• IE interfaces
• /
• v.23 no.2
• /
• pp.108-117
• /
• 2010

Wireless sensor network may be installed where it is hard to access or where one has to constantly gather data without any human's monitoring. Sensors which compose a sensor network are usually small with poor battery capacities and thus energy-efficient usage is very important because of difficulties in replacing or recharging the batteries to make the lifetime of the whole sensor network longer. LEACH protocol, a well-known hierarchical routing protocol, may resolve this problem by distributing the role of cluster header evenly to the sensor nodes in the whole area of network at each round. In this thesis, we introduce a variant of LEACH protocol which considers the distance between base station and sensors in the way that if a node is far from the base station then the probability that this node becomes a cluster header is low. Experiments to evaluate the energy efficiency and the ability to collect the information show that the proposed method in this paper has maintained much wider sensing area while keeping the energy efficiency same as LEACH.

• Convergence Security Journal
• /
• v.9 no.2
• /
• pp.71-78
• /
• 2009

It is very difficult to apply previous security protocols to WSNs(Wireless Sensor Networks) directly because WNSs have resource constrained characteristics such as a low computing ability, power, and a low communication band width. In order to overcome the problem, we proposes a secure group communication scheme applicable to WSNs. The proposed scheme is a combined form of the TEEN(Threshold sensitive Energy Efficient sensor Network protocol) clustering based hierarchical routing protocol and security mechanism, and we assume that WSNs are composed of sensor nodes, cluster headers, and base stations. We use both private key and public key cryptographic algorithms to achieve an enhanced security and an efficient key management. In addition, communications among sensor nodes, cluster headers, and base stations are accomplished by a hierarchical tree architecture to reduce power consumption. Therefore, the proposed scheme in this paper is well suited for WSNs since our design can provide not only a more enhanced security but also a lower power consumption in communications.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.3
• /
• pp.121-129
• /
• 2011

One of the major challenges of minimum energy consumption for wireless sensor networks(WSN) environment. LEACH protocol is hierarchical routing protocol that obtains energy efficiency by using clustering. However, LEACH protocol in each round, because the new cluster configuration, cluster configuration, whenever the energy consumed shorten the life of the network. Therefore in this paper, the cluster is formed in WSN environment in early stage and the problems with energy waste have been solved by selecting C-node. In the initial round of proposed model uses 26 percent more than traditional LEACH energy consumption. However, as the round is ongoing, it has been proved by the network simulation tool that the waste of energy could be diminished up to 35%.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.2B
• /
• pp.82-89
• /
• 2008

Mobile IP is the basic solution to provide host mobility, whereas network mobility refers to the concept of collective mobility of a set of nodes. In a network mobility scenario, mobile networks can be nested in a hierarchical form. That situation is referred to a nested mobile network Nested mobile networks exhibit the pinball routing problem, which becomes worse in proportion to the number of nested levels in the hierarchy. In this paper, we propose a routing optimization scheme having backward compatibility to the basic network mobility protocol and concerning heterogeneity of nested mobile network, also we perform comparison and analysis of proposed schemes.

• Journal of the Korea Society for Simulation
• /
• v.16 no.3
• /
• pp.49-56
• /
• 2007

There are many application areas of wireless sensor networks, such as combat field surveillance, terrorist tracking and highway traffic monitoring. These applications collect sensed data from sensor nodes to monitor events in the territory of interest. One of the important issues in these applications is the existence of the radio-jamming zone between source nodes and the base station. Depending on the routing protocol the transmission of the sensed data may not be delivered to the base station. To solve this problem we propose a genetic algorithm based routing method for reliable transmission while considering the balanced energy depletion of the sensor nodes. The genetic algorithm finds an efficient routing path by considering the radio-jamming zone, energy consumption needed fur data transmission and average remaining energy level. The fitness function employed in genetic algorithm is implemented by applying the fuzzy logic. In simulation, our proposed method is compared with LEACH and Hierarchical PEGASIS. The simulation results show that the proposed method is efficient in both the energy consumption and success ratio of delivery.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.11
• /
• pp.1431-1439
• /
• 2016

In this paper, we propose a new location service and location-based routing for data dissemination from a source to a mobile group sink in less energy consumption of the sensor node. Unlike the existing protocols, the proposed protocol uses a leader sink instead of a group area as the location information to represent a mobile sink group. The proposed protocol also uses grid leaders on virtual grid structure to support sink mobility in location service. By using a leader sink as a representative and grid leaders for mobility supporting, the proposed protocol can exploit an efficient hierarchical location service and data dissemination method without using flooding. Accordingly, the proposed protocol carries out upper layer location services and data dissemination between a leader sink and a source and lower layer location services and data dissemination between the leader sink and member sinks. Simulation results demonstrate that the proposed protocol achieves energy-efficiency.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.10
• /
• pp.47-54
• /
• 2013

In this paper, the structural design of optical Internet is analyzed and by using UNI (User Network Interface) signaling protocol an optical transmission experiment was performed. The hierarchical structure of the basic optical Internet consists of the backbone network, the service network and the access network. The necessary functions for each layer were described as follows: Control structure of the optical transport layer, network operation and management structure, internetworking technology of sub networks, routing and signaling technology. By using UNI signaling protocol from OIF (Optical Internetworking Forum), the optical transmission in the proposed structure of the optical Internet network was experimented. By the traffic generation of LSP (Label Switched Path) data packets along the route-configuration was delivered to UNI. Finally, by showing the value of TCP (Transmission Control Protocol) packets the optical transmission was completely and successfully demonstrated.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.11A
• /
• pp.1147-1158
• /
• 2006

Clustering algorithm is an essential element to implement a hierarchical routing protocol, especially for a large-scale wireless sensor network. In this paper, we propose a new type of energy-efficient clustering algorithm, which maximizes the physical distance between cluster head and gateway by a neighbor node discovery mechanism. Furthermore, a slave/master patching scheme is introduced as a useful means of further improving the energy-efficiency. It has been shown that the number of cluster heads can be reduced by as many as 21% as compared with the existing clustering algorithms.

• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.163-166
• /
• 2003

In recent years, there has been increased to access multimedia service through the Internet due to rise of the access speed. We suppose the co-existence of the various access networks in adjacent area in the future, such as wireless LAN, Bluetooth, and 3G Cellular So, the size of the cell will be smaller and the number of access point will be increased. In other words, the potable devices need the efficient mobility scheme due to move between cells frequently Currently, the several of the scheme, which is Cellular IP, HAWAII, Mobile IPv4 regional registration, and hierarchical Mobile IPv6, is suggested to support micro-mobility but Mobile IPv4 is standard scheme to support the mobility of the mobile node. MPLS, which forwards the packet through switching instead of routing using IP address, has begun to deploy in the internet backbone to increase the performance of mobility protocol. The integration of both MPLS and Mobile IP improves the scalability of the Mobile IP data forwarding process by leveraging on the features MPLS which are fast switching and high scalability. Moreover it abbreviates IP-in-IP tunneling between HA and FA. In this paper, we suggest efficient mobility scheme through integration of both MPLS and hierarchical Mobile IPv6.

• The KIPS Transactions:PartC
• /
• v.11C no.7 s.96
• /
• pp.895-904
• /
• 2004

Due to the frequent and unpredictable topology changes, multicast still remains as challenge and no one-size-fits-all protocol could serve all kinds of needs in mobile ad hoc network. In this paper, we propose a novel scheme of Hierarchical Eulerian Ring Oriented Multicast Architecture (HEROMA) over mobile ad hoc network. It has features that concentrate on efficiency and robustness simultaneously. It is also an application-driven proposal for hazard detection. Architectures including Eulerian ring, hierarchy and multicast agent are investigated in detail Simulation results different level of improvements on control traffic, end-to-end delay and packet delivery ratio by comparing with tree-based and mesh-based multicast protocols.