• Reproductive and Developmental Biology
• /
• v.33 no.3
• /
• pp.119-123
• /
• 2009

The two dimensional quantitative structure-activity relationships (2D-QSARs) models concerning the binding affinity constants ($p[Od.]_{50}$) between 2-cyclohexyltetrahydropyrane and 2-cyclohexyltetrahydrofurane analogues as substrates, and bovine odorant binding protein (bOBP) as receptor were derived by multiple regression analyses method and discussed. The statistical quality of the optimized 2D-QSAR model (5) was good (r=0.907). From the model, the binding affinity constants ($p[Od.]_{50}$) were dependent upon the optimal value ($(TL)_{opt.}$=2.737) of total lipole (TL) of substrate molecules. Based on these findings, the high active compounds predicted by optimized 2D-QSAR model (5) were 2-(dimethylcyclohexyl)tetrahydropyrane molecule and their isomer molecules. The binding affinity constants regarding bOBP of the tetrahydrofuryl-2-yl family compounds were dependent upon the hydrophobicity (logP) of whole substrate molecules. In any case of porcine odorant-binding proteins (pOBP), the constants were dependent upon the hydrophobicity (${\pi}x={\log}P_X-{\log}P_H$) of substituents (R) in substrate molecules. Also, from the optimal values of hydrophobic constant, the hydrophobicity for bOBP influenced ca. twice time bigger (bOBP>pOBP) than that for pOBP.

• Korean Chemical Engineering Research
• /
• v.53 no.1
• /
• pp.111-115
• /
• 2015

To produce patterns with high resolution in gravure printing, it is important to increase ink transfer ratio. The ink which has higher affinity with substrate can be transferred more from the roll to the substrate due to the good wettability between ink and substrate. However, it is difficult to evaluate the affinity between the substrate and the ink which is viscoelastic in nature. In this study, we suggest a practical method to evaluate the interfacial interaction between the ink and various substrates.

• BMB Reports
• /
• v.42 no.3
• /
• pp.166-171
• /
• 2009

Hsp70s assist in the process of protein folding through nucleotide-controlled cycles of substrate binding and release by alternating from an ATP-bound state in which the affinity for substrate is low to an ADP-bound state in which the affinity for substrate is high. It has been long recognized that the two-domain structure of Hsp70 is critical for these regulated interactions. Therefore, it is important to obtain information about conformational changes in the relative positions of Hsp70 domains caused by nucleotide binding. In this study, analytical ultracentrifugation and dynamic light scattering were used to evaluate the effect of ADP and ATP binding on the conformation of the human stress-induced Hsp70.1 protein. The results of these experiments showed that ATP had a larger effect on the conformation of Hsp70 than ADP. In agreement with previous biochemical experiments, our results suggest that conformational changes caused by nucleotide binding are a consequence of the movement in position of both nucleotide- and substrate-binding domains.

• Journal of Food Hygiene and Safety
• /
• v.6 no.3
• /
• pp.127-131
• /
• 1991

${\alpha}-amylase\;and\;{\beta}-amylase$ were extracted from barley and wheat malt, respectively. Their kinetic parameters on gultinous and nonglutinous rice starch were examined. During the germination of barley and wheat, the increaments of ATP levels were significant after 2-day germination and the levels were reduced after 5 days. The dry weights were decreased after 3 days. The activities of amylases were the highest for 6 days in the barley and wheat malt. As for ${\alpha}-amylase$, that the substrate affinity of barley malt on nonglutionous rice starch was greater than other cases. The $V_{max}$ values of ${\alpha}-amylase$ from wheat malt on either type of rice starch showed high, and from barley malt on nonglutinous rice starch were high. The ${\beta}-amylse$ from barley malt showed high substrate affinity on the glutinous rice starch, and $V_{max}$ value of the enzyme from wheat malt on glutinous rice starch was higher than other. The substrate efficiency ($V_{max}/K_{m}$) of ${\beta}-amylase$ on the non glutinous rice strach was better than other cases.

• BMB Reports
• /
• v.45 no.4
• /
• pp.233-238
• /
• 2012

We present a top down separation platform for yeast ribosomal proteins using affinity chromatography and capillary electrophoresis which is designed to allow deposition of proteins onto a substrate. FLAG tagged ribosomes were affinity purified, and rRNA acid precipitation was performed on the ribosomes followed by capillary electrophoresis to separate the ribosomal proteins. Over 26 peaks were detected with excellent reproducibility (<0.5% RSD migration time). This is the first reported separation of eukaryotic ribosomal proteins using capillary electrophoresis. The two stages in this workflow, affinity chromatography and capillary electrophoresis, share the advantages that they are fast, flexible and have small sample requirements in comparison to more commonly used techniques. This method is a remarkably quick route from cell to separation that has the potential to be coupled to high throughput readout platforms for studies of the ribosomal proteome.

• Journal of the Korean institute of surface engineering
• /
• v.32 no.3
• /
• pp.356-359
• /
• 1999

To obtain a biomaterial that has both biological affinity and high mechanical strength, hydroxyapatite granules were implanted into the surface of pure titanium film coated titanium alloy. The film was coated by reactive DC sputtering method on the alloy substrate. Hydroxyapatite granules (32- $38\mu\textrm{m}$ in diameter)were spread over titanium alloy substrate and pressed to implant the granules in the substrate. They can be implanted into substrate under 17MPa at $800^{\circ}C$ for 10minutes. The only tops of the granules were exposed and they were firmly stuck in substrate. The hydroxyapatite implanted titanium alloy composites were expected to be useful for biomaterials as artificial bones and dental roots.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.5
• /
• pp.758-762
• /
• 2007

A new alkyldithiocarbonate (xanthate), as sodium salts, C2H5OCS2Na, was synthesized by the reaction between CS2 with ethyl alcohol in the presence of NaOH. The new xanthate was characterized by 1H NMR, IR and elemental analysis. Then, the new synthesized compound was examined for functional study of cresolase activity of Mushroom Tyrosinase (MT) from a commercial source of Agricus bisporus in 10 mM phosphate buffer pH 6.8, at three temperatures of 10, 20 and 33℃ using UV spectrophotemetry. 4-[(4-methylphenyl)- azo]-phenol (MePAPh) was used as a synthetic substrate for the enzyme for cresolase reaction. The results show that ethyl xanthate can activate or inhibit the cresolase activity of mushroom tyrosinase depending to the concentration of ethyl xanthate. It was concluded that the enzyme has two distinct sites for ethyl xanthate. The first one is a high-affinity activation site and the other is a low-affinity inhibition site. Activation of the enzyme in the low concentration of ethyl xanthate arises from increasing the affinity of binding for the substrate as well as increasing the enzyme catalytic constant. The affinity of ligand binding in the activation site is decreased by increasing of the temperature, which is the opposite result for the inhibition site. Hence, the nature of the interaction of ethyl xanthate is different in two distinct sites. The binding process for cresolase inhibition is only entropy driven, meanwhile the binding process for cresolase activation is not only entropy driven but also enthalpy driven means that hydrophobic interaction is more important in the inhibition site.

• Journal of the Korean Wood Science and Technology
• /
• v.51 no.4
• /
• pp.270-282
• /
• 2023

Lower termites need symbiotic microbes for cellulose digestion. Elizabethkingia miricola strain BM10 has been proposed as a symbiotic microbe that assists in low-temperature digestion and metabolism of Reticulitermes speratus KMT1, a termite on Bukhan Mountain, Seoul, Korea. In E. miricola strain BM10, β-glucosidase genes expressed at 10℃ were identified, and the psychrophilic enzymatic characteristic was confirmed by heterogeneously expressed proteins. Crude β-glucosidase in the culture broth of E. miricola strain BM10 showed specific enzymatic properties, and its substrate affinity was 4.69 times higher than that of Cellic CTec2. Among the genes proposed as β-glucosidase, two genes, bglB_1 and bglA_2, whose gene expression was more than doubled at 10℃ than at 30℃, were identified. They were heterogeneously expressed in Escherichia coli and identified as psychrophilic enzymes with an optimal reaction temperature of about 20℃-25℃. In this study, E. miricola strain BM10, a symbiotic bacterium of lower termites, produced psychrophilic β-glucosidases that contribute to the spread of the low-temperature habitat of a lower termite, R. speratus KMT1.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.189-189
• /
• 2016

In this study, the Al-rich AlTiSiN thin films that consisted of TiN/AlSiN nano-multilayers were deposited on the steel substrate by magnetron sputtering, and their high-temperature oxidation behavior was investigated, which has not yet been adequately studied to date. Since the oxidation behavior of the films depends sensitively on the deposition method and deposition parameters which affect their crystallinity, composition, stoichiometry, thickness, surface roughness, grain size and orientation, the oxidation studies under various conditions are imperative. AlTiSiN nano-multilayer thin films were deposited on a tool steel substrate, and their oxidation behavior of was investigated between 600 and $1000^{\circ}C$ in air. Since the amount of Al which had a high affinity for oxygen was the largest in the film, an ${\alpha}-Al_2O_3-rich$ scale formed, which provided good oxidation resistance. The outer surface scale consisted of ${\alpha}-Al_2O_3$ incoporated with a small amount of Ti, Si, and Fe. Below this outer surface scale, a thin ($Al_2O_3$, $TiO_2$, $SiO_2$)-intermixed scale formed by the inwardly diffusing oxygen. The film oxidized slower than the $TiO_2-forming$ kinetics and TiN films, but faster than ${\alpha}-Al_2O_3-forming$ kinetics. During oxidation, oxygen from the atmosphere diffused inwardly toward the reaction front, whereas nitrogen and the substrate element of iron diffused outwardly to a certain extent.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.5
• /
• pp.344-348
• /
• 1999

Diamond like carbon(DLC) thin films possesed not only marvelous material characteristics such as large thermal conductivity, high hardness and being chemically inert, but also possesed negative electron affinity (NEA) properties. The NEA is an extremely desirable property of the material used in microelestronics and vacuum microelestronics device. DLC films were fabricated by pulsed laser deposition(PLD). Theeffect of the laser energy density and the substrate temperature on the properies of DLC films was investigated. The experiment was accomplished at temperatures in the range of room temperature to $600^{\circ}C$. The laser energy density was in the range of 6 $J/cm^2$ to 16 $J/cm^2$.