• 설비공학논문집
• /
• 제14권3호
• /
• pp.231-239
• /
• 2002

Experiments on the single phase cooling heat transfer and pressure drop with microfin tubes were performed using water as a test fluid. Experimental data were obtained in the range of Reynolds number 3000 ~40000 and Prandtl number 4-6. The data of microfin tubes presented the characteristics of rough surface tube in pressure drop and heat transfer Experimental data were compared with the heat transfer and friction factor correlations of smooth tubes. Heat transfer enhancements of microfin tubes were lower than pressure drop penalty factors. The helix angle is more significant parameter in both of the pressure drop and heat transfer than the relative roughness. The correlations of Nusselt number and friction factor were suggested for the tested microfin tubes. Maximum deviations between correlations and experimental data were within $\pm15$% for Nusselt number and $\pm10$% for friction factor.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.28-33
• /
• 2001

Screw conveyors are used extensively in industrial for conveying and elevating materials. Despite their apparent simplicity, the mechanics of the conveying action is very complex. so many engineers depend on experiential data. Capacities of screw are pumping, steady flow of polymer melts, steady volumetric throughput etc. they are affected by geometry of screw, heat flux, pressure on inside barrel, rotating velocity, friction coefficient at screw surface etc. by computation volumetric efficiency increases as rotating velocity increases and decreases as friction coefficient increases. also it decreases with short pitch length. and double flight screw is more effective than single flight screw. The temperature of polymer melts by heating pad and injection pressure play a very important role in the injection molding machine. so in this paper we analyze thermal distortion and stress of screw includes pressure and temperature distributions by finite element analysis to understand what design factors influence on volumetric throughput efficiency of the screw and thermo-mechanical characteristics of screw.

• 한국의류학회지
• /
• 제18권4호
• /
• pp.443-451
• /
• 1994

The bending rigidity of yarn is derived in terms of physicil and mechanical characteristics of its constituent fibers and yarns structural parametrs. Theoretical analysis shows that the twist correcti on factor for the bending rigidity of yarn decreases with increase of the ratio of Young's m()dulus to the shear modulus of the constituent fibers. Also, the bending rigidity of yarn decreases as the surface helix angle of yarn increases.

• 한국정밀공학회지
• /
• 제20권8호
• /
• pp.39-46
• /
• 2003

Productivity and machining performance can be improved by cutting analysis including cutting force prediction, surface error prediction and machining stability evaluation. In order to perform cutting analysis, cutting force coefficients database have to be constructed. Since cutting force coefficients are dependent on cutting condition in the existing research, a large number of calibration tests are needed to obtain cutting force coefficients, which makes it difficult to build the cutting force coefficients database. This paper proposes a generalized method for constructing the cutting force coefficients database us ins cutting-condition-independent coefficients. The tool geometry and workpiece material were considered as important components for database construction. Cutting force coefficients were calculated and analyzed for various helix and rake angles as well as for several workpiece. Furthermore, the variation of cutting force coefficients according to tool wear was analyzed. Tool wear was found to affect tool geometry, which results in the change of cutting force coefficients.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 2004년도 춘계 학술발표회 논문집
• /
• pp.219-224
• /
• 2004

The present study was to investigate the heat transfer enhancement effect of coil wire fins in an ice storage system. For the two cases of tubes with internal brine flows, a finned tube with coil wires on its outer surface and a smooth tube, the rates of ice layer were tested and compared for both the icing processes. The coil fins were made of a stainless steel wire with a dia. of 2.0(mm), and the coil had an outer dia. of 10(mm) and a helix angle of 60($^{\circ}$). The experimental results showed that the coil fins could substantially reduce the thermal resistance of the ice layer, and enhance the heat flow rates between the water in the storage tank and the brine. The ice storing time was found to be shortened by 13(%) for the coil fins to get the same amount of ice layer that was built on the smooth tube wall for 10 hours of operation when the same thermal conditions were provided.

• Journal of Plant Biology
• /
• 제38권4호
• /
• pp.359-364
• /
• 1995

As the first step to elucidate the relationship between the structure and function of CTP:phosphocholine cytidylyltransferase (EC 2.7.7.15) in plants, the partial nucleotide sequence of soybean cytidylyltransferase cDNA was determined using a polymerase chain reaction (PCR). Degenerate oligonucleotide primers were synthesized from the conserved region revealed from the rat and yeast cytidylyltransferase DNA sequences. The catalytic domain region showed 78 and 76% homology with the rat and yeast amino acid sequences, respectivly. The hydropathy profile indicated that the C-terminal non-catalytic portion of the protein was very hydrophilic, and in the region between the catalytic domain and the C-terminal region, there was a large amphipathic $\alpha$-helical domain that was believed to bind the membrane surface in the active formation. There are 7 potential sites for phosphorylation by protein kinase C and 4 potential sites for phosphorylation by Ca2+/calmodulin kinase within the determined sequence.

• Preventive Nutrition and Food Science
• /
• 제4권2호
• /
• pp.139-144
• /
• 1999

Lipoprotein lipase (LPL) I san enzyme that catalyzed the hydrolysis of triacylglycerols of chylomicrons and VLDL to produce 20acylglycerols and fatty acids. The enzyme, LPL, is localized on the surface of the capillary endothelium and is widely distributed in extrahepatic tissues including heart, skeletal muscle and adipose tissue. LPL has been isolated from boving milk by affinity chromatography on heparin-separose in 2 M NaCL, 5mM barbital buffer, pH 7.4. To elucidate the lipid-binding regin, LPL was digested with trypsin and then separated by gel filtration. Lipid binding region of LPL has been investigated by recombining LPL peptides with DMPC vesicles. Proteolytic LPL fragments with DMPC were reassembled and stabilized by cholate. Lipid-binding region of LPL was identified by a PTH-automated protein sequencer, as AQQHYPVSAGYTK. The analysis of the secondary structure of the lipid-binding peptides revealed a higher probability of $\alpha$-helix structure compared to the whole LPL protein. The prediction of hydrophobicity of lipid -binding region was highly hydrophobic (-1.1) compared to LPL polypetide(-0.4).

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1996년도 춘계학술대회
• /
• pp.123-125
• /
• 1996

The orientation effect of galactose ligand on hepatocyte attachment was investigated. Poly(N-p-vinyl benzyl-o-${\beta}$-D-galactopyranosyl-D-gluconamide) (PVLA), a ${\beta}$-galactose-carrying styrene homo-polymer, was used as a model ligand for the asialoglycoprotein receptors on hepatocytes. PYVA was transferred onto the poly(${\gamma}$-benzyl L-glutamate)(PBLG) or PBLG/ poly(ethylene glycol)(PEG)/PBLG Langmuir-Blodgett (LB) films as the monolayer level. The dichroic fluorescence values of confocal microscope indicated that the PVLA transferred onto the LB films was located with a preferential orientation of its molecular axes with regard to the direction of the a-helix of polypeptide. Hepatocyte recognized well-oriented galactose moieties of the surface of PVLA through asialoglycoprotein receptors.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2061-2066
• /
• 2007

Recently, ultra-lightweight materials with open, periodic cell structures take much attention owing to its potential for multi-functionality such as load bearing, thermal dissipation, and actuation. This paper presents experimental results on the hydraulic and heat transfer characteristics for the Wire-woven Bulk Kagome(WBK) composed of aluminum 1100 wires. The overall pressure drop and heat transfer of the WBK specimen have been experimentally investigated under forced air convection condition. The pressure loss and heat transfer performance of the aluminum WBK are compared with other heat dissipation media. It was shown that heat transfer depended on relative density and surface area density. Comparison with metal foams and other heat dissipation media such as packed beds, lattice frame materials, louvered fins, and other materials suggests that the aluminum WBK competes favorably with the best available heat dissipation media in heat transfer performance.

• 대한기계학회논문집B
• /
• 제32권1호
• /
• pp.15-22
• /
• 2008

Recently, ultra-lightweight materials with open, periodic cell structures take much attention owing to its potential for multi-functionality such as load bearing, thermal dissipation, and actuation. This paper presents experimental results on the fluid flow and heat transfer characteristics for the Wire-woven Bulk Kagome (WBK) composed of aluminum 1100 wires. The overall pressure drop and heat transfer of the WBK specimen was experimentally investigated under forced air convection condition. The pressure loss and heat transfer performance of the aluminum WBK were compared with other heat dissipation media. It was shown that heat transfer characteristics depended on relative density and surface area density. Comparison with metal foams and other heat dissipation media such as packed beds, lattice frame materials, louvered fins, and others suggests that the aluminum WBK competes favorably with the best available heat dissipation media in heat transfer performance.