• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문발표회
• /
• pp.45-48
• /
• 2003

Most concrete is recently made of an aggregate which is properly absorbed, and carried in it in order to do capability at every fields. We have been close to demand new capability of high flowing and enduring for specific concretes. That is difficult to cope with claiming the efficiency on deterioration from lack of a high quality aggregate. Therefore, For solving the problems we apply to a packing method for using dried materials. That is to say it is a kind of making into an instant. In this study, There is a purpose to present fundamental data, comparing and analyzing a phenomenon about aggregate's absorption following the rate of adding water, for using existing materials.

• 한국건축시공학회지
• /
• 제3권4호
• /
• pp.119-122
• /
• 2003

Most concrete is recently made of an aggregate which is properly absorbed, and carried in it in order to do capability at every fields. We have been close to demand new capability of high flowing and enduring for specific concretes. That is difficult to cope with claiming the efficiency on deterioration from lack of a high quality aggregate Therefore, For solving the problems we apply to a packing method for using dried materials. That is to say it is a kind of making into an instant. In this study, There is a purpose to present fundamental data, comparing and analyzing a phenomenon about aggregate's absorption following the rate of adding water, for using existing materials.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2001년도 학술논문발표회
• /
• pp.148-156
• /
• 2001

The korean Standard of the length of steel bar is 6m and 8m for building structures. This paper is to investigate the length of steel bar to reduce the loss of steel bar comparing with the steel length(6m, 8m) using today. This research shows that using of the others length of steel bar(7m, 9m) is able to reduce the loss up to 2.27%.

• International Journal of Concrete Structures and Materials
• /
• 제6권2호
• /
• pp.65-78
• /
• 2012

An experimental study was carried out to evaluate fresh properties of a moderately high-strength (high-flowing) self-compacting concrete (SCC) and to investigate shear behavior and performance of deep beams made with SCC. Fresh and hardened properties of normal concrete (NC) and SCC were evaluated. The workability and compacting ability were observed based on casting time and number of surface cavities, respectively. Four-point loading tests on four deep beams (two made with SCC and two with NC) were then conducted to investigate their shear behavior and performance. Shear behavior and performance of beams having two different web reinforcements in shear were systematically investigated in terms of crack pattern, failure mode, and load-deflection response. It was found from the tests that the SCC specimen having a normal shear reinforcement condition exhibited a slightly higher load carrying capacity than the corresponding NC specimen, while the SCC specimen having congested shear reinforcement condition showed a similar load carrying capacity to the corresponding NC specimen. In addition, a comparative study between the present experimental results and theoretical results in accordance with ACI 318 (Building Code Requirements for Reinforced Concrete (ACI 318-89) and Commentary-ACI 318R-89, 1999), Hsu-Mau's explicit method (Hsu, Cem Concr Compos 20:419-435, 1998; Mau and Hsu, Struct J Am Concr Inst 86:516-523, 1989) and strut-and-tie model suggested by Uribe and Alcocer (2002) based on ACI 318 Appendix A (2008) was carried out to assess the applicability of the aforementioned methods to predict the shear strength of SCC specimens.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 춘계학술논문 발표대회 제6권1호
• /
• pp.111-114
• /
• 2006

Recently, it is increased on the concern for the reuse of waste concrete because of the shortage of natural aggregate and the increase of waste concrete. And recycled coarse aggregate is used variously, but the existing wet method producted recycled fine aggregate has problem like the high price facilities, the long time progress of the work and the poor of recycled fine aggregate. The aim of this study is to investigate outline and performance evaluation of the drying specific gravity separation method to product high duality recycled fine aggregate. Finally, this study is shown investigate process flowing of drying separation type with gravity manufacture, producte system and function of detail devices. The performance of the method of drying specific gravity separation is certificated as the qualities of recycled fine aggregate satisfied the KS

• 콘크리트학회논문집
• /
• 제16권2호
• /
• pp.147-154
• /
• 2004

국내의 경우 건설생산현장에서 고유동콘크리트의 제조시 주로 나프탈렌계 및 멜라민계가 적용되고 있으며, 또한 최근에는 콘크리트의 요구성능을 확보하기 위하여 이러한 두 성분을 혼합하여 적용하는 사례도 나타나고 있다. 따라서 본 연구에서는 고유동콘크리트의 유동특성에 영향을 미치는 고성능감수제의 구성비율을 비교$\cdot$분석함으로서 혼합형 고성능감수제의 현장적용시 적용방법 및 품질기준 확립을 위한 기초적인 자료를 제시하기 위하여 고성능감수제를 분산제의 구성비율에 따라 N, NM, MN, M의 4수준으로 설정하였다. 그 결과 고성능감수제 구성비율에 따른 페이스트의 유동특성은 나프탈렌의 구성비율이 증가할수록 상대플로우면적비 및 흡착률이 증가하고 있어 유동성이 우수하게 나타났으며 멜라민 구성비율이 증가할수록 점성이 높아지는 것으로 나타났다. 나프탈렌-멜라민 혼합형 고성능감수제의 경우 유동성 및 간극통과성을 포함한 고유동 특성과 응결시간에 있어서 상대적으로 양호한 성능을 나타내고 있어 고유동콘크리트 제조시 고성능감수제를 구성하는 주요성분을 적절하게 혼합하여 사용함으로서 고성능감수제의 효율적인 성능향상이 가능할 것으로 사료된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.241-246
• /
• 1997

This paper tried to catch the fluidity and rheology nature of paste, using the W/P, flay-ash and additional amount of superplasticizing agent as experimental factor. Form result of experiment, as the amount of superplasticizing agent increased, fluidity increased and the rheology decreased. As the substitutional ratio increased fluidity decreased, the rheology tended to increase, additional amount of agent to gain high flowing range is different according to w/p, but this experiment shows about 0.5~1.0% in fly-ash 10~30% substitutional range, 1.0~1.5% in fly-ash 50%.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1995년도 추계학술발표회논문집(1)
• /
• pp.358-363
• /
• 1995

A study on passive cooling systems for concrete containment of advanced pressurized water reactors has been performed. The proposed passive containment cooling system (PCCS) consist of (1) condenser units located inside containment, (2) a steam condensing pool outside containment at higher elevation, and (3) downcommer/riser piping systems which provide coolant flow paths. During an accident causing high containment pressure and temperature, the steam/air mixture in containment is condensed on the outer surface of condenser tubes transferring the heat to coolant flowing inside tubes. The coolant transfers the heat to the steam condensing pool via natural circulation due to density difference. This PCCS has the following characteristic: (1) applicable to concrete containment system, (2) no limitation in plant capacity expansion, (3) efficient steam condensing mechanism (dropwise or film condensation at the surface of condenser tube), and (4) utilization of a fully passive mechanism. A preliminary conceptual design work has been done based on steady-state assumptions to determine important design parameter including the elevation of components and required heat transfer area of the condenser tube. Assuming a decay power level of 2%, the required heat transfer area for 1,000MWe plant is assessed to be about 2,000 ㎡ (equivalent to 1,600 of 10 m-long, 4-cm-OD tubes) with the relative elevation difference of 38 m between the condenser and steam condensing pool and the riser diameter of 0.62 m.

• 콘크리트학회논문집
• /
• 제26권3호
• /
• pp.277-285
• /
• 2014

이 연구는 현장에서 사용하는 재료의 품질 및 계량오차, 현장조건 등에 따라 병용계 자기충전 콘크리트의 유동특성에 영향을 미치는 변동요인의 범위를 실험적으로 규명하기 위한 것이다. 병용계 자기충전 콘크리트의 재료는 벨라이트 시멘트와 석회석 미분말을 사용한 벨라이트계 및 슬래그 시멘트와 석회석 미분말을 사용한 슬래그계가 선정되었으며, 선행연구에서 제시된 최적배합 조건을 대상으로 하였다. 변동요인으로 (1) 콘크리트의 온도 3종류, (2) 잔골재의 표면수율 5종류, (3) 잔골재의 조립률 5종류, (4) 고성능AE감수제의 사용량 5종류, (5) 석회석 미분말의 분말도 3종류 등을 대상으로 민감도 시험을 실시하였다. 민감도 시험의 항목은 슬럼프 플로우, 500 mm 플로우 도달시간, V-깔대기 유하시간, U-box 충전성 높이를 대상으로 하였다. 실험 결과, (1) 콘크리트 온도는 $10{\sim}20^{\circ}C$ 범위, (2) 잔골재의 표면수율은 ${\pm}0.6%$ 범위, (3) 잔골재의 조립률 $2.6{\pm}0.2$ 범위, (4) 고성능AE감수제의 사용량은 ${\pm}0.2%$ 범위, (5) 석회석 미분말의 분말도는 $6000cm^2/g$ 범위에서 현장품질을 관리해야 한다. 벨라이트계 및 슬래그계에 따른 차이는 크지 않았지만, 석회석 미분말 및 $C_2S$ 함량이 높은 벨라이트계가 안정적인 경향을 나타내었다. 따라서 이러한 결과를 현장 시공현장에서 병용계 자기충전 콘크리트의 관리방안으로 제안하고자 한다.

• 한국물환경학회지
• /
• 제34권6호
• /
• pp.678-687
• /
• 2018

The purpose of this study was to understand the unique and complicated feature of urban stream receiving various inflows. The Yangjae stream, the second tier of the Han River, runs through the southern parts of Seoul, Korea and its middle part flows on the boundary of Seoul where land use is actively changing. Stream flow was greatly influenced by rainfall. Other than rainfall events, effluent discharge from wastewater treatment plant (WWTP) comprised 51 % of stream flux. As a result, majority ions water chemistry was changed at the receiving zone of the discharged effluent (Zone A). Its contribution increased to 69.9 % at the second sampling period with low stream flow. In the middle zone, inflows from the northern area, recently developed to a residential district showed low $NO_3-N$ and high $HCO_3$, Ca, $SO_4$, and $SiO_2$ indicating the effects of groundwater and concrete. One inflow (T-8), with extremely high Na and Cl, median $SiO_2$, was assessed to have anthropogenic influence, however its contribution to main stream was under 1 %. Road construction near Y-13 also affected water chemistry leading to the highest Na and Cl concentration. These hydro chemical changes can be critically used to evaluate the changes in water budget and fate of chemicals in a peri-urban watershed occasioned by human activities on the Yangjae.