• Journal of Advanced Marine Engineering and Technology
• /
• v.26 no.4
• /
• pp.457-463
• /
• 2002

The closed cycle diesel engine is used in a closed circuit system which has no air breathing. The working fluid as intake mixture are consisted of oxygen, argon and recirculated exhaust gas in order to obtain underwater or underground power sources. In the present study, the high pressure diesel engine which can be operated by the closed cycle system with high intake pressure for increasing the net power rate is designed. It has been carried out to investigate the combustion characteristics of high pressure diesel engine according to the power rate. The maximum cylinder pressure and heat release rate were investigated. Also, major experimental data such as specific fuel consumption rate, oxygen concentrations, fuel conversion efficiency, polytropic exponent, and IMEP were compared with low pressure diesel engine experimental data.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10c
• /
• pp.667-669
• /
• 2004

IEEE 802.15.3 High-Rate WPAN(Wireless Personal Area Network)은 TDMA방식을 사용하며 10m내외에서 멀티미디어와 같은 실시간, 대용량 데이터의 전송을 목적으로 한 기술이다. TDMA방식을 사용하는 기술은 디바이스들이 통신을 하기 전에 미리 채널시간을 할당받아야 한다. IEEE 002.15.3 High-Rate WPAN 환경에서 TCP stream을 전송할 경우 TCP ACK을 전송하기 위해 새로운 채널시간을 할당받아야 한다 송신단은 전송할 데이터와 할당받은 채널시간이 남아있더라도 TCP ACK을 수신할 때까지 아무런 전송도 할 수 없게 된다. 본 논문에서는 High-rate WPAN환경에서 TCP stream을 효과적으로 지원하기 위해 송신단이 할당받은 채널시간동안 송신단과 수신단이 충돌없이 채널을 사용하며 네트워크의 성능을 향상시키는 방법을 제안한다.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1997.03a
• /
• pp.106-110
• /
• 1997

A split Hopkinson bar has been used for obtaining material properties in high strain rate state, In this paper, the apparatus was modified to obtain the high strain rate properties of sheet metal for an autobody. From the experiments with the new apparatus, the material properties of SPCEN in the high strain rate state have been acquired and compared with quasi-static experimental results.

• Proceedings of the Korean Society for Food Science of Animal Resources Conference
• /
• 2004.10a
• /
• pp.310-315
• /
• 2004

The objective of this study was to provide the optimum thawing condition under different level of high pressure(50, 100, 150 and 200 MPa) using high pressure assisted technique which can improve the quality of frozen and thawed pork. The calculated thawing rate from the results depending on the high pressure showed the strong trend of increased thawing rate under pressurized condition(P<0.05). And then, the numerical modeling was executed to predict the thawing rate influenced by the pressure level using exponential regression, LnY=0.70623 + 0.00433 ${\cdot}$ P ($R^2=0.9985$), and it was fairly fit for the functional relation between the thawing rate(Y) and pressure(P) with comparatively high coefficient, $R^2$ of determination.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.268-273
• /
• 2000

Mechanical properties of the materials used for transportations and industrial machinery under high strain rate loading conditions are required to provide appropriate safety assessment to these mechanical structures. The Split Hopkinson Pressure Bar(SHPB) technique, a special experimental apparatus, can be used to obtain the material behavior under high strain rate loading condition. In this paper, dynamic deformation behaviors of the aluminum alloys, Al2024-T4, Al6061-T6 and Al7075-T6, under high strain rate compressive and tensile loading are determined using SHPB technique.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.3
• /
• pp.341-346
• /
• 2017

In this paper, we present a 60 GHz on-off keying (OOK) modulator in a 90 nm CMOS. The modulator employs a current-reuse technique and a switching modulation for low DC power dissipation, high on/off isolation, and high data rate. The measured gain of the modulator, on/off isolation, and output 1-dB compression point is 9.1 dB, 24.3 dB, and 5.1 dBm, respectively, at 60 GHz. The modulator consumes power consumption of 18 mW, and is capable of handling data rates of 8 Gb/s at bit error rate of less than $10^{-6}$ for $231^{-1}$ PRBS over a distance of 10-cm with an OOK receiver module.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.4
• /
• pp.323-327
• /
• 2002

Plant growth and the two components of respiration, growth and maintenance, were compared between low and high nitrogen applications in hydroponic culture on a high-yielding rice cultivar 'Takanari' (Oryza sativa L.). Grain yield decreased by high nitrogen application, and thus this cultivar has low adaptability to nitrogen. Growth efficiency (GE) and net assimilation rate (NAR) were lower in the high-nitrogen plot. The maintenance coefficient (m) and growth coefficient (g) of dark respiration were 0.0111 $d^{-1}$ and 0.196 in the low-nitrogen plot and 0.0166 $d^{-1}$ and 0.237 in the high-nitrogen plot, respectively. Thus, high nitrogen application increased both g and m. Calculated $R_m$ (maintenance respiration rate) was 70 and 90% of total respiration rate at heading, respectively. The significance of nitrogen adaptability and g was discussed.

• Journal of Plant Biology
• /
• v.30 no.2
• /
• pp.135-149
• /
• 1987

An experiment was made in order to analyze the growth characteristics and productivity of Zoysia japonica under control, mowing and TIBA treatment conditions at the experimental farm of Kyung Hee University. The field was planned by the split plot design method and each treatment was given to two plots (40$\times$40 and 100$\times$100 mm) and was replicated three times. Each plot was 9$m^2$ for Zoysia japonica. The sampling of each plot was taken once a week after sowing. In order to know the dry matter of total standing crops, each organ of plants was kept at 9$0^{\circ}C$ and weighed. Total leaf area of a plant was measured by drawing method. The author adopted the growth analysis of English School. Holocellulose analysis by sodium chlorite method was made. The increasing rate of LAI was high in all plots between 10th and 12th week after sowing and high growth rate of assimilatory organ was observed in low density area of TIBA plot. Between 10th and 12th week after sowing all the experimental plots showed high increasing rate of standing crop and in the process of growth each density area of TIBA plot recorded high increasing rate. In all the plots F/C ratio and RGR were high when the growth rate of assimilatory organ was increasing cosiderably, and the higher the planting density was, the higher F/C ratio was recorded. In all the plots NAR recorded maximum rate before the growth period to show a high increase of RGR. In the process of the growth TIBA plot showed high icnreasing rate of NAR. CGR showed high value in high density areas of all the plots and reached its maximum in the 13th week after sowing. Compared to the other experimental areas the low planting density areas of control plot and TIBA plot showed considerable earlier lignification indicating low Holocellulose content in the growth process.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.11
• /
• pp.1043-1048
• /
• 1998

The decomposition performance of the Surface induced Plasma Chemical Processing(SPCP) for benzene, toluene, xylene and $NO_2$ were experimentally examined. Discharge exciting frequency range was 5kHz and 10kHz, and low frequency discharge requires high voltage to inject high electric power in gas and to decompose contaminants. The decomposition rate of dioxide nitrogen for 5kHz power in gas and to decompose contaminants. The decomposition rate of dioxide nitrogen for 5kHz power supply is only 85%, but it’s rate for 10kHz power supply is very high, more than 96% when peak voltage is 12kv. Aromatic hydrocarbon vapor of up to 1000ppm is almost throughly decomposed at the flow rate of 1000$\ell$/min or lower rate under the discharge with electric power of several hundred watts. High decomposition rate is shown in every case, that is, for SPCP reactor is necessary to obtain the decomposition rate of more than 80~98%. The decomposition rate of benzene, toluene and xylene were 90~98% and dioxide nitrogen was 45~96%.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.10a
• /
• pp.321-325
• /
• 2004

Linear motor feed drive systems have been broadly used in machine tools or precision automatic feed systems. Recently, modem machine tools require high speed and high precision feed drive system to achieve high productivity. Unfortunately, a feed drive system, even though it was optimum designed, may experience severe transient vibrations during high-speed operation if its feed rate control is unsuitable. A rough feed rate curve having discontinuity in its acceleration profile causes a serious vibration problem in the feed slides system. This paper presents a feed rate optimization of a machine tool feed slide system, which is driven by a linear motor, for its minimum vibrations. Firstly, a 4-degree-of-freedom lumped parameter model is proposed for the vibration analysis of a linear motor driven machine tool feed drive system. Next, a feed rate optimization of the feed slide is carried out for minimum vibrations. The feed rate curve optimization strategy is to find out the most appropriate acceleration profile with jerk continuity. Of course, the optimized feed rate should approximate to the desired one as possible. A genetic algorithm with variable penalty function was used in this feed rate optimization.