9
    • /
    • pp.661-667
    • /
    • 2002
  • With the increase of storage density, high rotational speed and high access technologies in optical disk drive, mechanical issues, mainly noise and vibration, become critical. Up to now the researches of rubber mount for anti-vibration focused on how to calculate the static and the dynamic stiffness of rubber mount and loaned out consideration of the dimensional tolerance of rubber mount for anti-vibration. This paper presents the effects of dimensional tolerance of rubber mount for anti-nitration on the dynamic characteristics of optical disk drive by finite element analysis and dynamic test. The relation between dimensional tolerance and dynamic characteristics of optical disk drive is observed and discussed.