• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.387-392
• /
• 2006

The recent on indoor air problem has led to many studies on the methods and effects of ventilation for better indoor air quality. Although natural ventilation is the most effective and energy-saving method in residental housings, the small size of openable window has been a problem in high-rise residential buildings to ventilate only through natural ventilation. Consequently, the installation of mechanical ventilation system has been a requirement in residential buildings, and has caused other problems such as increase of energy consumption and SBS. Hybrid ventilation which uses forces of both natural and mechanical power has been introduced to solve the problem of increase in energy consumption with natural ventilation. In this paper, two types of hybrid ventilation systems in residential building were introduced. One type was with natural ventilation through vent grille in the window, and another type was with natural ventilation through ceiling duct while both types used mechanical ventilation system with the outlets. The indoor temperature distribution and pollution density distribution in summer while operating the ceiling air conditioner were analyzed through CFD simulation. In this paper, the optimal location of diffusers to achieve thermal comfort would be proposed.

• 한국산학기술학회논문지
• /
• 제20권1호
• /
• pp.401-408
• /
• 2019

본 연구는 건축물 옥상에 설치되는 옥외광고탑의 강풍피해 경감을 위하여, 중저층의 건축물 옥상에 설치되는 광고판에 작용하는 최대풍압력 분포에 따른 광고판의 변형을 CFD 수치해석을 통하여 고찰한 연구이다. 수치해석을 위하여 $(b)20m{\times}(d)10m{\times}(h)30m$의 건물에 광고판이 설치되는 것을 가정하여 기본모델과 광고판의 크기를 변경한 3개의 모델을 사용하여 최대 풍압 형성에 대한 변형을 고찰하였다. 수치해석 결과, 광고판의 모양이 장방형에 가까울수록 수평적인 변형이 지배적으로 발생하며 양단부의 모서리 부분에서 높은 풍압력과 변형이 발생한다. 그리고 광고판의 높이가 클수록 수직적인 변형이 지배적으로 발생하고, 배면에 정압이 형성되는 특징이 있다. 광고판의 폭보다 높이가 낮아지는 경우, 최대 풍압은 중앙부 상부 집중적으로 발생한다. 따라서, 높이와 너비의 비가 1에 가까울수록 최대 풍압의 분포가 안정적이고 풍압에 의한 영향이 비교적 낮다는 결과를 확인할 수 있었다. 이 결과를 토대로 바람의 영향을 막는 구조적인 보강과 높이와 너비의 비가 1에 가까운 여러 개의 광고판으로 전체 광고판을 구성하는 등의 풍압력 발생에 대해 유연한 대응이 필요하다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 추계학술대회
• /
• pp.823-824
• /
• 2016

일반적으로 배전반, 분전반, 전동기제어반(Motor Control Center;MCC)은 집단거주지역, 빌딩, 학교, 공장, 항만, 공항, 상하수 처리장, 변전소, 중공업 플랜트 등의 광범위한 전력 수용가에 설치되어 특고압의 전력을 해당 설비들에 요구되는 전압으로 변환하여 공급하는데 사용된다. 이와 같은 배전반, 분전반, MCC에 포함되는 전기설비의 사고는 부스바 접속부의 열화에 의한 사고, 부스바의 접점 및 연결 부위에서의 접촉 불량에 의한 사고, 부스바 접속부의 과열 현상에 의한 사고로 구분된다. 본 논문에서는 부스바 접촉부의 볼트 및 너트의 풀림상태, 접촉부 열화 측정이 가능하며, 배전반 내부온도와 부스바 온도를 측정하여 추이변화에 대한 감시기능이 있는 부스바 접촉부 체결상태 모니터링 시스템을 제안한다. 제안된 시스템은 정량적인 부스바 체결상태 검출과 부스바 현재온도 검출의 이중적인 센싱에 의해 부스바 접촉부 정상여부 판별이 가능하여 전기설비 사고를 줄일 수 있을 것으로 기대된다.

• 대한건축학회논문집:계획계
• /
• 제34권2호
• /
• pp.23-31
• /
• 2018

In recent years, as the development of construction technology and population increase, buildings are becoming more complex and high-rise. These large scale buildings are difficult to secure fire and evacuation safety when fire occurs. So it is necessary to prepare specific measures. According to this situation, in 2011, Republic of Korea officially launched Performance-based Design in "Fire-fighting system Installation business Act". But even 6 years passed since the enforcement, there are still faces manifold problems in the course of implementation. In order to examine the necessary improvements, in this study, I conducted interviews and questionnaires with experts, investigated the improvement items under current laws. And draw up a measures for that items. The subjects of the survey were fire-fighting officer, professional engineer fire fighting, fire protection planner and professor in Daegu. As a result of twice surveys, a total of 19 items are derived. And then compared and analyzed the criteria of overseas countries, and suggested improvement directions for final items. In addition, conducted a third questionnaire survey on the proposed improvement direction to verify the appropriateness of the alternative. The results of this study will be used as basic data to deal with the general problems of performance-based design in future, and further study on each item will be needed.

• 대한건축학회논문집:계획계
• /
• 제34권2호
• /
• pp.3-11
• /
• 2018

Korea has achieved a rapid economic development and with the increase in population and national income and the expansion of social and economic activities, energy consumption has rapidly increased too. Energy consumption per head has constantly increased and currently, power consumption per head is 7.5 times bigger than in 1985. Buildings occupy 25% of total energy consumption and especially, 50% of total energy is consumed for heating and cooling. In this situation, multi-family housing, which has constantly been increased, has an energy saving rate of 1.9%, which is the lowest level and this makes the government's energy policy for sustainable energy system development useless. Besides, energy consumption leads to secondary problems, such as air, water and marine pollution and heat pollution and wastewater/drainage and the increased use of fossil fuel is a fundamental reason for ozone layer destruction and global warming. Therefore, efficient energy consumption plans are required. This study aims to analyze energy performance in each block type of high-rise and diversified multi-family housing that accounts for 60% of all the housing forms, depending on the variations in stories through BIM-based energy simulation. For this study, four representative block types were selected, based on the multi-family floor plan, which is certified for energy performance evaluation and they were applied to the floor plan of a multi-family house that is scheduled to be built. Then BIM modeling was conducted from the fifth story to the 40th story at an intervals of 5 stories and based on the finding, energy characteristics of each block type and energy performance depending on the variations in stories were analyzed. It is considered that this would serve as objective data for block type and block story decision of energy performance-based multi-family housing.

• 대한건축학회논문집:구조계
• /
• 제33권12호
• /
• pp.37-44
• /
• 2017

Due to structural characteristics, construction costs and duration of a modular system would be saved by minimizing the schedule on the job site. As such, it is crucial to develop a connection that can guarantee stiffness while allowing for simple assembling. Particularly, the mid- to high-rise construction of the modular system necessitates the securing of the structural stability and seismic performance of multi-unit frames and connections, and thus, the stiffness of unit-assembled structures needs to be re-evaluated and designed. However, evaluating a frame consisting of slender members and reinforcing materials is a complicated process. Therefore, the present study aims to examine the structural characteristics of a modular unit connection based a method for reinforcing connection brackets and hinges while minimizing the loss of the cross section. Toward this end, the study modeled the beam-to-column connection of a modular system with the proposed connection, and produced a specimen which was used to perform a cycling loading test. The study compared the initial stiffness, the attributes of the hysteretic behavior, and the maximum flexural moment, and observed whether the model acquired the seismic performance, compared to the flexural strength of the steel moment frame connection that is required by the Korean Building Code. The test results showed that the proposed connection produced a similar initial stiffness value to that of the theoretical equation, and its maximum strength exceeded the theoretical strength. Furthermore, the model with a larger ceiling bracket showed higher seismic performance, which was further increased by the reinforcement of the plate.

• 한국구조물진단유지관리공학회 논문집
• /
• 제26권2호
• /
• pp.51-58
• /
• 2022

플랫 플레이트는 매우 경제적인 구조시스템으로서 고층건물과 아파트, 지하 주차장등에 널리 쓰인다. 하지만 기둥-슬래브 접합부가 뚫림전단에 취약하기 때문에 건물의 연쇄붕괴로 이어질 수 있는 단점이 있다. 이에 본 연구에서는 뚫림전단강도 증가, 연성능력 향상, 시공성면에서 뛰어난 나선형 철근 전단 보강재가 제안되었으며, 실험을 통해 나선형 철근 전단보강재의 강도를 평가하였다. 현행 기준은 전단보강된 슬래브-기둥 접합부의 뚫림전단강도를 정확하게 예측하지 못하고 있다. 그 이유는 전단보강재가 설치되는 슬래브의 두께가 얇을경우 정착길이가 확보되지 못하여 전단보강재가 항복강도에 이르기 전에 파괴가 일어나기 때문이다. 이에 본 연구에서는 유한요소해석 프로그램 LUSAS ver14.3을 이용하여 나선형 전단보강재의 보강성능에 영향을 미치는 변수를 분석하여 강도보정계수를 도출하였다. 또한 CEB-FIP 데이터뱅크에 수록된 실험체의 회귀분석을 통해 전단보강된 슬래브-기둥 접합부의 뚫림전단강도 산정식을 제안하였다.

• Geomechanics and Engineering
• /
• 제30권2호
• /
• pp.169-185
• /
• 2022

The urbanization and increasing rate of population demands effective means of transportation system (basement and tunnels) as well as high-rise building (resting on piled foundation) for accommodation. Therefore, it unavoidable to construct basements (i.e., excavation) nearby piled foundation. Since the basement excavation inevitably induces soil movement and stress changes in the ground, it may cause differential settlements to nearby piled raft foundation. To understand settlement and load transfer mechanism in the piled raft due to excavation-induced stress release, numerical parametric studies are carried out in this study. The effects of excavation depths (i.e., formation level) relative to piled raft were investigated by simulating the excavation near the pile shaft (i.e., H_e/L_p=0.67), next to (H_e/L_p=1.00) and below the pile toe (H_e/L_p=1.33). In addition, effects of sand density and raft fixity condition were investigated. The computed results have revealed that the induced settlement, tilting, pile lateral movement and load transfer mechanism in the piled raft depends upon the embedded depth of the diaphragm wall. Additional settlement of the piled raft due to excavation can be account for apparent loss of load carrying capacity of the piled raft (ALPC). The highest apparent loss of piled raft capacity ALPC (on the account of induced piled raft settlement) of 50% was calculated in in case of H_e/L_p = 1.33. Furthermore, the induced settlement decreased with increasing the relative density from 30% to 90%. On the contrary, the tilting of the raft increases in denser ground. The larger bending moment and lateral force was induced at the piled heads in fixed and pinned raft condition.

• 한국지반공학회논문집
• /
• 제26권12호
• /
• pp.31-40
• /
• 2010

본 연구에서는 수직 및 수평하중을 받는 말뚝기초의 두부구속조건(고정단, 힌지단)에 따른 3차원 수치해석을 수행하였다. 수평하중과 수직하중 작용 시 말뚝과 기초의 강결합(고정단)이 힌지결합에 비하여 말뚝두부에서 횡방향 강성 및 단면 발생모멘트(휨모멘트)가 크게 나타나고 전면기초(raft)에서 발생하는 전단력도 크게 나타남을 알 수 있었다. 따라서 말뚝의 두부구속조건이 말뚝기초 전체의 거동에 지대한 영향을 미치는 것을 알 수 있었으며, 힌지결합이 강결합과 비교하여 전면기초의 두께 및 말뚝의 철근 배근량을 감소시킬 수 있기 때문에 허용변위를 만족하는 선에서 경제적인 말뚝기초의 설계가 가능할 것으로 판단된다.

• 한국농공학회논문집
• /
• 제65권6호
• /
• pp.65-78
• /
• 2023

In recent times, the frequency and intensity of natural disasters, such as heavy rains and typhoons, have been increasing due to the impacts of climate change. This has led to a rise in social and economic damages. Rural areas, in particular, possess limited disaster response capabilities due to their underdeveloped infrastructure and are highly vulnerable to flooding. Therefore, it is crucial to establish preventative and responsive measures. In this study, an Inventory-Based Flood Loss Estimation (IB-FLE) method utilizing high-resolution spatial information was developed for estimating flood-related losses in rural areas. Additionally, the developed approach was applied to a study area and compared with the Multidimensional Flood Damage Analysis (MD-FDA) method. Compared to the MD-FDA, the IB-FLE enables faster and more accurate estimation of flood damages and allows for the assessment of individual building and agricultural land losses using up-to-date information. The findings of this study are expected to contribute to the rational allocation of budgets for rural flood damage prevention and recovery, as well as enhancing disaster response capabilities.