• 한국수산과학회지
• /
• 제54권6호
• /
• pp.948-953
• /
• 2021

To find the optimal eggs to larvae transforming temperature of walleye pollock Theragra chalcogramma, we investigated their hatching pattern, mortality, and larval deformities. Results showed that the hatching quality decreased as the water temperature increased and dropped sharply above 13℃. The highest hatching rate was achieved at 7℃, whereas the lowest was at 15℃. Dead eggs were not observed at 7℃; however, dead egg ratios were significantly high at 4.5℃ and above 13℃ (P<0.05). Mortality of larvae after hatching was not observed at 4.5℃, but was significantly high above 13℃. The DNA content of the larvae did not show any significant difference at all water temperatures; however, RNA content was the highest at 7℃ and was significantly low above 11℃. In addition, RNA/DNA ratio was the highest at 7℃. Larval deformities after hatching were low at 7-11℃ and higher at higher or lower water temperature. Therefore, the hatching index and larval health index of Walleye pollock eggs in this study show that 7℃ to 11℃ seems to be the optimal transforming water temperature range.

• ALGAE
• /
• 제17권2호
• /
• pp.117-125
• /
• 2002

Five microalgal species isolated from the Jeju coast and four microalgal stock strains in hatchery were cultured in order to investigate their adapation to extreme changes in environmental factors such as salinity, water temperatue, adn nutrients. In case of salinity variation, Nitzschia sp. of Bacillariophyceae, Isochrysis galbana of Haptophyceae and Tetraselmis gracilis of Prasinophyceae showed optimum growth at the low salinity of 20 and 25 psu. Amphora coffeaeformis and Chetoceros simplex of Bacillariophyceae, and Pavlova lutheri of Haptophyceae adapted well at the relatively high salinities of 30 and 35 psu. However Phaeodactylum tricornutum of Bacillariophyceae and Chlorella sp. of Chlorophyceae showed euryhaline property In case of water temperature variation, most of all the species studied wer inhibited at 10℃. C. simplex, Nitzschia sp., p. tricornutum, Chlorella sp. and T. gracilis grew well at above 20℃. A. coffeaeformis, I. galbana and P. lutheri adapted also at the high temperature of 30℃. Each microalgal strain showed different growth rates and its maximum biomass. Generally microalgal populations from the Jeju coast grow well in relatively high salinity and high water temperature. Their growth were inhibited at low water temperature, but not likely affected at low salinity. This study indicates that the microalgal populations could not be affected by abnormally low salinity phenomena, which have happened occasionally around the west Jeju coast in summer and have led macrobenthic animals to mass mortality.

• 한국표면공학회지
• /
• 제56권6호
• /
• pp.443-450
• /
• 2023

SiC/SiC_f CMC is vulnerable to water vapor corrosion at a high temperature of 1500℃. So, EBC (Environmental Barrier Coating) materials are required to protect Si-based CMCs. Ytterbium silicates are reported to have coefficient of thermal expansion (CTE) similar to that of the base material, such as SiC/SiC_f CMC. When the EBC are materials exposed to high temperature environment, the interface between ytterbium silicates and SiC/SiC_f CMC is not separated, and the coating purpose can be safely achieved. For the perspective of EBC applications, thermally grown oxide (TGO) layer with different CTE is formed by the reaction with water vapor in EBC, which leads to a decrease in life time. In this study, we prepare two types of ytterbium silicates to observe the corrosion behavior during the expose to high temperature and water vapor. In order to observe this behavior, the steam-jet furnace is prepared. In addition, phase formation of these ytterbium silicates is analyzed with microstructures by the before/after steam-jet evaluation at 1500℃ for 100 h.

• 한국농공학회논문집
• /
• 제65권6호
• /
• pp.93-103
• /
• 2023

This study aimed to analyze the impact of water curtain cultivation in the greenhouse complexes on groundwater's electric conductivity and water temperature. The greenhouse complexes are mainly situated along rivers to secure water resources for water curtain cultivation. We classified the groundwater monitoring well into the greenhouse (riverside) and field cultivation areas (plain) to compare the groundwater impact of water curtain cultivation in the greenhouse complex. The groundwater observation network in Miryang, Gyeongsangnam-do, located downstream of the Nakdong River, was selected for the study area. As a result of analyzing the electric conductivity and water temperature, the following differences were found in the observed characteristics by region. 1) The electric conductivity and water temperature of the riverside area, where the permeability is high and close to rivers, showed a constant pattern of annual changes due to the influence of river flow and precipitation. 2) The flat land in general agricultural areas showed general characteristics of bedrock observation in the case of water temperature. Still, it seemed more affected by the surrounding well's water use and water quality. The electric conductivity did not show any particular trend and was influenced by the surrounding environment according to the location of each point.

• 한국지열·수열에너지학회논문집
• /
• 제5권1호
• /
• pp.7-11
• /
• 2009

The purpose of this study is to investigate the performance of a water heat source cascade heat pump system R717(Ammonia) is used for a low-stage working fluid while R134a is for a high-stage. In order to gain a high temperature supply water in winter season, the system is designed to perform a cascade cycle. In this study, two experiments were carried out. One is a system starting test from the low load temperature of $10^{\circ}C$. The other is a system performance investigation over the R717 compressor capacity changes. Experimental results show that when it starts from the low load temperature, the suction temperature of the low-stage compressor is higher than that of a high-stage. The system performance increases when a water source temperature or a low-stage compressor rotational frequency goes higher.

• 한국태양에너지학회 논문집
• /
• 제34권6호
• /
• pp.11-18
• /
• 2014

Two-step water splitting thermochemical cycle with $CeO_2$ foam device was investigated by using a solar simulator composed of 2.5 kW Xe-Arc lamp and mirror reflector. The hydrogen production of $CeO_2$ foam device depending on reaction temperature of Thermal-Reduction step and Water-Decomposition step was analyzed, and the hydrogen production of $CeO_2$ and $NiFe_2O_4/ZrO_2$ foam devices was compared. As a result, the amount of reduced $CeO_2$ considerably varies according to the reaction temperature of Thermal-Reduction step. and hydrogen production was not much when the amount of reduced $CeO_2$ decreased even if the reaction temperature of Water-Decomposition step was high. Therefore, it is very important to keep the reaction temperature of Thermal-Reduction step high in two-step thermochemical cycle with $CeO_2$.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권5호
• /
• pp.25-32
• /
• 2000

In this paper, experiments investigating the high-temperature region heat transfer coefficients for the spray cooling of hot flat plates were performed by down spray water using flat spray nozzles. The heat transfer surface is made of copper and is 100mm in length and 40mm in width and 15mm in thickness. The experimental condition of spray are as follows: temperatures of the water droplets are T=20~$80^{\circ}C$ and droplets volume fluxes are D=0.001565~0.010438$m^3/m^2s$. Next, correlating equations for the heat transfer characteristics of spray cooling in the high temperature region are developed from the effects of droplets volume flux and the surface temperature of heat transfer plate.

• 조명전기설비학회논문지
• /
• 제28권11호
• /
• pp.26-32
• /
• 2014

In electrolysis smelting plants that using high DC current, the bus bar is most important facility for delivering the high current. The copper made bus bar is widely used for various advantages as good electrical and thermal conductivity, resonable malleability, ductility, and not rust easily. However, when high current in copper bus bar, temperature rises and maximum allowable current capacity is restricted by temperature of bus bar. In this paper, we investigated temperature variation of copper bus bar by putting cooling water channel imposed to bus bar construction. For the validity, various simulations were carried out.

• 한국수소및신에너지학회논문집
• /
• 제32권1호
• /
• pp.1-10
• /
• 2021

Water electrolysis technology, which generates hydrogen using renewable energy resources, has recently attracted great attention. Especially, the polymer electrolyte membrane water electrolysis system has several advantages over other water electrolysis technologies, such as high efficiency, low operating temperature, and optimal operating point. Since research that analyzes performance characteristics using test bench have high cost and long test time, however, model based approach is very important. Therefore, in this study, a system model for water electrolysis dynamics of a polymer electrolyte membrane was developed based on MATLAB/Simulink®. The water electrolysis system developed in this study can take into account the heat and mass transfer characteristics in the cell with the load variation. In particular, the performance of the system according to the stack temperature control can be analyzed and evaluated. As a result, the developed water electrolysis system can analyze water pump dynamics and hydrogen generation according to temperature dynamics by reflecting the dynamics of temperature.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2003년도 추계 총회 및 학술발표회
• /
• pp.25-33
• /
• 2003

원자력 발전의 고온 가스로(high temperature gas-cooled reactor, HTGR)의 냉각제로 사용되는 He가스의 폐열에너지를 이용하여 물을 분해해서 수소를 생산하는 “열화학적 수소제조 IS프로세스”에서의 분리막 기술의 응용에 대해 정리하였다. 고온 원자력 열에너지를 이용한 열화학적 수소 제조법은 실현 가능한 단계까지 왔다고 생각되며, 아직 연구 개발 과제가 많이 남아 있지만, 미래의 청정에너지 중의 하나인 수소를 대량 생산할 수 있는 가능성을 갖고 있다.