• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.910-920
• /
• 2008

In Korea, more than 70% of the territory consists of mountains. Therefore, the construction of roads and railways has generally involved with a steep rock slope in which the event of rockfalls are often occurred due to the weathered rock conditions and rainfalls etc. This is dangerous when the rock falls into the road and railway on which vehicles and trains are running. In order to prevent such rockfalls, the rockfall protection fence consisting of post, wire rope, and PVC coating steel net has most used at the bottom of rock slopes. In a general practice, an absorbing rockfall energy, 50kJ is specified by the Ministry of Construction and Transportation. However, questions still remain about whether the rockfall protection fence works effectively or not. In this study, a typical wire rope used in the standard rockfall protection fence was replaced by the high carbon steel wire rod and to validate its capacity of rockfall energy absorbing the field rockfall tests were conducted. The testing results show that a new rockfall protection fence using the high carbon steel wire rods can absorb the rockfall energy more than 50kJ and 20% of construction cost was saved in comparison with the previous rockfall protection fence.

• 한국지반환경공학회 논문집
• /
• 제10권6호
• /
• pp.49-60
• /
• 2009

본 연구는 기존의 낙석방지울타리에 적용되는 와이어로프를 경강선으로 대체하고 소재 및 체결부에 대한 실내성능실험과 더불어 현장에서의 수직낙하시험을 통해 전체적인 에너지 흡수능력을 평가하여 새로운 낙석방지울타리를 개발하는데 있다. 12단 경강선 적용 낙석방지울타리의 수직낙하시험 결과, 국내 낙석방지울타리에 기준으로 적용되는 흡수에너지인 50kJ 이상의 에너지를 흡수하는 것으로 나타났다. 또한 경강선 단수가 12단에서 16단으로 증가함에 따라 에너지 흡수능력도 향상되었다. 이러한 새로운 낙석방지울타리를 도로공사 절취사면 현장에 성공적으로 적용하였다. 그 결과, 시공성은 기존에 비해 별차이가 없는 것으로 나타났으나 미관상 전체적으로 심플하고 깨끗한 이미지를 연출할 수 있었다. 경제성 분석결과에 있어서는 전체 건설비용에 있어 기존 대비 약 20% 정도 절감되는 것으로 나타났다.

• 열처리공학회지
• /
• 제36권4호
• /
• pp.230-236
• /
• 2023

The current study deals with the effect of cooling rate and temperature for annealing on medium-carbon Cr-Mo alloy steel, especially for cold heading quality wire rod, to derive the optimum micro-structures for plastic deformation. This is to optimize the spheroidization heat treatment conditions for softening the material. Heat treatment was performed under seven different conditions at a temperature between A_c1 and A_c3, mostly within 720℃ to 760℃, and the main variables at this time were temperature, retention time and cooling rate. Microstructure and phase changes were observed for each test condition, and it was confirmed that they were greatly affected by the cooling rate. It was also confirmed that the cooling rate was changed in the range of 0.1℃/min to 5℃/min and affected by phase deformation and spheroidization fraction. The larger the spheroidization fraction, the lower the hardness, which is associated with the increasing connection of ferrite phases.

• 한국생산제조학회지
• /
• 제21권4호
• /
• pp.677-682
• /
• 2012

For the product with small diameter, long column, and parabolic shape, the forging formability of the high-carbon steel wire rod was investigated in this study. By using the three-dimensional finite element method, the formability of wire was reviewed by forming analysis for the desired parabolic shape of local part. Analysis results due to forging direction, forging velocity, friction coefficient and constraint location were also investigated. On the basis of these results, it is noted that the forging direction has the big influence when the product with long column is forged. As the forging velocity increases, buckling tends to be limited and formability of parabolic shape is improved. By constraining the lower parabolic shape part to suppress plastic strain, the effect depending on friction coefficient is not almost appeared. And good parabolic shape is obtained at the region of the forging velocity of more than 0.5 m/s.