• International Journal of Ocean System Engineering
• /
• v.1 no.4
• /
• pp.205-210
• /
• 2011

High data-rate underwater communications is demanded. This demand imposes stringent requirements on underwater communication equipment of phase-locked-loop (PLL). Phase noise in PLL is unwanted and unavoidable. In this paper, we investigate the PLL phase noise effect on high order QAM for underwater communication systems. The phase noise model using power spectral density is adopted for performance evaluation. The phase noise components considered in PLL are reference oscillator, voltage controlled oscillator (VCO), filter and divider. The filters in PLL noise are assumed to be second order active and passive low pass filters. Through simulation, we analyze the phase noise characteristics of the four components and then investigate the performance improvement factor of each component. Consequently, we derive specifications of VCO, phase detector, divider to meet performance requirement of high data-rate communication using QAM under phase noise influence.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.8
• /
• pp.3429-3434
• /
• 2015

Background: This study analyzed predictors of regular mammography performance in Korea. In addition, we determined factors affecting regular mammography performance in life-transition aged women by applying an attitude, social influence, and self-efficacy (ASE) model. Materials and Methods: Data were collected from women aged over 40 years residing in province J in Korea. The 178 enrolled subjects provided informed voluntary consent prior to completing a structural questionnaire. Results: The overall regular mammography performance rate of the subjects was 41.6%. Older age, city residency, high income and part-time job were associated with a high regular mammography performance. Among women who had undergone more breast self-examinations (BSE) or more doctors' physical examinations (PE), there were higher regular mammography performance rates. All three ASE model factors were significantly associated with regular mammography performance. Women with a high level of positive ASE values had a significantly high regular mammography performance rate. Within the ASE model, self-efficacy and social influence were particularly important. Logistic regression analysis explained 34.7% of regular mammography performance and PE experience (${\beta}=4.645$, p=.003), part-time job (${\beta}=4.010$, p=.050), self-efficacy (${\beta}=1.820$, p=.026) and social influence (${\beta}=1.509$, p=.038) were significant factors. Conclusions: Promotional strategies that could improve self-efficacy, reinforce social influence and reduce geographical, time and financial barriers are needed to increase the regular mammography performance rate in life-transition aged.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.53 no.1
• /
• pp.132-138
• /
• 2020

Marphysa sanguinea is the most well-known polychaete species with a high economic value. However, this species has a high mortality in the early rearing stage of aquaculture. This study was conducted to find out the optimal substrate size and organic contents for the growth and survival rate of M. sanguinea larvae and juveniles. It was observed that the smaller grain size (<Ø 0.063 mm) and high organic contents (5-10%) induced settlement and reduced settlement time of larvae. Moreover, the growth and survival rate of larvae reached high levels at Ø 0.004-0.016 mm of grain sizes and 5-7.5% of organic contents as advantageous substrates for settlement. The survival rate of juveniles reached over 90% in less than Ø 0.016 mm substrate on 15-day experiment for different grain sizes of substrates. These results indicated that substrate compositions of less than Ø 0.016 mm of sand size and 5-7.5% of organic contents in mud will enhance the productivity of M. sanguinea at the early stage.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.13 no.2
• /
• pp.85-95
• /
• 2006

Seveval Chinese and Japanese varieties with good characters were used in the breeding. After 5 years (15 generations), a pair of robust and high quality silkworm variety with NPV resistance was bred by means of a combination of crossing and pedigree selection complemented by the selection of NPV resistance. The variety was identified jointly nationwide in 2003 and 2004, and appraised by National Mulberry and Silkworm Appraising Committee. Results are as follows: its cocooning rate is over 93%, shell rate 23-25%, filament length 1200-1300 meters, reelability 75-88%, Length of non-broken cocoon filament 900-1100 meters, raw silk rate 17-19%, neatness 95-97 points, and cocoon crop, cocoon shell weight and raw silk weight per 10000 larvae is higher than those of the control variety by 7-10%, 14-19% and 14-18%, respectively. The variety is not only robust, resistant to high temperature and NPV, easy to rear, uniform in hatching, molting and maturing, but also lays more eggs, and its fecundity is high. It is suitable to rear in the Yangtze River Basin, the Yellow River basin and the Pearl River basin of China.

• Journal of Hydrogen and New Energy
• /
• v.22 no.5
• /
• pp.641-648
• /
• 2011

KEPRI (KEPCO Research Institute) designed and operated the lab-scale high temperature electrolysis (HTE) system for hydrogen production with $10{\times}10cm^2$ 5-cell stack at $750^{\circ}C$. The electrolysis cell consists of Ni-YSZ steam/hydrogen electrode, YSZ electrolyte and LSCF based perovskite as air side electrode. The active area of one cell is 92.16 $cm^2$. The hydrogen production system was operated for 2664 hours and the performance of electrolysis stack was measured by means of current variation with from 6 A to 28 A. The maximum hydrogen production rate and current efficiency was 47.33 NL/hr and 80.90% at 28 A, respectively. As the applied current increased, hydrogen production rate, current efficiency and the degradation rate of stack were increased respectively. From the result of stack performance, optimum operation current of this system was 24 A, considering current efficiencies and cell degradations.

• Journal of Industrial Technology
• /
• v.18
• /
• pp.117-124
• /
• 1998

In recently, according to increase the construction rate of steel bridge, it is necessary to develop the high strength, high toughness steel. Thus, this study show to evaluate the fatigue characteristic of SWS 570 B first used within a country. With the weld-joined compact tension specimens compared with each other, that is, transverse and lengthwise about the crack propagation, high and low in the input heat level, the fatigue test were performed. The log-log curves between the fatigue crack propagation rate da/dN and the transition range of the stress intensity factor ${\Delta}K$ ahead the crack tip were drawed, with these data. By using this curve, we obtained C and m which is material constant from Paris-Erdogan power law. The obtained results from this study indicate that fatigue crack growth rate of SWS 570 B is not influenced by softening effect which occurs in the HAZ(heat-affected zone) when high and low heat input weld is carried out. Softening effects, which affect fatigue properties, are shown that it is not affected to the fatigue growth rates significantly.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.6
• /
• pp.102-109
• /
• 1994

As a fundamental study to apply high pressure injection system to direct injection diesel engine, fuel injection system and constant volume combustion chamber were made and the behaviors of evaporating spray with the variation of injection pressure and the ambient gas temperature were observed by using high speed camera, and the combusion characteristics with the variation of injection pressure and A/F ratio were analyzed. As injection pressure increases, spray tip penetration and spray angle increase and, as a results spray volume increases. This helps an uniform mixing of fuel and air. Spray liquid core length decreases as ambient gas temperature increases, while it decreases as injection pressure increases but the effect of ambient gas temperature is dorminant. As injection pressure increases, ignition delay is shortened and combustion rate being raised, maximum heat release rate increases. It become clear that High injection pressure has high level of potential to improve the performance of DI-diesel engine.

• Journal of Hydrogen and New Energy
• /
• v.32 no.6
• /
• pp.636-641
• /
• 2021

Using numerical analysis, various factors influencing the performance development of high-pressure pumps for Dimethyl Ether (DME) engines were identified and the impact of each factor was evaluated using Taguchi method. DME fuels are more compressive than diesel fuels and have the lower heat generation, so it is necessary to increase the size of the plunger and speed (RPM) of the pump as well. In addition, it is necessary to change the shape and design of control valve to control the discharge flow and pressure. In this study, various variables affecting the performance and flow rate increase of high-pressure pumps for DME engines are planned using Taguchi method, and the best design method is proposed using correlation of the most important variables. As a result, we were able to provide the design value needed for a six-liter engine and provide optimal conditions. The best combination factors to optimize the flow rate at RPM 2,000 and diameter plunger with 20 mm. The regression equation can also be used to optimize the flow rate; -8, 13+0, 2552 RPM +54, 17 diam. Plunger.

• Clinical and Experimental Reproductive Medicine
• /
• v.50 no.1
• /
• pp.63-68
• /
• 2023

Objective: This study compared the outcomes of single blastocyst transfer cycles, using day- 5 poor-quality blastocysts and day-6 high-quality blastocysts. Methods: We analyzed 462 frozen-thawed embryo transfer (FET) cycles performed at our center from January 2014 to December 2019. The cycles were divided into two groups: a day-5 poor-quality blastocyst transfer group (group A) and a day-6 high-quality blastocyst transfer group (group B). The clinical outcomes were tested. Results: In groups A and B, respectively, the clinical pregnancy rate (CPR; 61.65% vs. 67.17%, p=0.258), implantation rate (IR; 61.65% vs. 67.17%, p=0.258), and live birth rate (LBR; 69.51% vs. 77.83%, p=0.134) showed no significant differences. Moreover, when day-3 embryo quality was considered, the CPR, IR, and LBR were also similar in group A and group B (p>0.05). Conclusion: The clinical outcomes of day-5 poor-quality blastocysts and day-6 high-quality blastocysts were similar, suggesting that the developmental speed of the embryo might be more important than embryo quality for the clinical outcomes of single blastocyst transfer in FET cycles.

• Journal of the Korean Society of School Health
• /
• v.4 no.2
• /
• pp.193-215
• /
• 1991

This study is aimed at providing basic information applicable to setting up the education programs and strategies to prevent smoking among high school students by analysing smoking behavior and influencing factors. The samples consisted of 814 students, 557 parents and 362 teachers selected randomly from 8 high schools, one from each school district in Seoul. Date Analyses were made through Chi-Square test, Factor Analysis, One Way ANOVA, Multiple Regression, Correlation. SPSS/$PC^+$program was utilized. Smoking behavior (continuous smoking, re-smoking, ex-smoking, never smoking, daily smoking, occasional smoking) were used as dependent variables. Influencing factors (male students, habits, attitudes and knowledge toward smoking, home life, school life, juvenile delinquency, friendship, demographic parent's and teacher's recognition toward male students smoking) were used as in dependent variables. The major findings of the study are as follows : 1. The total smoking rate occupies 41.1% whereas the continuous smoking rate stands at 19.2%, re-smoking rate 9.5%, ex-smoking rate 12.4% and never smoking rate 58.9%. 2. The total smoking rate among high school students is significantly correlated with their monthly expenditures and type of school (p<0.001). The continuous smoking rate also shows the same tendency. As the length of butt get shorter, the current smoking rate increase. The duration of smoking is in proportion to its continuity. The major motive of smoking is curiousity whereas that re-smoking is to follow friend's behavior. The study shows that peer pressure is the most powerful factor influencing smoking behavior of students. Friends and fellow students encourage to pick up smoking and resume smoking even alter one stops smoking. 3. The correlationship between favorable attitudes toward smoking and the current smoking rate and its continuity is statistically significant(p<0.05, p<0.01, p<0.001). 4. The stability and harmony of family life and the current smoking rate show negative correlationship. The daily smoking amount of father is in proportion to the continuity of students' smoking. When parents are in favor of smoking, it is more likely that the experimental smoking rate increase the smoking rate increases, and vice versa. The more acceptable attitudes toward smoking among siblings is also one of the factors to increase the smoking rate and continuity (p<0.001). The more lenient the attitudes of parents toward their children's association with smoking friends, the higher the smoking rate. When students have difficulties in adjusting to school life, it is more likely that the current smoking rate and continuity increase. 5. The continuity of smoking and friendship are significantly correlated (p<0.05, p<0.01, p<0.001). 6. The continuity of smoking and juvenile delinquency are significantly correlated (p<0.001). 7. The difference in attitudes and smoking reasons of parents and students is significantly correlated to different smoking behavior (p<0.01, p<0.001). While smoking knowledge does not significantly influence their smoking behavior, it is noted that in the case of teachers, smoking reason (p<0.05), attitudes (p<0.001) and knowledge (p<0.05) strongly influence their smoking behavior. 8. There is a significantly correlation among the smoking reasons, attitudes and knowledge between students and parents(p<0.001). As for the correlationship between regularity and smoking amount and other influencing factors, the daily smoking amount is in proportion to depth of inhalation and duration of smoking, negative attitudes of parents unstability of family, dissatisfaction of family members, juvenile delinquency, strong smoking reasons and positive attitudes towards smoking. 9. In the case of daily smokers depth of inhalation is significantly correlated to the duration of smoking, juvenile delinquency, acceptability of parents, dissatisfaction of family members and smoking reasons. The duration of smoking motives is significantly correlated to juvenile delinquency, high acceptability of parents, strong smoking motive and positive attitudes toward smoking. 10. It is noted that 40% of parents and 30% of teachers do not recognize the significant correlationship between and the relative influencing factors mentioned above.