• 생물환경조절학회지
• /
• 제16권3호
• /
• pp.269-273
• /
• 2007

감나무의 휴면 정도에 따른 내동성을 비교하고자 '부유', '상서조생', '서촌조생', 갑주백목', '청도반시' 등의 1년생 가지를 1월 20일, 2월 20일, 3월 20일에 각각 채취하여 -5, -10, -15, -20, -25 및 $-30^{\circ}C$ 등으로 처리한 후 전해질 누출률, TTC 검정 및 눈의 발아율을 조사하였다. 전해질 누출률은 1월 20일의 가지에서 가장 낮았고, 3월 20일의 가지에서 가장 높았다. '부유'라 '청도반시' 가지의 전해질 누출률은 1월 20일에서 높았고 2월 20일에는 낮았으며, '상서조생'과 '서촌조생'은 반대의 경향이었고, '갑주백목'은 중간 정도 수준이었다. TTC 검정을 통한 흡광률은 1월 20일의 가지에서 가장 높았고, 2월 20일과 3월 20일의 가지에서는 낮았다. '부유'와 '상서조생' 가지의 흡광률은 1월 20일과 3월 20일에서 낮고 2월 20일에서는 높은 경향이었다. '서촌조생'과 '갑주백목'의 가지는 채취시기에 관계없이 높은 수준이었다. 눈의 발아율은 2월 20일의 가지에서 가장 높았고 3월 20일의 가지에서 낮았다. 그리고 대부분 품종의 발아율은 휴면정도에 관계없이 $-20^{\circ}C$ 처리에서 전혀 발아하지 않았다. '부유', '서촌조생' 및 '청도반시'의 가지는 휴면정도에 관계없이 비교적 높았지만 '상서조생'의 가지는 낮았다. '갑주백목'의 가지는 1월 20일에만 높은 수준이었다. 따라서 감나무의 내동성은 휴면 타파 후 가장 약하며, 떫은감과 단감 간 차이는 거의 없는 것으로 생각된다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.915-922
• /
• 2017

내열 및 내유성 고무복합체 특성연구(The study on the thermal and oil resistance rubber composite), 2016.[6] 연구에서는 고온($150^{\circ}C$, $175^{\circ}C$, $200^{\circ}C$) 조건의 고온촉진노화를 통하여 불소고무 복합체의 수명을 예측하였다. 일반적인 고무제품은 온도, 습도, 오존, 빛, 유제, 기계 및 전기적 응력 등의 특성저하 인자에 따라 다른 특성을 나타낼 가능성이 있으며, 이러한 문제를 해결하기 위하여 "내열 및 내유성 고무복합체 특성연구"[6] 연구에서 얻어진 고온촉진노화에 의한 수명 예측값과 저온촉진노화간의 인장강도 변화율 및 신장률 변화율 그리고 부피 변화율, 무게 변화율, 두께 변화율 및 열전도도를 비교 검토하였다. 검토 결과, 요구 한계수명은 모두 만족하였지만 고온촉진노화 결과와 저온촉진노화 결과 간 변화율에서 약간의 격차를 보였다. 이러한 변화율 격차가 일어나는 원인은 고온촉진노화에서는 노화 시 불소고무의 주사슬 분해로 인하여 인장강도, 신장률 감소 및 부피, 무게, 두께 증가가 일어나는데 비해 저온촉진노화에서는 $80^{\circ}C$에서 불소고무의 지속적 경화반응으로 인하여 인장강도, 신장률 및 부피, 무게, 두께 변화가 적게 나타났을 것으로 판단된다.

• 생태와환경
• /
• 제52권3호
• /
• pp.266-273
• /
• 2019

인간의 인위적 활동으로 인해 발생하는 중금속 중 카드뮴(Cd)과 아연(Zn)은 다양한 경로를 통해 하천으로 유입되어 서식생물에게 유해 영향을 준다. 본 연구에서는 도심 하천에서 우점하는 장수깔따구 (Chironomus plumosus)를 이용하여 Cd와 Zn 노출에 따른 생태독성학적 반응을 연구하였다. 생활사를 고려하여, 생존율, 성장율, 우화율, 성비와 하순기절 기형을 관찰하였다. 장수깔따구 생존율은 Cd와 Zn 노출에 따라 시간, 농도의존적인 경향을 나타냈다. 성장율은 Cd 노출 후 Day 4와 Day 7, 농도의존적인 감소를 보였으며, 고농도인 $50mg\;L^{-1}$에서 대조군에 비해 급격한 감소를 나타냈다. 또한, 우화율은 10, $50mg\;L^{-1}$ Cd에서 대조군에 비해 감소함을 관찰하였다. 성비 변화는 $100mg\;L^{-1}$ Zn에서 암컷의 비율이 증가였으나 농도가 높아짐에 따라 수컷의 비율이 높아짐을 보이며 성비불균형이 관찰되었다. 게다가, 장수깔따구의 하순기절에서는 대조군에 비해 Cd와 Zn 노출된 장수깔따구에서 기형이 관찰되었다. 이와 같은 결과는 수생태계로 유입되는 중금속이 하천의 하상저층에 서식하는 저서무척추동물에게 유해한 영향을 주며, 중금속 노출에 따른 생물학적 분석을 위한 현장 지표종으로서의 가능성을 보여주었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 추계 학술논문 발표대회
• /
• pp.85-88
• /
• 2008

As super-high-strength concrete uses a large amount of binder, there is an autogenous shrinkage strain larger than dry shrinkage and it degrades the quality of structures. Thus, we need a technology to minimize the shrinkage strain of super-high-strength concrete. Accordingly, the present study prepared super-high-strength concrete with design strength of over 100MPa and, using an embedded gauge, measured the shrinkage strain of free shrinkage specimens for super-high-strength concrete containing expansion agent. According to the results of this study, the expansion rate of concrete increased in the early stage due to the admixture of expansion agent, but the shrinkage rate went down with the lapse of time. The effect of the admixture of expansion agent on compressive strength appeared insignificant. Further research shall be made on different kinds of expansion agents and various mixture ratios for basic analysis to reduce autogenous shrinkage of super-high-strength concrete.

• 한국분무공학회지
• /
• 제20권1호
• /
• pp.43-52
• /
• 2015

Experimental study was conducted to investigate the effects of ultra-high injection pressure and nozzle hole diameter on diesel flow and spray characteristics. Electronically controlled ultra-high pressure fuel injection system was made to supply the fuel of ultra-high pressure consistently. Three injection pressures, 80, 160, and 250MPa were applied. Four type of injectors with identical eight nozzle holes were used. The four injectors have nozzle hole diameters of 115, 105, 95, and $85{\mu}m$ respectively. Injection quantity and rate were measured to investigate flow characteristics according to injection pressures and nozzle hole diameters. Mie-scattering and shadowgraph were performed to visualize liquid and vapor phases of diesel spray in a constant volume combustion chamber (CVCC). Ambient conditions of high pressure and high temperature in a diesel engine were simulated by using CVCC.

• The Journal of Korean Physical Therapy
• /
• 제22권1호
• /
• pp.61-66
• /
• 2010

Purpose: The purpose of this study was to investigate the change in sympathetic nervous system responses of healthy adult women with changes in stimulus intensity of high frequency transcutaneous electrical nerve stimulation. Methods: Twenty-four healthy subjects (women) received high frequency electrical stimulation of the forearm. The subjects were randomly assigned to one of two groups; a low intensity stimulation group (n=12) and a high intensity stimulation group (n=12). The electrode attachment was arranged on the forearm of the dominant arm and the electricity stimulus time was 20 minutes. Measured items included skin conductance, pulse rate, skin temperature, and respiration rate. Each was measured at 4 times. Results: Skin conductance and skin temperature showed significant group by time interactions, though there were no significant group and time effects. There were no significant differences according to time, group effect, and a group by time interaction in pulse and respiration rates. Conclusion: High frequency and high intensity electrical stimulation may be helpful for the improvement of sudomotor function through the activation of the sympathetic nervous system. Also, high frequency and low intensity electrical stimulation may be helpful for the reduction of sudomotor function via inhibition of the sympathetic nervous system.

• 한국건축시공학회지
• /
• 제9권2호
• /
• pp.93-101
• /
• 2009

Recently, public interest in housing defects, such as construction errors, occupiers' complaints, faults in production, and so on, is increasing. In addition, the construction requirements of high-rise residential buildings have increased, due to the higher prices of urban areas, especially in metropolitan areas. While previous research has focused on the defects occurring in apartment housing complexes, research has not been carried out on the defects occurring in high-rise residential buildings. In this paper, the defects patterns and characteristics of high-rise residential buildings are examined and analyzed and a defect management plan is then suggested. In order to do this, we collected the defects data of high-rise residential buildings recorded by 2,299 of 2,327 occupants. The defect occurrence rate (DOR) in the residential area is 98.8%. The frequency rate of defect occurrence over the total defect occurrence since building completion is 63.28% during the first year, 24.63% (second year), 6.88% (third year), 2.27% (fourth year), and 2.53% (fifth year). The result of correlation analysis between work types showed that there is a relationship between the built-in furniture and electronics (F&E) and painting works, and the F&E and masonry works, such as marble finishing. We expect that this research will assist in the efforts to decrease the number of defects in high-rise buildings.

• 한국컴퓨터정보학회논문지
• /
• 제20권8호
• /
• pp.61-67
• /
• 2015

The existing methods for control between smart devices in near used Bluetooth, WiFi-Direct, or socket communication using Wi-Fi. However, those have a problem that can not use when operating system of each smart devices is different or when socket server is not working. In this paper, we proposed a new near control technology using High frequencies in audible frequency between smart devices to supplement the problem of existing methods. High frequencies use micro-phone and speaker of smart device and are a control signals that is combined high frequencies within 18kHz ~ 22kHz among audible frequency range. The proposed technology using High frequencies do not need any extra communication modules or socket servers and can use the most smart devices without operating system of devices. To evaluate the performance of the proposed technology, we developed a music play and music control application applied the proposed technology and tested a control experiment using the developed applications. The control success rate was 97% and recognition rate of surrounding people about using high frequencies was under 5%. Therefore, the proposed technology will be the useful technology to control between smart devices in near.

• 열처리공학회지
• /
• 제36권1호
• /
• pp.15-21
• /
• 2023

Recently, ultra-high strength bolts have been developed for weight lightening of a vehicle and fuel efficiency. However, some amount of diffusible H is absorbed into the bolt during its manufacturing process so that H embrittlement (HE) often occurs particularly in high strength bolts with a tempered martensitic microstructure. This brings attention to ultra-high strength pearlitic bolts with a high resistance to HE. Therefore, in this study the HE resistance of the 1.6 GPa grade pearlitic bolt was evaluated through tightening tests and slow strain rate tests (SSRTs), and fracture surfaces of failed bolts were comparatively observed. A critical H content for the tightening test turned out to be ~0.23-0.35 mass ppm. The bolt with a diffusible H content of ~0.35 mass ppm was fractured during the tightening test, showing a quasi-cleavage fracture surface, indicating the occurrence of HE. In addition, the bolt underwent premature elastic failure during the SSRT. This implies that the HE resistance of high strength bolts can be evaluated by both tightening test and SSRT.

• Journal of Nutrition and Health
• /
• 제6권1호
• /
• pp.15-29
• /
• 1973

Albio rats right after weaning, weighing $50{\sim}55g$, were divided into the control, high-carbohydrate-, high-lipid-, and high-protein-fed groups. and were fed for 12 weeks with the respective diets to observe the increase in body weights as well as changes in the chemical constituentes and enzyme activities in the liver tissue, with the following results. (1) There was little difference in the rate of increase in the body weights among the groups, showing normal growth, except the high-protein-fed group which showed decrease in rate of body weight increase from the 7th week after feeding. (2) The liver weight was either increased after 12 weeks of feeding with the high-carbohydrate and high-Lipid diets, or showed no difference with the high-protein diet, as compared to the control weight. (3) The liver cytosol protein content was increased when fed with the high-protein diet, but decreased when fed with the high-carbohydrate and high lipid diets, as compared to the control content. (4) The triglyceride and cholesterol contents in the liver were decreased in the high-protein-fed group, but increased markedly in the high-carbohydrate- and high-lipid-fed groups as compared to the control values. (5) The hepatic glucokinase, G6PD, LDH, and fatty acid synthetase activities were increased in the high-carbohydrate and high-lipid-fed groups, and GOT and CPT activities were increased in the high-protein-fed group. From the above results. it was known that the high-carbohydrate and high-lipid diets stimulated the hepatic lipid metabolism, giving rise to lipogenesis, but the high- protein diet could prevent the lipogeuesis leading to the body weight increase.