• Journal of Korean Ophthalmic Optics Society
• /
• v.7 no.1
• /
• pp.15-20
• /
• 2002

The Hydroxyethyl methacrylate(HEMA) was developped in 1960's and later the use of contact lenses increased. At present more and more people use RGP contact lenses. Due to the wide range of optical corrections available and due to their high oxygen transmission Japanese and Korean people like them. Nevertheless one of nine CL users(beginners) stopped wearing the CL within the first year. We conducted a survey to evaluate the level of patient compliance in lens care and maintenance and to assess practitioner knowledge of contact lens information. Generally 6% of contact lens wearers drop out per year. The aim of this research was to find out what opticians can do to reduce the drop-out rate by getting information on handling, on general data of the patient and on optical prescription. Lens wearer were asked to complete a 10 question survey that focused on lens care-wear modality, lens replacement, storage, symptoms and case disinfection. There were total 180 participants in the study. Most of contact lens wearers have an inadequate understanding of contact lens care system. Therefore, it is important that contact lens specialists place more emphasis on practitioner education about general contact lens fields and reinforce patient education during the dispensing visit.

• Restorative Dentistry and Endodontics
• /
• v.32 no.3
• /
• pp.236-247
• /
• 2007

The purpose of this study was to evaluate the effects of cyanate methacylate on the shear bond strengths to bovine dentin surfaces as a dentin primers. Seven experimental adhesives were made with different mass fraction of Isocyanatoetylme-thacrylate (IEM), 40wt% HEMA (Wako Pure Chemical Industries Osaka, Japan), 0.6% camphoroquinone, 0.4% amine and ethanol as balance dentin bonding agents (0, 2, 4, 6, 8, 10, 12%) were made and applied on the surface of bovine dentin specimens of 7 experimental groups. Shear bond strengths were measured using a universal testing machine (Instro 4466). To identify the ratio and modes of cohesive failures, microscopic examinationn was performed. The ultra-structure of resin tags were observed under scanning electron microscope. The results were as follows ; 1) A higher shear bond strengths (33.62 MPa) in group 8% of Cyanate methacrylate to dentin were found, but there were no statistically significancy between Groups (p > 0.05). 2) The higher ratio of cohesive failures mode in group 2, 6, an 10% could be seen than that in any other groups. 3) A shorter resin tags were observed in all experimental groups. This could be resulted that the preventing from the cyanate methacrylate penetrate into dentin owing to reacting it with dentin collagen. Therefore the resin tags were shorter in lengths. Whether the higher bonding strengths of dentin bonding agents can be affected was not been assured with statistic results. The results indicated that the relation between tensile strengths of the dentin adhesives to bovine dentin and resin tags formed into the dentin could not affected. The main reason of increasing the shear bond strength to bovine dentin in experimental groups could not be assured.

• Journal of Korean Ophthalmic Optics Society
• /
• v.20 no.4
• /
• pp.437-443
• /
• 2015

Purpose: This study evaluated the optical and physical and characteristics of soft contact lens polymerized with addition of 3-chloropyridine-4-carboxylic acid and 3-fluoropyridine-4-carboxylic acid in the basic hydrogel contact lens material. In particular, the utility of 3-chloropyridine-4-carboxylic acid and 3-fluoropyridine- 4-carboxylic acid as a hydrogel contact lens material was investigated. Methods: In this study, 3-chloropyridine-4-carboxylic acid and 3-fluoropyridine-4-carboxylic acid were used as additives. Also, 2-hydroxyethyl methacrylate, acrylic acid, methyl methacrylate and a cross-linker EGDMA were co-polymerized in the presence of AIBN as an initiator. Results: The physical properties of the produced polymers were measured as followings. The water content of 34.54~37.15%, refractive index of 1.4320~1.4342, tensile strength of 0.2872~0.3608 kgf and contact angle of $57.82{\sim}79.57^{\circ}$, UV-B transmittance of 76.8~82.4% and UV-A transmittance of 84.6~86.6% were obtained respectively. Conclusions: Based on the results of this study, contact lens material containing 3-chloropyridine-4-carboxylic acid and 3-fluoropyridine-4-carboxylic acid is expected to be able to used as a material for high wettability and UV-block hydrogel contact lens.

• Tuberculosis and Respiratory Diseases
• /
• v.86 no.4
• /
• pp.284-293
• /
• 2023

Background: Attitudes towards smoking, lung cancer screening, and perceived risk of lung cancer have not been widely studied in Malaysia. The primary objective of this study was to describe the factors affecting the willingness of high-risk current smokers and ex-smokers to undergo low-dose computed tomography (LDCT) screening for lung cancer. Methods: A prospective, cross-sectional questionnaire study was conducted in current smokers or ex-smokers aged between 55 and 80 years at three hospitals in Kota Kinabalu, Sabah, Malaysia. The questionnaire recorded the following parameters: perceived lung cancer risk; Prostate Lung Colon Ovarian Cancer 2012 risk prediction model excluding race and ethnicity predictor (PLCO_m2012norace); demographic characteristics; psychosocial characteristics; and attitudes towards lung cancer and lung cancer screening. Results: A vast majority of the 95 respondents (94.7%) indicated their willingness to undergo screening. Stigma of lung cancer, low levels of knowledge about lung cancer symptoms, concerns about financial constraints, and a preference for traditional medication were still prevalent among the respondents, and they may represent potential barriers to lung cancer screening uptake. A desire to have an early diagnosis (odds ratio [OR], 11.33; 95% confidence interval [CI], 1.53 to 84.05; p=0.02), perceived time constraints (OR, 3.94; 95% CI, 1.32 to 11.73; p=0.01), and proximity of LDCT screening facilities (OR, 14.33; 95% CI, 1.84 to 111.4; p=0.01) had significantly higher odds of willingness to undergo screening. Conclusion: Although high-risk current smokers and ex-smokers are likely to undergo screening for lung cancer, several psychosocial barriers persist. The results of this study may guide the policymakers and clinicians regarding the need to improve lung cancer awareness in our population.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.29 no.1
• /
• pp.37-44
• /
• 2013

Sodium hypochlorite and ethylene diamine tetra acetic acid are substances usually used during endodontic treatment. Several studies found that the bonding was negated with certain irrigants and some of the used irrigants have demineralizing and chealating effects, so it was advocated to omit the etching step in etch and rinse adhesive systems. The purpose of this in vitro study was to evaluate the influence of NaOCl & EDTA on the bonding strength of ethanol wet bonding. Thirty human molars were selected and mesiodistally sectioned into halves, thus providing sixty specimens. The specimens were randomly assigned to 4 groups(n=15) according to the irrigant regimen used : (1) irrigated with distilled water for 10min (control); (2) irrigated with 5.25% NaOCl(10min), flushed with 5.25% NaOCl(1min) (3) irrigated with 5.25% NaOCl, flushed with 17% EDTA (4) irrigated with 5.25% NaOCl, flushed with 17% EDTA. Each group was acid-etched with 37% phosphoric acid(except group 4) and had their dentin surfaces dehydrated with ethanol solutions : 50%, 70%, 80%, 95%, 3x100%, 30s for each application. After dehydration, a primer( 50% all bond 3 resin + 50% ethanol) was used, followed by the adhesive(ALL-BOND 3 RESIN) application. Resin composite build-ups were then prepared using an incremental technique. Specimens were sectioned into beams and submitted to a tensile load using a Micro Tensile Tester(Bisco Inc.). The data were statistically analyzed using one-way ANOVA and Tukey HSD at p<0.5 level. There was no significant difference on G1(control) and G2(irrigated with NaOCl only ). (p>0.05). G3(flushed with EDTA) showed significantly high tensile bonding strength compared to the G2 (p<0.05). G4( treated with EDTA but no acid-etching) was significantly lower value than G3. (p<0.05) Although there was no significant difference, 5.25% NaOCl seemed to have an adverse effect on the bonding strength of ethanol wet bonding. The flushing with EDTA after NaOCl irrigation prevents the decrease of bonding strength. The use of 17% EDTA as a final flush can enhance the bonding strength but EDTA flushing can't substitute for a acid-etching.

• Journal of Veterinary Clinics
• /
• v.22 no.2
• /
• pp.94-99
• /
• 2005

This prospective study aimed to assess the efficacy of dexamethasone to prevent xylazine induced emesis in dogs. The antiemetic effect of graded, single high-dose intravenous dexamethasone against xylazine hydrochloride was studied. Clinically healthy mixed breed dogs that weighed $ 4.64\pm1.25kg$ were used in this study. Food and water were given 3 hours before the experiment. Venous blood specimens were collected from all experimental animals for hema-tological and blood chemical test pre- and post-experiment. Twenty-eight experimental animals were randomly divided into 4 groups; the group treated with 0.2ml/kg of normal saline (Control group), the groups treated with 1mg/kg (D1 group), 2mg/kg (D2 group) and 4 mg/kg of dexamethasone (D4 group). Three doses of the dexamethasone or normal saline was administered intravenousely to each group and after 5 minutes, xylazine (2.2 mg/kg) was administered intramuscularly. The time until onset of the first emetic episode and rate of emesis were investigated. At the same time, the extent of sedation was scored subjectively 5, 15, 30 and 60 minutes after injection of xylazine hydrochloride using Visual Sedation Score. The time until onset of the first emetic episode was $203.25\pm11.35$ sec in Control group, $187.33\pm48.0l$ sec in D1 group and 218.33± 13.58 sec in D2 group. The rate of xylazine induced emesis were $57\%$ in Control group and $43\%$ in D1 and D2 group respectively. On the other hand, any emetic episodes were not observed in 04 group. At extent of sedation score, all experimental animals especially including the animals in D1 group were highly sedated at 15 minutes after administration of xylazine hydrochloride. Hematological and blood chemical values showed normal ranges pre- and post-experiment. We concluded that prior treatment with 4 mg/kg of dexamethasone hardly caused xylazine-induced emesis without disturbing the sedative effect of xylazine in dogs.

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.3
• /
• pp.369-378
• /
• 2003

Statement of Problem: Recently, resin cements have become more widely used and have been accepted as prominent luting cements. Current resin cements exhibit less microleakage than conventional luting cements. However, the constant contact with water and exposure to occlusal forces increase microleakage even in resin cements inevitably. Most bonding resins have been modified to contain a hydrophilic resin such as 2-hydroxyethylmethacrylate (HEMA) to overcome some of the problems associated with the hydrophobic nature of bonding resins. By virtue of these modifications, bonding resins absorb a significant amount of water, and there may also be significant stresses at bonding interfaces, which may adversely affect the longevity of restorations. Therefore the reinforcement of water stability of resin cement is indispensable in future study. Purpose: This study was conducted to examine the influence of water retention on microleakage of two resin cements over the period of 6 months. Materials and Methods: 32 extracted human teeth were used to test the microleakage of a single full veneer crown. Two resin cements with different components and adhesive properties - Panavia F (Kuraray Co., Osaka, Japan) and Super-Bond C&B (Sun Medical Co., Kyoto, Japan)- were investigated. The storage medium was the physiological saline solution changed every week for 1 month, 3 months, and 6 months. One group was tested after storage for 1 day. At the end of the each storage period, all specimens were exposed to thermocycling from $5^{\circ}C$ to $55^{\circ}C$ of 500 cycles and chewing simulation of 50,000 cycles, and then stained with 50% silver nitrate solution. The linear penetration of microleakage was measured using a stereoscopic microscope at ${\times}40$ magnification and a digital traveling micrometer with an accuracy of ${\pm}3{\mu}m$. Values were analyzed using two-way ANOVA test, Duncan's multiple range tests (DMRT). Results : Statistically significant difference of microleakage was shown in the 3-month group compared with the1-day or 1-month group in both systems (p<0.05) and there were statistically significant differences in microleakage between the 3-month group and the 6-month group in both systems (p<0.05). The two systems showed different tendency in the course of increased microleakage during 3 months. In Panavia F, microleakage increased slowly throughout the periods. In Super-Bond C&B, there was no significant increase of microleakage for 1 month, but there was statistically significant increase of microleakage for the next 2 months. For the mean microleakage for each period, in the 3-month group, microleakage of Super-Bond C&B was significantly greater than that of Panavia F. On the other hand, in the 6-month group, microleakage of Panavia F was significantly greater than that of Super-Bond C&B (p<0.05). Conclusion: Within the limitation of this study, water retention of two different bonding systems influence microleakage of resin cements. Further studies with the longer observation periods in viro are required in order to investigate water stability and the bonding durability of the resin cement. CLINICAL IMPLICATIONS Microleakage at the Cement-tooth interfaces did not necessarily result in the failure of the crowns. But it is considered to be a major factor influening the longerity of restorations. Further clinical approaches for decreasing the amount of microleakage are required.