• 한국정밀공학회지
• /
• 제18권1호
• /
• pp.82-88
• /
• 2001

The demands of high data transfer rate and high recording density in optical disk memory device are being increased. In this paper, 4 design parameters for next generation optical disk are investigated. As for the high data transfer rate, two design parameters such as driving acceleration and transmissibility are introduced. As the high recording density is concerned, the minimum linearity and the tilt of the actuator are introduced. Two kinds of pickup actuator are used to evaluate the validity of the parameters through the simulation and the experiment. The 4-wire actuator has good linearity but bad stability and tilt characteristics, while the rotary and axis actuator has good stability for the external vibration but bad linearity. It is demonstrated that the newly proposed design parameters are available to design and evaluate quantitatively the performance of the actuator for the next generation optical disk.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.235-237
• /
• 1998

Gradient coil offers the spatial informations of sample or patient in Nuclear Magnetic Resonance Imaging(NMRI) and its gradient field linearity over the field of view(FOV) has many influence on the MR imaging. Accurate and good quality MR imaging can be acquired by the high gradient field linearity over the FOV. So it is an important part to design of gradient coil with good linearity in the wide imaging range. Usually, Z-directional gradient field is generated by using the Helmholtz type coil which is consisted of one-pair loop with anti-current path. It gets less about 40% linearity of the diameter spherical volume(DSV). In this study, we calculated optimized geometrical parameters of two-pair loop system to cancel odd terms up to $B_7$ included effectively. we also analyzed and compared the gradient field distribution and linearity of the common Helmholtz coil with them of the two-pair loop system.

• 한국전자파학회논문지
• /
• 제15권7호
• /
• pp.713-721
• /
• 2004

본 논문은 InGaP/GaAs HBT를 사용하여 5.4㎓ 대역의 고성능 저잡음 증폭기를 제안하였다. 기존에 InGaP/GaAs HBT는 고전력 증폭기 설계에 주로 사용되어 왔으나, 최근 RF 단일칩화를 위한 소자로 인식되고 있다. 이에 InCaP/GaAs HBT 소자를 이용한 저잡음 증폭기 설계에 대한 연구가 선행되어야 하며, 본 논문에서는 InGaP/GaAs HBT의 우수한 선형성 특성과 잡음 특성을 이용하여 뛰어난 성능의 저잡음 증폭기를 설계 및 제작하였다. 제안된 저잡음 증폭기는 높은 Q의 나선형 인덕터와 MIM 형태의 캐패시터 등의 수동 소자와 능동 소자가 모두 한 칩에 집적화 되어 입출력 패드와 함께 0.9${\times}$0.9$\textrm{mm}^2$의 면적에 집적화 되었다. 제안된 저잡음 증폭기는 최적의 동작점을 선택해 이득과 잡음 지수를 최적화하였으며, 더불어 우수한 선형성을 얻을 수 있었다. 측정결과 제작된 저잡음 증폭기는 13㏈의 이득과 2.1㏈의 우수한 잡음 지수를 보였으며, IIP3 5.5㏈m의 우수한 선형성이 측정되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.888-891
• /
• 2003

This paper describes on the fabrication and characteristics of micro ceramic thin-film type pressure sensors based on Ta-N strain-gauges for high-temperature applications. The Ta-N thin-film strain-gauges are deposited onto thermally oxidized Si diaphragms by RF sputtering in an argon-nitrogen atmosphere($N_2$ gas ratio: 8 %, annealing condition: $900^{\circ}C$, 1 hr.), Patterned on a wheatstone bridge configuration, and use as pressure sensing elements with a high stability and a high gauge factor. The sensitivity is $1.097{\sim}1.21mV/V.kgf/cm^2$ in the temperature range of $25{\sim}200^{\circ}C$ and the maximum non-linearity is 0.43 %FS. The fabricated pressure sensor presents a lower TCR, non-linearity than existing Si piezoresistive pressure sensors. The fabricated micro ceramic thin-film type pressure sensor is expected to be usefully applied as pressure and load sensors that is operable under high-temperature environments.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(2)
• /
• pp.395-398
• /
• 2004

High-linearity voltage-controlled current sources (VCCSs) circuits for wide voltage-controlled oscillator and automatic gun control were proposed. The VCCS consists of emitter follower for voltage input, two common-base amplifier which their emitter connected for current output, and current mirror which connected the two amplifier for large output current. The VCCS used only five transistors and a resistor without an extra bias circuit. Simulation results show that the VCCS has current output range from 0mA to 300mA over the control voltage range from 1V to 4.8V at supply voltage 5V. The linearity error of output current has less than $1.4\%$ over the current range from 0A to 300mA.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.181-184
• /
• 2002

This paper describes fabrication and characteristics of ceramic pressure sensor for working at high temperature. The proposed pressure sensor consists of a Ta-N thin-film, patterned on a Wheatstone bridge configuration, sputter deposited onto thermally oxidized Si membranes with an aluminium interconnection layer. The fabricated pressure sensor presents a low temperature coefficient of resistance, high sensitivity, low non-linearity and excellent temperature stability The sensitivity is 1.097∼1.21 mV/V$.$kgf/$\textrm{cm}^2$ in the temperature range of 25∼200$^{\circ}C$ and the maximum non-linearity is 0.43 %FS.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 추계학술발표대회 논문집
• /
• pp.103-106
• /
• 2005

The material properties of membrane for stratospheric airship is experimentally investigated. Mechanical tensile properties of the membrane material at room, high and low temperature are measured using instron with thermal chamber. Experimentaly, material non-linearity is observed at room and high temperature. In order to simulate material non-linearity caused by the uniaxial extension curve of a woven fabric, the nonlinear hyperelastic problem is considered with finite clement program of ABAQS. Numerical results are compared with experimental results.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권6호
• /
• pp.618-627
• /
• 2005

In this paper, we have compared and analyzed the performance of high amplifier using Doherty technique to improve linearity and efficiency of base station and repeater Power amplifier for WCDMA. This Doherty amplifier implements with 3dB branch line coupler and $90^{\circ}C$ transmission line The phase offset line is designed to maintain the high linearity and efficiency at the low efficiency Period of the power amplifier CW 1-tone experimental results at the WCDMA frequency $2.11{\sim}2.17GHz$ shows that Doherty amplifier which achieves power add efficiency(PAE) of 50% at 6dB back off the point from maximum output power 52.3 dBm, obtains higher efficiency of 13.3% than class AB Finding optimum bias Point after adjusted gate voltage, Doherty amplifier shows that $IMD_3$ improves 4dB.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2006년도 하계학술대회
• /
• pp.205-207
• /
• 2006

In this paper, we present a design procedure of high linearity LNA using CMOS technology. To enhance the low linearity of the inherent CMOS transistor, we adopt the modified derivate superposition with adding external capacitor. The simulation of the designed LNA shows $IIP_3$ of +12-dBm, power gain of 13.8-dB, noise figure of 1.75-dB over the 900 MHz UHF RFID frequencies. The circuit draws the current of 4.2 mA from 1.8-V supply voltage.

• 한국전기전자재료학회논문지
• /
• 제14권5호
• /
• pp.405-409
• /
• 2001

This paper describes fabrication and characteristics of metal thin-film pressure sensor for working at high temperature. The proposed pressure consists of a chrom thin-film, patterned on a Wheat stone bridge configuration, sputter-deposited onto thermally oxidized Si membranes with an aluminium interconnection layer. The fabricated pressure sensor presents a low temperature coefficient of resistance, high-sensitivity, low non-linearity and excellent temperature stability. The sensitivity is 1.097∼1.21mV/V$.$kgf/$\textrm{cm}^2$ in the temperature range of 25∼200$^{\circ}C$ and the maximum non-linearity is 0.43%FS.