• 제목/요약/키워드: high cell density cultivation

검색결과 63건 처리시간 0.034초

Methylobacillus sp. SK1의 고농도 유가배양 (High Density Cultivation of Methylobacillus sp. SK1 in Fed-Batch System)

  • 이형춘;이계호김시욱
    • KSBB Journal
    • /
    • 제5권3호
    • /
    • pp.269-277
    • /
    • 1990
  • 메탄올이용균인 Methylobacillus sp. SKI의 균체생산효율을 증대시킬 목적으로 마이크로컴퓨터 제어 배양기를 이용해 고농도 유가배양을 수행하였다. 배양액의 초기 메탄올농도를 1.0%(v/v)로 하여 회분배양할 경우 배양 13시간만에 2.07g/l의 균체농도에 도달하였다. 공기 공급에 의한 유가배양에서 최대교반속도 1200rpm, 최대 공기유량 5.0$\ell$/min의 조건으로 배양시 약 15시간만에 13.7$\ell$/ldml 균체농도에 도달하였다. 산소공급에 의한 유가배양에서 최대교반속도 1200rpm, 공기유량 1.0$\ell$min, 최대산소유량 5.0$\ell$/min의 조건으로 배양시 17시간만에 45.3g/l의 균체농도에 도달하였다. 균의 대수 증식기를 공기공급에 의한 유가 배양으로 회분배양에 비해 약 3시간, 산소공급에 의한 유가배양으로 회분배야에비해 약 3시간, 산소공급에 의한 유가배양으로 회분배양에 비해 약 4시간 더 연장할 수 있었다. 즉, 유가배양로 단시간에 높은 농도의 균체를 얻은 것은 feedback제어에 의해 메탄올을 저해농도 이하로 유지시키면서 용존산소를 한계농도 이상으로 제어함으로써 균의 대수적 증식으로 연장시킨 결과이다. 산소공급에 의한 유가배양중 균체농도 27.6g/l에서 미량원소성분이 결핍되었고, 42.8g/l에서 $Mg^2^+$성분이 결핍되었으므로 배양중에 추가공급되었다.

  • PDF

세라믹 필터를 장착한 생물반응기에서 Bacillus thuringiensis의 성장 특성 모델링

  • 강병철;장호남
    • 한국생물공학회:학술대회논문집
    • /
    • 한국생물공학회 2000년도 추계학술발표대회 및 bio-venture fair
    • /
    • pp.233-236
    • /
    • 2000
  • Bacillus thuringiensis (bt)는 생물학적 살충제 시장에서 가장 널리 사용되는 미생물 살충제이다. Bt의 고농도로 세포배양을 하면 생물반응기에서 원하는 생산물의 농도를 이룰 수 있을 뿐만 아니라 생산물의 생성속도도 이룰 수 있다. 이런 목적 하에서 우리는 세라믹 막 모듈을 반응기 내부에 장착한 새로운 형태의 생물반응기를 개발하였다. 이 새로운 형태의 생물반응기에서 포도당 제한 상태하의 운전을 통해서 bt의 세포와 포자 수율을 현저하게 증가시킬 수 있었다. 최대로 $1.2\;{\times}\;10^{10}\;CFU/ml$의 포자 수율을 달성할 수 있었다. 세라믹 막 모듈 생물반응기에서 포도당 제한 상태 하에서 bt의 성장특성을 연구하였다. 포도당 제한 상태에서는 세포의 성장은 선형 (linear) 성장특성을 보였는데 이것은 간단한 비구조적 수학적 모델의 결과와 잘 일치하였다.

  • PDF

교반형 막 반응기를 이용한 재조합 인간 세포의 무혈청 배지에 의한 $\gamma$-Interferon의 생산 (Economic Production of $\gamma$-Interferon from Recombinant Human Cells in Serum Free Medium by a Moving Aeration Membrane Bioreactor)

  • 박영식;김현규;임서규;박경유;이현용
    • 한국미생물·생명공학회지
    • /
    • 제22권4호
    • /
    • pp.389-394
    • /
    • 1994
  • 8 X 10$^{6}$(viable cells/ml) of maximum cell density and 9000(IU/ml) of $\gamma$-IFN production were obtained at 55(ml/hr) of a perfusion rate by cultivating HSF cells using a moving membrane aeration bioreactor. This system proves to be an efficient culture process by maintaning 90% of viable cells during the whole cultivation periods. The metabolic molar quotient of glucose to lactate was 0.81 for overall ranges of glucose consumed while the evolution of ammonia was not linearly related to the consumption of glutamine. Low molar conversion ratio was observed in low consumptions of glutamine and high molar conversion ratio in high comsumptions. It also shows that the glutamolysis plays important role in the steady state conditions by evolving larger quantities of ammonia than lactate. At the above of 50 rpm, which is the optimum agitation speed for this bioreactor, the cell growth was severely affected while the IFN production was less decrea- sed, maintaing 1.5 X 10$^{-3}$(IU/cell/day) specific IFN production rate. The cumulatvie $\gamma$-IFN production was 7.2 X 10$^{8}$(IU) for 70 days of the cultivation, which yields 1 X 10$^{7}$ (IU/day) of IFN production rate. Therefore, a commercial production of $\gamma$-IFN by this culture process can be achievable by maintaining the above IFN productivity in a scaled-up culture system.

  • PDF

Extracellular Overproduction of $\beta$-Cyclodextrin Glucanotransferase in a Recombinant E. coli Using Secretive Expression System

  • Lee, Kwang-Woo;Shin, Hyun-Dong;Lee, Yong-Hyun
    • Journal of Microbiology and Biotechnology
    • /
    • 제12권5호
    • /
    • pp.753-759
    • /
    • 2002
  • $\beta$-Cyclodextrin glucanotransferase ($\beta$-CGTase) was overproduced extracellularly using recombinant E. coli by transforming the plasmid pECGT harboring a secretive signal peptide. The $\beta$-CGTase gene of alkalophilic Bacillus firmus var alkalophilus was inserted into the high expression vector pET20b(+) containing a secretive pelB signal peptide, and then transformed into E. coli BL2l(DE3)pLysS. The optimum culture conditions fer the overproduction of $\beta$-CGTase were determined to be TB medium containing 0.5% (w/v) soluble starch at post-induction temperature of $25^{\circ}C$. A significant amount of $\beta$-CGTase, up to 5.83 U/ml, which was nine times higher than that in the parent strain B. firmus var. alkalophilus, was overproduced in the extracellular compartment. A pH-stat fed-batch cultivation of the recombinant E. coli was also performed to achieve the secretive overproduction of $\beta$-CGTase at a high cell density, resulting in production of up to 21.6 U/ml of $\beta$-CGTase.

Controlling the surface energy and electrical properties of carbon films deposited using unbalanced facing target magnetron sputtering plasmas

  • Javid, Amjed;Kumar, Manish;Yoon, Seok Young;Lee, Jung Heon;Han, Jeon Geon
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
    • /
    • pp.231.1-231.1
    • /
    • 2015
  • Surface energy, being an important material parameter to control its interactions with the other surfaces plays a key role in bio-related application. Carbon films are found very promising due to their characteristics such as wear and corrosion resistant, high hardness, inert, low resistivity and biocompatibility. The present work deals with the deposition of carbon films using unbalanced facing target magnetron sputtering technique. The discharge characteristics were studied using optical emission spectroscopy and correlated with the film properties. Surface energy was investigated through contact angle measurement. The ID/IG ratio as calculated from Raman spectroscopy data increases with the increase in power density due to the higher number of sp2 clusters embedded in the amorphous matrix. The deposited films were smooth and homogeneous as observed by Atomic force microscopy having RMS roughness in the range of 1.74 to 2.25 nm. It is observed that electrical resistivity and surface energy varies in direct proportionality with operating pressure and has inverse relation with power density. The surface energy results clearly exhibited that these films can have promising applications in cell cultivation.

  • PDF

In Vitro Proliferation Model of Helicobacter pylori Required for Large-Scale Cultivation

  • Oh, Heung-Il;Lee, Heung-Shick;Kim, Kyung-Hyun;Paek, Se-Hwan
    • Journal of Microbiology and Biotechnology
    • /
    • 제10권3호
    • /
    • pp.367-374
    • /
    • 2000
  • The composition of dissolved gases and nutrients in a liquid medium were determined for establishment of the optimum conditions for in vitro culture of Helicobacter pylori. A microaerobic condition facored by the organism was prepared by adjusting the partial pressure of the gas, agitation speed, and viscosity of the medium. The gaseous concentrations were controlled by utilizing CampyPak Plus that reduced oxygen while augmenting carbon dioxide. Agitation of the broth facilitated the oxygen transfer to the cells, yet inhibited the growth at high rates. An increase of viscosity in the medium repressed the culture although this variable was relatively insignificant. The chemical constituents of the liquid broth were examined to establish an economic model for H. pylori cultivation. The microbe required a neutral pH for optimum growth, and yet was also able to proliferate in an acidic condition, presumably by releasing the acidity-modulating enzyme, urease. Cyclodextrin and casamino acid were investigated as growth enhancers in place of serum, while yeast extract unexpectedly inhibited the cells. A low concentration of glucose, the unique carbon source for the organism, increased the cell density, yet high concentrations resulted in an adverse effect. Under optimally dissolved gas conditions, the cell concentration in brucella broth supplemented with serum substitutes and glucose reached $1.6{\times}10^8$ viable cells/ml which was approximately 50% higher than that obtained in the liquid medium added with only cyclodextrin or serum.

  • PDF

저혈청 배지에서 인간 전골수세포(HL-60)를 이용한 tPA 생산과 세포사멸기작에 관한 연구 (The Production of Tissue Type-Plasminigen Activator and Mechanism of Cell Death from Human Promyelocytes(HL-60) in Low Serum Containing Medium)

  • 김현구;성기돈;김태호;안주희;함문선;박진서;이현용
    • 한국미생물·생명공학회지
    • /
    • 제24권1호
    • /
    • pp.126-131
    • /
    • 1996
  • HL-60 was cultivated to produce tPA (tissue-type plasminogen activator) and study the mechanism of cell death. Maximum cell density and tPA production were obtained as $5.27{\times}10^6$ cells/ml and 324ng/ml, respectively under perfusion cultivation. tPA production was enhanced to 420ng/ml in adding 160nM of phorbol ester. The cells were gradually differentiated to granulocytes rather than proliferation. By Fluorescent microscope, apoptosis was prevailed except the death phase and in high agitation speed, but necrosis was prevailed in thawed cells and during the latter periods of the cultivation. It was also proved that tPA was most produced in apoptosis. To obtain higher tPA productivity, the cells must be maintained in apoptosis, not necrosis phase when the cells were dying.

  • PDF

Fermentation Process Development of Recombinant Hansenula polymorpha for Gamma-Linolenic Acid Production

  • Khongto, B.;Laoteng, K.;Tongta, A.
    • Journal of Microbiology and Biotechnology
    • /
    • 제20권11호
    • /
    • pp.1555-1562
    • /
    • 2010
  • Development of the strain and the fermentation process of Hansenula polymorpha was implemented for the production of ${\gamma}$-linolenic acid ($GLA,\;C18:3{\Delta}^{6,9,12}$), an n-6 polyunsaturated fatty acid (PUFA) that has been reported to possess a number of health benefits. The mutated ${\Delta}^6$-desaturase (S213A) gene of Mucor rouxii was expressed in H. polymorpha under the control of the methanol oxidase (MOX) promoter. Without the utilization of methanol, a high-cell-density culture of the yeast recombinant carrying the ${\Delta}^6$-desaturase gene was then achieved by fed-batch fermentation under glycerol-limited conditions. As a result, high levels of the ${\Delta}^6$-desaturated products, octadecadienoic acid ($C18:2{\Delta}^{6,9}$), GLA, and stearidonic acid ($C18:4{\Delta}^{6,9,12,15}$), were accumulated under the derepression conditions. The GLA production was also optimized by adjusting the specific growth rate. The results show that the specific growth rate affected both the lipid content and the fatty acid composition of the GLA-producing recombinant. Among the various specific growth rates tested, the highest GLA concentration of 697 mg/l was obtained in the culture with a specific growth rate of 0.08 /h. Interestingly, the fatty acid profile of the yeast recombinant bearing the Mucor ${\Delta}^6$-desaturase gene was similar to that of blackcurrant oil, with both containing similar proportions of n-3 and n-6 essential fatty acids.

Suspension Culture of Gardenia jasminoides Ellis Cell for Production of Yellow Pigment

  • Kim, Sang-Hwa;Park, Young-Goo;Lee, Yong-Hyun
    • Journal of Microbiology and Biotechnology
    • /
    • 제1권2호
    • /
    • pp.142-149
    • /
    • 1991
  • Gardenia callus was induced in MS medium containing $10{\;}{\mu}M$ of 2,4 diphenoxy acetic acid (2,4-D), $1{\;}{\mu}M$ kinetin, and 3% sucrose in the dark. $B_5$ medium was identified to be the most adequate medium for cell growth. Indole-3-acetic acid (IAA) was better growth regulator than 2,4-D not only for cell growth but slso for carotenoid production. Ligt also played a critical role on synthesis of carotenoid. Gardenia cells grown in $B_5$ medium could utilize a polysaccharide, soluble starch, as a carbon source. The cell growth was stimulated in $B_5$ medium fortified with 0.2% yeast extract. The optimum pH for cell growth was 5.7. High density cultures can be maintained by increasing inoculum size and medium concentration accordingly. Specific growth rate and mass doubling time were 0.095 $day^{-1}$ and 7.3 days, respectively. The cell immobilized in alginate tends to formulate more enlarged vacuoles containing yellow pigment compared with those of suspended cell. Carotenoid content of immobilized cell was about $264.4{\;}{\mu}g/g$ fresh weight (F.W.) corresponding twice of the content of suspended cell ($112.08{\;}{\mu}g/g$ F.W.). The color of gardenia cell was shifted from yellow to red when carbohydrase-secreting fungus, Trichoderma reesei, was co-cultivated with gardenia cells.

  • PDF

An ELISA-on-a-Chip Biosensor System for Early Screening of Listeria monocytogenes in Contaminated Food Products

  • Seo, Sung-Min;Cho, Il-Hoon;Kim, Joo-Ho;Jeon, Jin-Woo;Oh, Eun-Gyoung;Yu, Hong-Sik;Shin, Soon-Bum;Lee, Hee-Jung;Paek, Se-Hwan
    • Bulletin of the Korean Chemical Society
    • /
    • 제30권12호
    • /
    • pp.2993-2998
    • /
    • 2009
  • An enzyme-linked immunosorbent assay (ELISA)-on-a-chip (EOC) biosensor combined with cell concentration technology based on immuno-magnetic separation (IMS) was investigated for use as a potential tool for early screening of Listeria monocytogenes (L. monocytogenes) in food products. The target analyte is a well-known pathogenic foodborne microorganism and outbreaks of the food poisoning typically occur due to contamination of normal food products. Thus, the aim of this study was to develop a rapid and reliable sensor that could be utilized on a daily basis to test food products for the presence of this pathogenic microorganism. The sensor was optimized to provide a high detection capability (e.g., 5.9 ${\times}\;10^3$ cells/mL) and, to eventually minimize cultivation time. The cell density was condensed using IMS prior to analysis. Since the concentration rate of IMS was greater than 100-fold, this combination resulted in a detection limit of 54 cells/mL. The EOC-IMS coupled analytical system was then applied to a real sample test of fish intestines. The system was able to detect L. monocytogenes at a concentration of 2.4 CFU/g after pre-enrichment for 6 h from the onset of cell cultivation. This may allow us to monitor the target analyte at a concentration less than 1 CFU/g within a 9 h-cultivation provided a doubling time of 40 min is typically maintained. Based on this estimation, the EOC-IMS system can screen and detect the presence of this microorganism in food products almost within working hours.