• 대한기계학회논문집B
• /
• 제20권5호
• /
• pp.1639-1648
• /
• 1996

Protection of gas turbine blade from its erosion and abrasion at high temperature and pressure is the first goal to cleanup the hot gas upstream for IGCC and PFBC. Ceramic filters represent an attractive technology for particle removal at high temperature and high pressure condition. They have demonstrated being a good system for improvement of thermal efficiency and reduction of effluent pollutants in advanced coal-based power systems such as IGCC and PFBC. Ceramic filter elements currently being developed were evaluated in the previous paper. In this paper, we measured the ash size and distribution on cleaning of ceramic candle filter. The results are as follows : in this experimental range, ceramic candle filter was shown to be fully adequate for the removal process of dust under high temperature and pressure. Also filtration efficiency of ceramic candle filter was higher than 98% compared with the regulation limit of particle size in gas turbine inlet.

• 한국수소및신에너지학회논문집
• /
• 제25권5호
• /
• pp.482-490
• /
• 2014

Gaseous sulfur compound such as $H_2S$ or COS in coal- or biomass-derived hot syngas can be purified by solid sorbents at high temperatures. In this study, we investigated the physical properties and reactivity of solid regenerable desulfurization sorbents with 37.2, 41.9, and 46.5wt% ZnO to look into the ZnO content effect. The sorbents were produced by spray-drying method to apply to a fluidized-bed process. Sulfidation and regeneration reaction were carried out using a thermogravimetric analyzer. Sorbent prepared with 46.5wt% ZnO had physical properties suitable for a fluidized-bed process applications such as spherical shape, sufficient mechanical strength and density, high porosity and surface area. It showed high sulfur sorption capacity of 10.4wt% (ZnO utilization of 57%) at reaction temperatures of 500 and $650^{\circ}C$ for sulfidation and regeneration, respectively. However, the sulfur sorption capacity and ZnO utilization were significantly reduced and dimple shape appeared when the ZnO content decreased to 37.2 and 41.9wt%. Sulfur sorption capacity and regenerability were improved as reaction temperature increased within the experimental temperatures used in this work. The reaction temperature zones of $1500{\sim}550^{\circ}C$ and $650{\sim}700^{\circ}C$ are recommended for sulfidation and regeneration, respectively, to lead best reaction performances of the ZnO-based spray-dried sorbents developed in this work.

• 한국대기환경학회지
• /
• 제14권5호
• /
• pp.455-464
• /
• 1998

Removal teals of Soxmox were performed using low density ceramic filters doped with various catalysts. Disc type (50 mmO.Dx10 mmt) low density ceramic filters were doped with three different catalysts such as Cu to remove SOx and NOx, and Mn and Co to remove NOx. The air permeabilities and specific surface areas were 40~50cc/min.cm2.cmH2O and 4.1~8.88 m2/g, respectively. Also, the peak pore sizes of catalyst support were 3~5nm. Tests were focused to search optimum operating temperatures for different catalysts. It was found that as the CuO content increases, SOx removal efficiency was increased. NOx removal efficiencies for Mn, Cu and Co, were 85% at 30$0^{\circ}C$, 90% at 40$0^{\circ}C$ and 90% at 45$0^{\circ}C$, respectively.

• 청정기술
• /
• 제13권4호
• /
• pp.266-273
• /
• 2007

본 연구에서는 석탄가스화 복합발전시스템용 고온건식탈황공정에 포함된 직접황회수공정의 $SO_2$ 촉매환원 반응에서 발생되는 COS의 효과적인 제거를 위한 활성탄계 흡착제의 흡착특성이 연구되었다. $SO_2$의 촉매적 환원을 위하여 전이금속 담지촉매와 복합금속산화물 촉매가 사용되었으며, 이들 촉매의 반응기구에 따라 COS 생성과정과 반응온도에 따른 유출량이 조사되었다. 생성된 저농도의 COS를 효과적으로 제거하기 위하여 상용활성탄과 활성탄의 COS흡착특성을 개선하기 위하여 알칼리금속 수용액(KOH)으로 담지시킨 활성탄이 이용되었다. TGA를 이용하여 온도에 따른 COS 흡착량과 흡착속도를 알 수 있었고, GC-PFPD가 장착된 고정층 흡착시스템을 이용하여 COS 흡착실험을 수행한 결과, 높은 BET 표면적을 지니는 KOH로 처리된 활성탄의 COS 파과시간이 상용활성탄에 비해 장시간 유지되었다. 이와 같은 결과로부터 활성탄 흡착시스템으로 $SO_2$ 환원으로부터 생성되는 COS를 효과적으로 제거할 수 있으며, 알칼리성 금속을 담지할 경우 흡착특성이 향상됨을 확인할 수 있었다.