• 제목/요약/키워드: high strain rate

검색결과 1,033건 처리시간 0.034초

염분에 따른 한국산 Rotifer, Brachionus plicatilis (S-type) 6 strains의 내구란 생산 (Resting Egg Production of Six Strains of Korean Rotifer, Brachionus plicatilis (S-type))

  • 박흠기;허성범
    • 한국양식학회지
    • /
    • 제9권3호
    • /
    • pp.195-203
    • /
    • 1996
  • 한국 염전지역에서 순수분리한 rotifer, B. plicatilis(S-type) 6 strains의 염분(10, 20, 30 ppt)에 따른 내구란 생산을 조사하였다. Rotifer는 20ml 시험관 배지에서 Nannochloris oculata를 먹이로 $28^{\circ}C$에서 배양하였다. Rotifer 최대밀도는 OKK strain이 염분 10ppt에서 2,050개체/ml로 나타났다. 성장률은 MOK strain의 10 ppt실험구에서 1.028로 가장 빨랐다. 유성생식률은 CHA와 WON strain은 염분이 낮을수록 높게 나타났지만 MOK strain은 염분이 높을수록 높게 나타났고 SOS strain은 염분 20 ppt에서 가장 높게 나타났다. PUA strain은 개체밀도가 높았지만 유성생식이 전혀 나타나지 않았고 OKK strain은 $1.1\~3.0\%$의 낮은 유성생식률을 보였다. CHA, MOK SOS, WON strain의 수정률은 모든 염분구에서 $10.4\~68.8\%$로 나타났지만 OKK strain은 수정이 이루어지지 않았다. Rotifer의 내구란 생산은 strain과 염분에 따라서 차이를 보였다. 20m1 시험관배지에서 가장 높은 내구란 생산은 WON strain으로 10 ppt 실험구에서 4,065개였다. 이와 같은 결과로 볼때 rotifer의 내구란을 대량생산하기 위해서는 적합한 strain의 선택과 염분의 조정이 필요한 것으로 판단된다.

  • PDF

Tension-Compression Asymmetry in the Off-Axis Nonlinear Rate-Dependent Behavior of a Unidirectional Carbon/Epoxy Laminate at High Temperature and Incorporation into Viscoplasticity Modeling

  • Kawai, M.;Zhang, J.Q.;Saito, S.;Xiao, Y.;Hatta, H.
    • Advanced Composite Materials
    • /
    • 제18권3호
    • /
    • pp.265-285
    • /
    • 2009
  • Off-axis compressive deformation behavior of a unidirectional CFRP laminate at high temperature and its strain-rate dependence in a quasi-static range are examined for various fiber orientations. By comparing the off-axis compressive and tensile behaviors at an equal strain rate, the effect of different loading modes on the flow stress level, rate-dependence and nonlinearity of the off-axis inelastic deformation is elucidated. The experimental results indicate that the compressive flow stress levels for relatively larger off-axis angles of $30^{\circ}$, $45^{\circ}$ and $90^{\circ}$ are about 50 percent larger than in tension for the same fiber orientations, respectively. The nonlinear deformations under off-axis tensile and compressive loading conditions exhibit significant strain-rate dependence. Similar features are observed in the fiber-orientation dependence of the off-axis flow stress levels under tension and compression and in the off-axis flow stress differential in tension and compression, regardless of the strain rate. A phenomenological theory of viscoplasticity is then developed which can describe the tension-compression asymmetry as well as the rate dependence, nonlinearity and fiber orientation dependence of the off-axis tensile and compressive behaviors of unidirectional composites in a unified manner. It is demonstrated by comparing with experimental results that the proposed viscoplastic constitutive model can be applied with reasonable accuracy to predict the different, nonlinear and rate-dependent behaviors of the unidirectional composite under off-axis tensile and compressive loading conditions.

변형률속도 민감성을 고려한 요크 코킹공정의 해석에 의한 품질 평가 (Quality Assessment by Analysis of Yoke Caulking Process Considering Strain Rate Sensitivity)

  • 박문식;강경모;한덕수
    • 한국정밀공학회지
    • /
    • 제20권6호
    • /
    • pp.37-46
    • /
    • 2003
  • This paper is to predict quality deterioration resulting from a caulking process of yoke which is a part of automotive steering system. The caluking is a plastic deformation process involving such as impact of high speed tool, contacts between part and fixtures and strain rate sensitivity of the part material. Elaborate application of finite element method is neccesary to calculate changes of part dimensions because they fall into a level of tolerances. Simple work hardening and strain rate sensitive model is proposed fur the material and applied for the simulation by using Abaqus which is able to cater for elastoplastic rate sensitive material and contacts. Numerical results of test models that represent tensile bar and tensile plate are compared with material data inputs. Dimensional changes for the yoke are calculated from simulations and compared to the mesurements and they show good agreement. The method presented here with the material model proved to be valuable to assess quality deterioration for similar metal forming processes.

폴리프로필렌의 변형속도 및 온도변화에 따른 판재 인장시험 평가 (Tensile Test Evaluation of Polypropylene Sheets Following as Strain Rate and Temperature Variation)

  • 김기주
    • 한국산학기술학회논문지
    • /
    • 제19권8호
    • /
    • pp.32-36
    • /
    • 2018
  • 500kgf 용량의 Instron 시험기를 이용하여 폴리프로필렌 판재의 인장시험 평가를 행하였다. 두께가 0.8 mm인 폴리프로필렌 판재의 변형속도민감도를 평가하기 위하여 변형속도는 $5{\times}10^{-4}/sec{\sim}5{\times}10^{-2}/sec$으로 100배 변화를 주어 상온 및 고온인장시험 하였다. 이를 통하여 변형속도 및 온도 변화에 따른 강도변화를 비교하였다. 실험결과 초기 변형속도가 증가할수록 강도가 증가하였으며 이는 폴리프로필렌은 변형속도민감도가 강한 양의 값을 지닌 재료임을 알 수 있었다. 또한 폴리프로필렌 판재의 고온 인장특성을 평가하기 위하여 온도는 80, 120, $160^{\circ}C$로 변화시켜 시험하였다. 고온인장시험 결과 온도가 증가할수록 강도는 감소하였으며 특히 $160^{\circ}C$에서는 강도가 인장강도가 0으로 강하하였다. 변형속도 증가에 따른 온도 증가의 영향을 살펴보면 상온, $80^{\circ}C$$120^{\circ}C$까지는 항복강도 및 인장강도의 증가 폭이 비슷한 수준을 나타내었으나 $160^{\circ}C$에서는 응력이 0에 가까워짐에 따라 강도 증가가 거의 없는 것으로 나타났다. 고온 인장시험에서 변형속도 증가에 따라 항복강도 값이 증가하는 양 보다는 인장강도 값이 증가하는 폭이 컸다.

전자기 성형에서의 변형률 속도 효과 해석 (Analysis of the Strain Rate Effect in Electro-Magnetic Forming)

  • 곽신웅;신효철;이종수
    • 대한기계학회논문집
    • /
    • 제14권5호
    • /
    • pp.1043-1058
    • /
    • 1990
  • 본 연구에서는 전자기 성형법에 의한 원통형상의 가공재의 자유 확관성형 가 공에 대해서 유한요소해석법을 이용한 변형 및 응력해석을 수행하였다. 탄소성 재료 모형을 확장하여 변형 경화율이 변형률 및 변형률 속도의 지배를 받는 변형률 속도 종 속 탄소성 재료 모형을 도입하였고, 1차 제하 이후까지 포함하여 고속 성형시 변형률 속도 효과에 의해 발생하는 현상들에 대해서 연구하였다.결과의 비교 및 논의를 위 하여, 해석대상과 성형조건, 그리고 가공재에 작용하는 자기압력은 Suzuki의 것과 동 일한 것을 사용하였다.

TiC-Mo 고용체 단결정의 고온 압축변형 특성 (Deformation Property of TiC-Mo Solid Solution Single Crystal at High Temperature by Compression Test)

  • 신순기
    • 한국재료학회지
    • /
    • 제24권11호
    • /
    • pp.625-631
    • /
    • 2014
  • To investigate the deformation properties of TiC-(5-20) mol% Mo solid solution single crystals at high temperature by compression testing, single crystals of various compositions were grown by the radio frequency floating zone technique and were deformed by compression at temperature from 1250K to 2270K at strain rates from $5.1{\times}10^{-5}$ to $5.9{\times}10^{-3}/s$. The plastic flow property of solid solution single crystals was found to be clearly different among a three-temperature range (low, intermediate and high temperature ranges) whose boundaries were dependent on the strain rate. From the observed property, we conclude that the deformation in the low temperature range is controlled by the Peierls mechanism, in the intermediate temperature range by the dynamic strain aging and in the high temperature range by the solute atmosphere dragging mechanism. The work softening tends to become less evident with an increasing experimental temperature and with a decreasing strain rate. The temperature and strain rate dependence of the critical resolved shear stress is the strongest in the high temperature range. The curves are divided into three parts with different slopes by a transition temperature. The critical resolved shear stress (${\tau}_{0.2}$) at the high temperature range showed that Mo content dependence of ${\tau}_{0.2}$ with temperature and the dependence is very marked at lower temperature. In the higher temperature range, ${\tau}_{0.2}$ increases monotonously with an increasing Mo content.

다중충돌 쇼트피닝에서 변형률 속도와 소재 경도가 잔류응력에 미치는 영향에 관한 연구 (Effect of Strain Rate and Material Hardness on Residual Stress in Multiple Impact Shot Peening)

  • 김태우;양조예;나두현;이영석
    • 대한기계학회논문집A
    • /
    • 제35권11호
    • /
    • pp.1369-1375
    • /
    • 2011
  • 쇼트피닝 공정은 쇼트볼이 소재에 충돌을 일으킬 때 생기는 압축잔류응력에 의해 소재의 피로 강도를 향상 시키는데 그 목적이 있다. 본 연구는 변형률 속도 민감도 변화가 압축잔류응력에 미치는 영향을 분석하기 위해서 수행되었다. 본 연구자는 변형률 속도 민감도의 영향을 고려한 쇼트피닝 다중 충돌을 ABAQUS 6.9-1 를 사용하여 모사하였다. 사용된 소재는 AISI 4340 강종이다. 본 연구자는 변형률 속도 민감성이 높은 재료와 낮은 재료를 비교하였다. 결과적으로 변형률 속도 민감성이 증가하면 압축 잔류응력은 감소하였다. 또한 경도가 낮은 소재의 압축잔류응력이 경도가 높은 소재보다 더 크게 발생 하였다.

심해저용 전기 저항 용접 소구경 송유관 소재의 온도 및 변형률 속도 에 따른 유동 응력 특성 (Flow Stress Properties of Electric Resistance Welded Small-Sized Subsea Pipeline Subjected to Temperature and Strain Rate Variations)

  • 김영훈;박성주;윤성원;정준모
    • 한국해양공학회지
    • /
    • 제29권3호
    • /
    • pp.241-248
    • /
    • 2015
  • A subsea pipeline for oil/gas transportation or gas injection is subjected to extreme variations in internal pressure and temperature, which can involve a strain rate effect on the pipeline material. This paper describes the flow stress characteristics of a pipeline material called API 5L X52N PSL2, using and experimental approach. High-speed tensile tests were carried out for two metal samples taken from the base and weld parts. The target temperature was 100℃, but two other temperature levels of –20℃and 0℃ were taken into account. Three strain rates were also considered for each temperature level: quasi static, 1/s, and 10/s. Flow stress data were proposed for each temperature level according to these strain rates. The dynamic hardening behaviors of the base and weld metals appeared to be nonlinear on the log-scale strain rate axis. A very high material constant value was required for the Cowper-Symonds constitutive equation to support the experimental results.

구리-크롬 소결단조 합금의 크롬 함유량 변화에 따른 동적 물성특성 (Dynamic Material Property of the Sinter-Forged Cu-Cr Alloys with the Variation of Chrome Content)

  • 송정한;허훈
    • 대한기계학회논문집A
    • /
    • 제30권6호
    • /
    • pp.670-677
    • /
    • 2006
  • Vacuum interrupters are used in various switch-gear components such as circuit breakers, distribution switches, contactors. The electrodes of a vacuum interrupter are manufactured of sinter-forged Cu-Cr material for good electrical and mechanical characteristics. Since the closing velocity is 1-2m/s and impact deformation of the electrode depends on the strain-rate at the given velocity, the dynamic material property of the sinter-forged Cu-Cr alloy is important to design the vacuum interrupter reliably and to identify the impact characteristics of a vacuum interrupter accurately. This paper is concerned with the dynamic material properties of sinter-forged Cu-Cr alloy for various strain rates. The amount of chrome is varied from 10 wt% to 30 wt% in order to investigate the influence of the chrome content on the dynamic material property. The high speed tensile test machine is utilized in order to identify the dynamic property of the Cu-Cr alloy at the intermediate strain-rate and the split Hopkinson pressure bar is used at the high strain-rate. Experimental results from both the quasi-static and the high strain-rate up to the 5000/sec are interpolated with respect to the amount of chrome in order to construct the Johnson-Cook and the modified Johnson-Cook model as the constitutive relation that should be applied to numerical simulation of the impact behavior of electrodes.

변형률 속도 및 수분포화가 암석의 인장강도에 미치는 영향 (Effects of Strain Rate and Water Saturation on the Tensile Strength of Rocks)

  • 정우진
    • 터널과지하공간
    • /
    • 제20권2호
    • /
    • pp.119-124
    • /
    • 2010
  • 암석의 인장강도에 미치는 변형률 속도 및 수분포화의 영향을 파악하기 위하여 건조상태 및 포화상태 3종류의 암석에 대해서 여러 가지 변형률 속도에서의 홉킨슨효과를 이용한 인장파괴실험을 실시하였다. 실험결과 건조상태뿐만 아니라 포화상태에서도 변형률 속도가 증가할수록 암석의 인장강도는 증가하였다. 특히, 건조 상태에 있어서 암석의 동적인장강도는 암석의 종류와는 상관없이 변형률 속도의 약 1/3승에 비례하는 경향을 나타내었다. 또한, 수분포화의 영향으로 공극률이 높은 사암과 응회암은 건조상태와 비교하여 인장강도가 감소하였으나, 공극률이 0.49%로 낮은 화강암은 건조상태와 포화상태와의 사이에 유의한 차이는 없었다.