• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 춘계 학술논문 발표대회
• /
• pp.53-54
• /
• 2015

This study is conducted to investigate the characteristics of cracks depending on the different mixture rates of calcium hydroxide and distilled water in high-strength concrete, which is substituted with a high percentage of blast-furnace slag, by using specimens produced under different heating temperatures: 600℃, 800℃, and 1000℃, respectively. According to the results of the study, the specimen heated under the temperature of 600℃ did not produce cracks; the specimen heated under 800℃ produced little cracks and showed no difference between calcium hydroxide and distilled water; whereas the specimen heated under 1000℃ produced cracks larger than 5mm on average in the case of calcium hydroxide, compared to distilled water.

• 한국물환경학회지
• /
• 제36권5호
• /
• pp.392-404
• /
• 2020

The focus of this study was to quantify the thermal stratification and analyze the relationship between the stratification structure and the tributaries to understand flow variations in the Paldang Reservoir. The vertical distribution of the temperature and density gradients, and the depth and thickness of the thermocline were quantitatively calculated using a lake physics tool (rLakeAnalyzer) and high-frequency monitoring data. Based on a density gradient of 0.2 kg/㎥/m, the thermocline was formed from mid-May to early-September 2019 and the other periods were weakly stratified or mixed. The thickness of the thermocline was developed until 4.7 m and the depth of the thermocline was formed at a depth of 3 - 6 m at the front of the Paldang Reservoir. During the formation of the thermocline, the Namhangang and Gyeongancheon tributaries with relatively high water temperature (low-density) flowed into the upper layer of the reservoir, and the Bukhangang tributary with low water temperature (high-density) mainly affected the lower layer of the reservoir. This is because the density currents were formed due to the difference in the water temperature of the tributaries. The findings of this study may be used for constructing high-frequency monitoring and quantitative data analyses of reservoirs.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 추계 학술논문 발표대회
• /
• pp.119-120
• /
• 2011

Recently, the effects of high temperature and fiber content on the residual mechnical properties of high-strength concrete were experimentally investigated. In this paper, residual mechanical properties of concrete with water to cement (w/c) ratios of 55%, 42% and 32% exposed to high temperature are compared with those obtained in fiber reinforced concretes of similar characteristics with the ranging of 0,05% to 0,20% polypropylene (PP) fibers by volume of concrete, and considered factors include pre-load levels (20% and 40% of the maximum load at room temperature). Outbreak time and water contents were tested and were determined the compressive strength. In the result, it is showed that to prevent the explosive spalling of 50MPa grade concretes exposed to high temperature need more than 0.05Vol.% PP fibers. Also, the cross-sectional area of PP fiber can influence on the residual mechanical properties and the spalling tendency of fiber reinforced concrete exposed to high temperature. Especially, the external loading increases not only the residual mechanical properties of concrete but also the risk of spalling and the brittle tendency.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.395-395
• /
• 2008

Water-assisted synthesis of carbon nanotubes (CNTs) has been intensively studied in recent years, reporting that water vapor enhances the activity and lifetime of metal catalyst for the CNT growth. While most of these studies has been focused on the supergrowth of CNTs at high temperature, rarely has the similar approach been made for the CNT synthesis at low temperature. Since the metal catalyst are much less active at lower temperature, we expect that the addition of water vapor may increase the activity of catalyst more largely at lower temperature. We synthesized multi-walled CNTs at temperature as low as $360^{\circ}C$ by introducing water vapor during growth. The water addition caused CNTs to grow ~3 times faster. Moreover, the water-assisted growth prolonged the termination of CNT growth, implying the enhancement of catalyst lifetime. In general, a thinner catalyst layer is likely to produce smaller-diameter, longer CNTs. In a similar manner, the water vapor had a greater effect on the growth of CNTs for a smaller thickness of catalyst in this study. To figure out the role of process gases, CNTs were grown in the first stage and then exposed to each of process gases in the second stage. It was shown that water vapor and hydrogen did not etch CNTs while acetylene led to the additional growth of CNTs even faster in the second stage. As-grown CNTs were characterized by scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), atomic force microscopy (AFM), and Raman spectroscopy.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제34회 추계학술대회 개최
• /
• pp.59-62
• /
• 2001

Flow induced vibration in steam generators has caused dynamic interactions between tubes and contacting materials resulting in fretting wear . Series of experiments have been performed to examine the wear properties of Inconel 690 steam generator tubes in various environmental conditions. For the present study, the test rig was designed to examine the fretting wear and rolling wear properties in high temperature(room temperature - 290。C) water. The test was performed at constant applied load and sliding distance to investigate the effect of test temperature on wear properties of the steam generator tube materials. To investigate the wear mechanism of material, the worn was observed using scanning electron microscopy. The weight loss increase at higher test temperature was caused by the decrease of water viscosity and the mechanical property change of tube material. The mechanical property changes of steam generator tube material, such as decrease of hardness or yield stress in the high temperature tests. From the SEM observation of worn surfaces, the severe wear scars were observed in specimens tested at the higher temperature.

• 대한기계학회논문집B
• /
• 제28권3호
• /
• pp.247-255
• /
• 2004

The cooling characteristic of water-air mixed spray for high water mass flux is not well defined, compared to that of highly pressurized spray. A series of research program was planned to develop the boiling correlation for whole temperature range in case of water-air mixed spray with high water mass flux. The cooling experiments of hot steel surface with initial temperature of 820$^{\circ}C$ were conducted in unsteady state with relatively high water mass flux. A computer program was developed to calculate the heat flux inversely from measured data by three inserted thermocouples. Finally the effects of water and air mass flux on the averaged film boiling heat flux and wetting temperature were studied. In this 1st report, it is found that the boiling curve was similar to that of highly pressurized spray and the decreased slope of heat flux in film boiling region with respect to surface temperature became steep by increasing air mass flux. Also it is shown that, by increasing air mass flux, the averaged heat flux in film boiling region was increased, and then saturated and the wetting temperature was increased, and then decreased. Finally when the heat flux in film boiling region is compared with that of highly pressurized spray, it is known that the cooling is improved by introducing air up to 60%.

• 한국환경보건학회지
• /
• 제10권1호
• /
• pp.1-12
• /
• 1984

The stochastic characteristics of the daily range of water temperature variation was analyzed by employing the techniques of autocorrelation coefficient, autoreggresive model and crosscorrelation model. These time series included daily observations on maximum and minimum values of water temperature and air temperature. The measurement was made by automatic recording instrument at Gu-yee and Dook-do in Han River, and at Waegwan and Gu-mi in Nackdong River in 1981. As a result of this study, it was found that (1) The correlogram of daily water temperature ranges $\Delta AT_i$ and daily air temperature $\Delta AT_i$ at Gu-mi and Gu-yee showed the exponential curves. (2) The most high frequency values of $\Delta AT_i$ and $\Delta WT_i$ were 11$\circ$C and 0.5${\circ}C$ respectively at every measuring site. (3) The correlation coefficients between the daily mean air temperature AT$_i$ and the daily mean water temperature were fairly high as 0.966 at Dook-do and 0.949 at Gu-yee, but the correlation coefficients between $\Delta AT_i$ and $\Delta WT_i$ were very low as 0.1074 at Gu-yee and 0.0324 at Dook-Do.

• 한국약용작물학회지
• /
• 제26권3호
• /
• pp.233-239
• /
• 2018

Background: Inflammation plays an important role in various diseases, including ulcerative colitis, Behcet's disease, and rheumatoid arthritis. In this study, we investigated the anti-inflammatory effects of Morus alba L. extracts obtained using different extraction methods (water extraction or high temperature extraction) on RAW264.7 cells. Methods and Results: Extracts from the central part (including the heartwood, sapwood, cambiun, and phloem) and bark (including the periderm and cortex) of Morus alba L. were obtained using either water or high temperature extraction. The following extract were obtained: MA1, water extract from the central part of Morus alba L., MA2, high temperature extract from the central part of Morus alba L., MA3, water extract from the bark of Morus alba L., and MA4, high temperature extract from the bark of Morus alba L. None of these extracts was observed to be cytotoxic to RAW264.7 cells. The MA2 extract reduced the production of LPS-induced NO (nitric oxide), $PGE_2$ (prostaglandin $E_2$), $TNF-{\alpha}$, IL-6, and $IL-1{\beta}$ production in LPS-stimulated RAW264.7 cells. Conclusions: These results indicated that the inflammatory response was moderated by MA2. Treatment with MA2 could be used as a natural medicine for treating diseases involving inflammation. However, further experiments are required to determine how the high temperature extraction method alters the active ingredients in the extract and influences the anti-inflammatory effects of Morus alba L..

• 한국가금학회지
• /
• 제22권3호
• /
• pp.133-144
• /
• 1995

One metabolism trial(Experiment I) and another respiration trial(Experiment II) were conducted to investigate the effects of dietary fiber supplementation(20% wheat bran) on the water balance, blood acid-base balance, body temperature, and metabolic rate of heat-stressed adult roosters. In Experiment I, twenty 20-wk-old SCWL roosters(BW 1.6 kg) were randomly alloted to 4 treatments with 5 birds per treatment and one per replicate. The 4 treatments were consisted of two temperature(21~22˚C vs. 34~35˚C) and two dietary fiber treatment(0% and 20% wheat bran), making Experiment I a 2x2 factorial. After 4 d of preliminary period, birds we subjected to 3-d collection period. Sixteen 20-wk-old SCWL roosters(BW 1.6 kg) were employed Experiment H, with two temperature(21~22˚C vs. 34~35˚C) and two wheat bran levels(0% and 20%). Brids were housed in individual metabolism cages under normal temperature(21~22˚C), at fed one of the experimental diet. After 4 d of preliminary period, a respiration trial with open-circuit gravimetric respiratory apparatus was carried out for each bird for 6 h, one by one, normal(20~21˚C) and hot(34~35˚C) temperatures. The ANOVA test and comparisons among treatment means were done at 5% probability level for both experiments. Results obtained from Experiment I and, II were summarized as follows, 1.The amounts of DM intake and excretion were significantly(P<.05) decreased by heat stress. The DM intake was not affected by the addition of 20% wheat bran, however, the amount of DM excretion was significantly increased by the high fiber diet. Thus, the DM metabolizability decreased significantly by the addition of 20% wheat bran. 2. The heat-stressed roosters increased the water intake and excreta moisture content significantly. Although not significant, the water intake tended to increase in roosters fed the 20% wheat bran diet. 3. The amounts of total water input and evaporative water loss were increased significantly by heat stress, and the addition of 20% wheat bran did not exert any influence on the total water input and evaporative water loss. However, roosters fed the 20% wheat bran diet increased the excreta water output significantly. 4. Neither the heat stress nor the dietary fiber did affect the blood pH, pCO2, and HCO$_3$- significantly. 5. The body temperature increased significantly by the heat stress. However, the high fiber deit failed to decrease the body temperature. 6. The heat-stressed roosters decreased the 02 consumption and C0$_2$ production, and increased the evaporative water loss significantly. However, the high fiber diet did not exert any infulence in this regard. It appears that the beneficial effect, if any, of high fibrous diet during heat stress episode may be due to the increased heat loss through the enhanced excreta water.

• 한국식물병리학회지
• /
• 제10권1호
• /
• pp.34-38
• /
• 1994

Effect of temperature, relative humidity (RH) and free water period on anthracnose development by Colletotrichum gloeosporioides was examined on red pepper fruits. Mycelial growth of C. gloeosporioides was best at 28$^{\circ}C$, but greatly retarded at 32$^{\circ}C$. Minimum inoculum density required for lesion development varied with isolates, but was mostly above 1.0$\times$105 conidia/ml. Optimum temperature for lesion development on fruits was 31$^{\circ}C$. Percentage of lesion development was decreased as incubation temperature decreased. similar trend of temperature response was observed for acervulus formation on the developed lesions. Acervuli were not developed on the lesion as low as at 19$^{\circ}C$. Lesion development and acervuli formation tended to increase as increasing RH, but were greatly inhibited at the RH lower than 88%. More than 2 hours of free water period after inoculation were required for lesion development. Lesion development was increased as free water period increased. This study indicates that anthracnose development by C. gloeosporioides favors the conditions of high temperature above 28$^{\circ}C$, high humidity above 90% RH, and requires free water period longer than 2 hours.