• Tribology and Lubricants
• /
• 제32권3호
• /
• pp.82-87
• /
• 2016

We performed an experimental research on lubricant oil in dual fuel medium-speed engines. It is important to select the appropriate lubricant oil because it could significantly affect engine lifetime and performance. We generally recommend the selection of the lubricant oil according to the fuel grades as contents in the project guide. However, it is a considerable challenge for shipyards to implement this concept because of the lack of space to install the complicated lubricating oil system for dual fuel engines. Therefore, we determine the adaptability of one-common lubricant oil for HiMSEN dual fuel engine through this experimental research. To check abnormality in gas mode operation and durability of engine components when a lubricating oil with high BN (base number) is used, overhaul inspections and lubricant oil analysis are carried out two times, and four times, respectively, during an operation of approximately 300 h. We investigated the variations in kinematic viscosity, base number, element quantity, pentane insoluble and sulfated ash in lubricant oil analysis. Moreover, we also investigated whether the deposit formation or wear occurred in various bearings, injectors, exhaust valves, intake valves, piston rings and so on through the overhaul inspections. There are no problems in the lubricant analysis and the overhaul inspections. Through the experimental research, we confirm that one-common lubricant oil should be selected according to the higher sulfur content of fuel oil in dual fuel engines.

• 한국추진공학회지
• /
• 제25권4호
• /
• pp.59-70
• /
• 2021

슬링거 연소기 회전연료노즐의 유량과 회전수의 변화에 따른 분무 특성을 관측하기 위한 실험적 연구를 수행하였다. 물 공급장치, 고속 회전모터, 회전연료노즐, 시험용 챔버로 구성된 분무 시험리그를 구성하였으며, 고속카메라와 고출력 광원을 사용하여 회전연료노즐 오리피스로부터 토출되는 물의 분무를 가시화하였다. 실험 결과 유량이 감소하고 회전수가 증가할수록 미립화가 향상됨을 확인하였다. 분무 특성 모드와 성능함수로 구성된 맵을 도출한 결과, 기체의 공기역학적 Weber 수와 액체-기체 모멘텀 플럭스 비는 액체의 주 분열 특성과 관련이 있으며, 액체-기체 모멘텀 플럭스 비와 Rossby 수는 액체 분출 모드와 밀접한 상관관계를 가짐을 확인하였다.

• 한국추진공학회지
• /
• 제16권3호
• /
• pp.16-23
• /
• 2012

정상초음파의 교반이 메탄/공기 예혼합화염의 동역학적 거동에 미치는 영향을 규명하는 실험 결과를 본 연구에서 제시한다. 슐리렌 기법을 이용하여 전파하는 화염을 가시화하였고, 이미지 후처리를 통해 정상초음파 유무에 따른 화염선단의 전파속도를 상세히 관찰하였다. 전파속도는 이론당량비에서 정상 초음파가 교반하는 경우에 크게 증가하였으며, 당량비가 연소 상한계 혹은 연소 하한계로 벗어남에 따라 교반의 효과는 감소하였다. 정상초음파장은 화염 구조의 왜곡을 동반하고, 그 변이 형상은 교반하는 초음파장의 특성에 전적으로 종속하였다.

• 한국군사과학기술학회지
• /
• 제21권5호
• /
• pp.607-613
• /
• 2018

Hydraulic systems are widely used in the field of defense, construction machinery, agricultural machinery, and general industries, due to various advantages such as quick response speed and precision control. The defense equipments such as light rescue vehicle is operated in very harsh environments, so hydraulic components used in defense equipment are required to have very high reliability. In particular, hydraulic piston pump is very important component in a hydraulic systems, so life prediction of pump is essential. Therefore, in this study, we analyze the potential failure and the main failure mode of the hydraulic piston pump for the light rescue vehicle through the FMEA analysis, and predict the life of the pump by the accelerated life test considering the usage conditions.

• Asia pacific journal of information systems
• /
• 제6권2호
• /
• pp.107-124
• /
• 1996

본 연구에서는 인터넷 환경에서 그룹의사결정시스템(GDSS)을 활용하기 위해 현재의 인터넷 기능개선 방향에 대해 분석하였다. 이를 위해 먼저 그룹의사결정지시스템의 요구사항을 기존의 문헌을 통해 정보전달, 의사결정 지원 정보제공 및 정보전달 흐름제어로 분류하였다. 다음에는 각 분야별로 현재의 인터넷이 가지고 있는 한계를 분석하고 이러한 한계를 극복할 수 있는 기술적인 대안들을 OSI 계층별로 분석하였다. 분석결과 현재의 인터넷에서 응용 프로그램과 TCP/IP계층 사이에 전달정보흐름 추적기능(Tracing), 응용 프로그램 코딩기능(Application Dependent Coding), 정보전달모드 제어기능(communication Mode Selection) 및 정보보안기능(Encoding/Decoding)이 추가되는 것으로 분석되었다. 또한 링크계층에는 셀교환 방식이 적합한 것으로 분석되었다. 본 연구의 결과는 그룹의사결정지원시스템 디자인 및 향후 인터넷 화상회의를 위한 시스템 디자인에서도 유용하게 적용될 수 있을 것으로 판단된다.

• 동력기계공학회지
• /
• 제21권3호
• /
• pp.51-59
• /
• 2017

In the early design stage of underwater vehicles, it is important to estimate the vehicle's underwater motion performance. The key design elements for the motion are propellers, battery power, and underwater resistance of the vehicle. Small thrusters with motor and propeller are usually used for the UUV(unmanned underwater vehicles). In this study, a multiphysics thruster model combining electro-mechanical and hydrodynamics characteristics was proposed to estimate the thruster performance. To show the applicability of the mathematical model, an sample thruster was used for the derive the unknown parameters of thruster. Hydrodynamic parameters were calculated for a 3D geometry model of the propeller by ANSYS/CFX program. Finally, Matlab/simulink program was used for the numerical simulation to predict the thruster performance from the given voltage/current input to the motor. Also, proved validity of simulation model by experiment test. Test were done by 2 mode(middle/high speed, reverse). The thruster performance curves obtained from this simulation were confirmed to be similar with experiment results.

• 한국소음진동공학회논문집
• /
• 제18권9호
• /
• pp.972-981
• /
• 2008

The blower which is installed in a FCEV(fuel cell electric vehicle) may cause noise due to misalignment and unbalance of mechanical components that rotate at high speed. One of the key points in efforts to minimize the noise radiation from a blower is the knowledge of the main radiating component and the relation between the surface vibration of a blower and the sound pressure. In this research, the blower model is developed based on FEM(finite element method). FE(finite element) model is reliable by correlation of frequencies and MAC(modal assurance criterion) values between EMA(experimental modal analysis) and FEA(finite element analysis). This model is applied to predict the vibration of a blower by using inverse force identification method and predict the radiating noise by using BEM(boundary element method). Comparing the frequencies of resonance and those mode shapes between EMA and FEA, a structural modification of the FE model is evaluated for reducing the parameters of the blower noise.

• 전기학회논문지
• /
• 제62권7호
• /
• pp.1045-1052
• /
• 2013

In this study we deal with design procedures for the flywheel energy storage system that has the capacity to store the regenerative energy produced from the railway vehicles. The flywheel energy storage system (FESS) stores the regenerative electrical energy into the high speed rotational flywheel, by conversion the electrical energy into the mechanical rotational energy. Thus the FESS is composed of the energy conversion components, such as the motor and generator, mechanical support components, such as the rotational rotor, the magnetic bearings to support the rotor, and the digital controller to control the air gap between the rotor and the magnetic bearings. In this paper the design procedures for the rotor operating at the rigid mode and the magnetic bearings to support the rotational rotor without contact are presented.

• 한국연소학회지
• /
• 제3권1호
• /
• pp.59-69
• /
• 1998

The results of study on the active control of naturally occurring combustion oscillations with a single dominant frequency in an atmospheric dump combustor are presented. Control was achieved by an oscillatory infection of secondary fuel at the dump plane. A high speed solenoid valve with a maximum frequency of 250Hz was used as the actuator and a sound level meter, located at the combustor exit, measured the pressure fluctuations which served as the feedback signal for the control loop. Instability characteristics were mapped over a range of mean mixing section velocities from 6.7 m/s-9.3 m/s and with three mixing conditions. Different fuel/air mixing conditions were investigated by introducing varying percentages of primary fuel at two locations, one at the entrance to the mixing section and one 6 mixing tube diameters upstream of the dump plane. Control studies were conducted at a mean velocity of 9.3 m/s, with an air temperature of $415^{\circ}C$, and from flame blowout to the stoichiometric condition.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제25회 추계학술대회논문집
• /
• pp.141-146
• /
• 2005

본 논문은 램제트/스크램제트 엔진에 대한 이론적인 해석 결과를 보여준다. 본 연구의 주요 목적은 램제트/스크램제트 엔진의 성능변수에 대하여 해석적 연구를 통해 물리적인 이해와 기초를 제시하는 것이다. 램제트/스크램제트 성능에 있어서 비행 마하수와 흡입구, 연소특성 등의 영향에 대하여 해석적 연구를 수행하였으며, 일정한 압력 또는 일정한 단면적을 가진 연소기에 대하여 사이클 해석을 통해 비교/분석하였다. 또한 연소기 입구에서의 최적 마하수에 대하여 연구하였다.