• 제목/요약/키워드: high speed data transfer

검색결과 229건 처리시간 0.042초

Dual-Port SDRAM Optimization with Semaphore Authority Management Controller

  • Kim, Jae-Hwan;Chong, Jong-Wha
    • ETRI Journal
    • /
    • 제32권1호
    • /
    • pp.84-92
    • /
    • 2010
  • This paper proposes the semaphore authority management (SAM) controller to optimize the dual-port SDRAM (DPSDRAM) in the mobile multimedia systems. Recently, the DPSDRAM with a shared bank enabling the exchange of data between two processors at high speed has been developed for mobile multimedia systems based on dual-processors. However, the latency of DPSDRAM caused by the semaphore for preventing the access contention at the shared bank slows down the data transfer rate and reduces the memory bandwidth. The methodology of SAM increases the data transfer rate by minimizing the semaphore latency. The SAM prevents the latency of reading the semaphore register of DPSDRAM, and reduces the latency of waiting for the authority of the shared bank to be changed. It also reduces the number of authority requests and the number of times authority changes. The experimental results using a 1 Gb DPSDRAM (OneDRAM) with the SAM controllers at 66 MHz show 1.6 times improvement of the data transfer rate between two processors compared with the traditional controller. In addition, the SAM shows bandwidth enhancement of up to 38% for port A and 31% for port B compared with the traditional controller.

고배속 광디스크 드라이브 트랙 추종 제어 시스템에서의 외란 관측기를 이용한 점근적 외란 제거 (Asymptotic Disturbance Rejection using a Disturbance Observer in the Track-Following Control System of a High-Speed Optical Disk Drive)

  • 유정래;문정호;진경복;정명진
    • 제어로봇시스템학회논문지
    • /
    • 제10권5호
    • /
    • pp.402-410
    • /
    • 2004
  • To obtain a good tracking performance in an optical disk drive servo system, it is essential to attenuate periodic disturbances caused by eccentric rotation of the disk. As an effective control scheme for enhancing disturbance attenuation performance, disturbance observers (DOBs) have been successfully applied to the track-following servo system of optical disk drives. In disk drive systems, the improvement of data transfer rate has been achieved mainly by the increase of disk rotational speed, which leads to the increase of the disturbance frequency. Conventional DOBs are no longer effective in disk drive systems with a high-speed rotation mechanism because the performance of conventional DOBs is severely degraded as the disk rotational frequency increases. This paper proposes a new DOB structure for effective rejection of the disturbance in optical disk drives with a very high rotation speed. Asymptotic disturbance rejection is achieved by adopting a band-pass filter in the DOB structure, which is tuned based on the information on the disturbance frequency. In addition, performance sensitivity of the proposed DOB to changes in disk rotational frequency is analyzed. The effectiveness of the proposed DOB is verified through simulations and experiments using a DVD-ROM drive.

재생온도가 저온인 경우 제습로터의 재생부/제습부 면적비율과 회전속도 최적화 (Optimization of the Area Ratio of Regeneration to Dehumidification and Rotor Speed on the Condition of Low Regeneration Temperature)

  • 정재동;이대영;윤석만
    • 설비공학논문집
    • /
    • 제19권7호
    • /
    • pp.521-528
    • /
    • 2007
  • The desiccant rotor is the most essential component of desiccant cooling system, but its design relies on manufacturer's experience and principles are not yet clear in spite of a lot of theoretical/experimental work published. The mathematical modeling of desiccant rotor needs solution of coupled partial differential equations of heat and mass transfer. In this study, numerical program is developed and validated using a real desiccant rotor. The calculation results are in reasonable agreement with the experimental data and other available numerical results. Optimization of desiccant rotor on the condition of low regeneration temperature are investigated. The optimal rotor speed at which the process outlet humidity becomes minimized, shows same as that of the system optimization. Compared to high regeneration temperature, broad is the range of optimal speed of low regeneration temperature. Systematic analysis on the optimal area ratio of regeneration to dehumidification section has also been conducted.

무선 ATM에서의 오류 제어 개선 방안 (Improved for Error Control Scheme in Wireless ATM)

  • 이창범;김영웅;소성렬;김영권
    • 전기전자학회논문지
    • /
    • 제4권2호
    • /
    • pp.274-280
    • /
    • 2000
  • 일반적으로 무선 환경은 유선환경에 비하여 높은 오류율을 가지기 때문에, 낮은 오류율을 가지는 유선망의 DLC(Data Link Control)계층 프로토콜을 무선망에 그대로 적용하는 것은 적합하지 않다. 또한 기존의 무선망을 위한 DLC계층 프로토콜 역시 저속의 데이터 서비스에 최적화 되어 있으므로, 고속화 및 멀티미디어화 되고 있는 현재의 무선 환경에는 적합하지 않다. 따라서, 오늘날의 이동통신 환경에 부합되는 새로운 DLC계층 프로토콜이 요구된다. 본 논문에서는 다양한 트래픽 속성을 지원하고, 고속 및 멀티미디어 데이터 서비스에 적합한 WATM(Wireless Asynchronous Transfer Mode)에서의 오류 제어 방안을 제시한다. 본 논문에서 제시하는 오류 제어 방안은 최대 허용 지연 범위를 초과한 셀을 폐기할 수 있는 ASR ARQ(Adaptive Selective Repeat Automatic Repeat Request)프로토콜의 일부를 변형하여 성능을 개선하고 지연에 민감한 트래픽을 위하여 FEC(Forward Error Correction)를 첨가하여 전송 지연 증가를 억제하였다. 시뮬레이션에 의한 성능 분석 결과, 본 논문에서 제안한 방안은 기존의 ASR ARQ 프로토콜에 비하여 개선된 성능을 나타내었다.

  • PDF

UDT 환경에서 혼잡상황 예측 및 패킷손실을 고려한 성능향상 기법 (A Performance Improvement Method with Considering of Congestion Prediction and Packet Loss on UDT Environment)

  • 박종선;이승아;김승해;조기환
    • 한국콘텐츠학회논문지
    • /
    • 제11권2호
    • /
    • pp.69-78
    • /
    • 2011
  • 최근 네트워크 기술의 비약적인 발전으로 사용자가 이용할 수 있는 대역폭이 증가하고 있다. 이에 따라 대용량 고속 네트워크에서 보다 신속하고 안정적인 전송기법이 요구되고 있다. UDT(UDP based Data Transfer protocol)는 UDP 기반의 전송 프로토콜이며, 일정 SYN time마다 rate control을 진행함으로써 긴 RTT 환경에서 TCP 보다 두드러진 성능을 보인다. 하지만, NAK 발생시 고정적인 sendInterval의 증가와, 이전 시간의 RTT에 기반한 flow control로 인해 최적의 성능을 기대하기 힘들다. 본 논문에서는 실험에 의한 결과값을 바탕으로 NAK 수신시 RTT 구간에 따라 sendInterval을 조절하는 rate 제어기법을 제시한다. 또한 TCP vegas에 기반하여 네트워크 혼잡을 예측하는 향상된 flow 제어기법을 제시한다. 실제 Testbed를 구성하여 실험한 결과, 각각의 제안기법에 대해 약 20Mbps정도 향상된 throughput이 측정되었다. 또한, 두 기법을 혼합 적용한 결과에서는 최고 26Mbps의 성능 향상을 확인하였다.

Push-To-Talk 재난 서비스 환경에서 전송 지연 최소화를 위한 고속 데이터 복사 및 키 성능 지표 개선 방안 (Methods of High-speed Data Copy and Key Performance Indicator Enhancement for Minimizing the Transfer Delay in the Public Safety Push-To-Talk Service)

  • 채용두;최윤호;정우석;남백산;김주엽
    • 한국통신학회논문지
    • /
    • 제41권11호
    • /
    • pp.1481-1489
    • /
    • 2016
  • 유무선 통신 기술 및 Internet Protocol (IP) 기술의 발전 및 보편화에 따라 최근 다양한 데이터 서비스가 등장하게 되었다. 이에 따라 1:1 데이터 전송을 주된 형태로 하는 전통적인 서비스와는 다르게, 1:N 데이터 전송을 활용하는 다양한 서비스가 등장하고 있으며, 이 서비스들은 1:N 전송의 효율성 및 성능 향상을 요구하고 있다. 특히 최근 많은 관심을 받고 있는 국가재난안전통신망에서 가장 중요한 서비스인 Push-To-Talk (PTT) 서비스의 경우 서비스 서버가 다수의 그룹 수신자에게 동일한 음성 데이터를 실시간 및 최소 지연 시간으로 전달해야 한다. 본 논문에서는 이런 서비스 요구 경향에 따라, 동일 데이터를 다수의 수신자에게 전달하기 위한 효율을 높이는 방법을 제시한다. 또한, 실제 유무선 통신망이 구축된 필드 환경에서 1:N 전송 성능을 어느 정도까지 높일 수 있는지 그 가능성에 대해 PTT 서비스 핵심 성능 지표 관점에서 분석해보고자 한다.

ATM 망에서 CT 서비스를 위한 버퍼 할당 방식의 성능 분석 (Performance Analysis of Buffer Allocation Schemes for Controlled Transfer Service in ATM Networks)

  • 김병철;조유제안윤영권율
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 1998년도 추계종합학술대회 논문집
    • /
    • pp.261-264
    • /
    • 1998
  • Controlled transfer (CT) capability, a new ATM transfer capability (ATC) for high-speed data applications which using credit-based flow control, has recently been proposed and studied in ITU-T. In this paper, we review the existing dyanmic buffer allocation schemes and propose an improved scheme. Also, we compare the performances of the existing buffer allocation methods such as static allocation, flow controlled virtual channels (FCVC), and zero queueing flow control (ZQFC) with the proposed method through simulation. Simulation results show that the proposed scheme exhibits a better performance than the existing schemes in terms of throughput, fairness, queue length and link utilization.

  • PDF

WiBro 시스템에서 이동성을 고려한 데이터 전송효율 분석 (Data Transfer Efficiency Analysis Considering Mobility in WiBro System)

  • 임석구
    • 한국산학기술학회논문지
    • /
    • 제6권5호
    • /
    • pp.446-452
    • /
    • 2005
  • WiBro는 그 이름이 의미하듯이 이동 중에도 다양한 단말기를 이용해서 높은 전송속도로 무선인터넷 접속이 가능하도록 하는 서비스이다. WiBro는 인터넷 서비스 제공에 적합한 All-lP망 구조를 택하고 있어 망의 구조가 단순하고 다양한 부가 서비스 제공이 가능하다. 본 논문에서는 단말기의 이동성 모형을 제시하고 데이터 padding에 의해 전송효율이 떨어지는 기존의 방식을 개선한 효율적인 방식을 제안하였으며 시뮬fp이션에 의해 그 성능을 분석하였다.

  • PDF

IEC 96-1 Line Injection Method를 이용한 다 도체 통신케이블 차폐층의 전달임피던스 측정 (Measurement of Transfer Impedance on Shielded Multiconductor Telecommunication Cables using IEC 96-1 Line Injection Method)

  • 이현영;오호석;박동철
    • 한국전자파학회논문지
    • /
    • 제14권4호
    • /
    • pp.377-383
    • /
    • 2003
  • 동(copper) 케이블을 이용한 xDSL 초고속서비스가 널리 보급됨에 따라 외부 전자파에 의한 통신케이블의 전자파 결합특성을 해hi하기 위해 케이블 쉴드층의 전달임피던스가 중요하게 되었다. 본 논문에서는 xDSL 서비스를 제공하기 위해 사용되는 대표적인 형태의 통신케이블에 대해 IEC 96-1의 line injection method를 이용하여 전달임피던스를 측정하였다. 또한 injection line의 위치, 내부 도체의 위치가 전달임피던스에 어떻게 영향을 주는지를 분석하였으며, 이를 근거로 통신케이블의 전달임피던스 특성 모델을 제시하였다.

대용량 멀티미디어 전송을 위한 IEEE 1394고속 직렬 버스의 성능 분석 (Performance Analysis of IEEE 1394 High Speed Serial Bus for Massive Multimedia Transmission)

  • 이희진;민구봉;김종권
    • 한국정보과학회논문지:정보통신
    • /
    • 제30권4호
    • /
    • pp.494-503
    • /
    • 2003
  • IEEE 1394 고속 직렬 버스(이하 IEEE 1394 혹은 버스)는 실시간 데이타 및 일반 패킷 데이타 전송을 위해 가전제품군과 PC 간의 고속 멀티미디어 통신을 저가로 제공한다. IEEE 1394의 전송 모드는 크게 비동기와 등시성 모드가 있어, 비동기 모드는 최선형 서비스를 제공하고, 등시성 전송 모드는 대역폭을 예약해 QoS를 보장한다. 본 논문은 링크 계층 및 응용 계층 수준에서 IEEE 1394의 성능을 분석하고 각 전송 모드를 비교한다. 응용 계층 수준의 성능 분석을 위해 1394 계층과 상위 계층 사이에 필요한 대표적인 인터페이스인 고정 방식과 적응적 방식을 시스템에 적용하고, 이를 각기 폴링 시스템으로 분석한다. 그리고 분석 모델의 타당성을 시뮬레이션을 통해 확인한다. 그 결과, IEEE 1394의 데이타 전송모드를 적응적으로 선택하여 버스 접근 지연시간을 줄이고 대역폭 낭비를 막아 버스 이용률을 높일 수 있음을 보였다.