• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년 추계학술대회논문집
• /
• pp.302-307
• /
• 2008

The development technology for the helicopter is improved by the increasing of computing power and advanced test facilities. The increasing efficiency of fuel consuming by the developing of improved lift-to-drag rotor system is the major issue, the noise reduction for ecology(civil area) and increase of survivability to reduce noise detection(battlefield) also are important. This investigation shows the classification of helicopter external noise and requirements, the noise flight test methods, the numerical modeling method for aero-acoustic of rotor blade and the result of CAA(Computational Aero-Acoustic) for main rotor blade.

• 소음진동
• /
• 제7권5호
• /
• pp.819-826
• /
• 1997

The finite element analyses of a composite hingeless rotor blade in forward flight have been performed to investigate the influence of blade design parameters on the blade stability. The blade structure is represented by a single cell composite box-beam and its nonclassical effects such as transverse shear and torsion-related warping are considered. The nonlinear periodic differential equations of motion are obtained by moderate deflection beam theory and finite element method based on Hamilton principle. Aerodynamic forces are calculated using the quasi-steady strip theiry with compressibility and reverse flow effects. The coupling effects between the rotor blade and the fuselage are included in a free flight propulsive trim analysis. Damping values are calculated by using the Floquet transition matrix theory from the linearized equations perturbed at equilibrium position of the blade. The aeroelastic results were compared with an alternative analytic approch, and they showed good correlation with each other. Some parametric investigations for the helicopter design variables, such as pretwist and precone angles are carried out to know the aeroelastic behavior of the rotor.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1136-1141
• /
• 2008

The helicopter rotor system generates lift, thrust, maneuvering force and moment to the helicopter with the torque and pitch control force transferred from the main rotor hub/control. And the tail rotor system generates the thrust for yaw axis control of the helicopter with the torque and pitch control force transferred from the tail rotor hub/control. Ground whirl test shall be performed to verify the compliance of requirement performance test and dynamic test of rotor blade and hub/control. This paper describes a design of whirl tower test facility for helicopter rotor system test and evaluation. Design results are summarized and compared with design requirements.

• 한국항공운항학회지
• /
• 제15권3호
• /
• pp.15-23
• /
• 2007

In this paper, we deducted the missions with respect to Korea utility helicopter (KUH) and consist of the scenarios which describe proper purpose of KUH. And so developed fatigue load spectrum of KUH by applying Helix that is fatigue load spectrum for blade of articulated helicopter rotor system. The developed load spectrum is applied to fatigue analysis of blade by modeled finite element with stress-life method (S-N). And we compared the result of fatigue analysis to prior to Helix for the sake of verifying the load spectrum that we generated.

• 항공우주시스템공학회지
• /
• 제1권3호
• /
• pp.26-31
• /
• 2007

This paper addresses a method for structural optimum design of composite rotor blade. The basic model of a composite helicopter main rotor blade is designed and its parameters determining the structural/dynamic properties are studied. Through the investigation of flap/lag/torsional stiffness, the structural properties of the model are analyzed. In this study, helicopter rotor blades are analyzed by using VABS. The computer program VABS (Variational Asymptotic Beam Section Analysis) uses the variational asymptotic method to split a three-dimensional nonlinear elasticity problem into a two dimensional cross-sectional analysis and a one-dimensional nonlinear beam problem. This is accomplished by taking advantage of certain small parameters inherent to beam-like structures. In addition, the rotational stability of the blade is estimated by the frequency diagram from FE analysis(MSC.Patran/Nastran) to understand its vibrational property. From the result, design parameters to determine and optimize the properties of the model are presented.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2007년도 춘계 학술대회논문집
• /
• pp.125-129
• /
• 2007

In this paper a method for the design optimization for helicopter rotor blade in hover is studied Numerical analysis of aerodynamic characteristics of the flow around a rotor blade is analysed by usign panel method and CFD code based on Navier-Stokes equation. The result is validated by comparing with existing experimental result. Optimization methods RSM(Response Surface Method) and DOE(Design of Experiments) are applied in combination. The object functions are power, twist angle, taper ratio, and thrust. The optimized result showed a decrease of 17% of the power required.

• 한국소음진동공학회논문집
• /
• 제14권11호
• /
• pp.1129-1136
• /
• 2004

The structural modification to install a heavy sensor was made at the front extremities of the foreign-produced helicopter operated in the Korea Navy Mounting the sensor directly to the nose structure is unlikely to be practical because it lowers a dynamic mode of the airframe close to rotor blade passing frequencies, leading to increased helicopter vibration. Unfortunately we have no information on dynamic characteristics of the imported helicopter. So the experimental modal model derived from shake testing on the overall airframe of a working helicopter was used to solve the sensor Installation problems. The sensitivity analysis was done to evaluate what the best of modification woo)d be. Simple ID model and experimental modal data for mount system with sensor were Incorporated into overall dynamic model to assess the effects of the sensor installation on helicopter. Modal testing for the modified helicopter shows that the airframe modes are sufficiently displaced from rotor passing frequencies. The mount system has been proven fight to be sufficiently stable to meet vibration-level requirement for all required operational profiles.

• 항공우주기술
• /
• 제11권1호
• /
• pp.185-191
• /
• 2012

본 논문에서는 축소 로터의 성능시험과 축소 헬기 Flight Test Bed 개발이 가능한 헬리콥터 섀시다이나모미터(HCDS)를 개발하여 지상시험을 수행하였다. 축소 헬기는 엔진 출력에 따른 컬렉티브 피치각의 상호 관계로부터 로터의 일정 회전속도에 대한 추력과 동력의 변화를 확인하고, 그 결과로 OGE에서의 정지비행효율(F.M.)이 0.76으로 비행시험 가능성을 점검하였다. 본 헬리콥터 섀시다이나모미터(HCDS) 시험 결과는 축소 헬기 개발과 로터 블레이드의 성능 평가에 활용할 것이다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 추계학술발표대회 논문집
• /
• pp.206-209
• /
• 2001

본 논문에서는 헬리콥터용 힌지없는 로터 시스템의 축소 복합재료 블레이드의 개발 과정을 소개한다. 블레이드 설계에는 자체 보유의 CORDAS 프로그램을 이용하였으며 블레이드 동역학 해석에는 헬리콥터용 해석 프로그램인 Flightlab 상용 프로그램을 이용하였다. 힌지없는 허브에 설계된 복합재료 로터 블레이드를 연결하여 동적 특성을 분석하였으며 그 결과를 이용하여 설계 변경하는 과정을 수행함으로써 최적의 설계값을 구하는 과정을 기술하였다. 효과적인 성형 공법을 정립하여 설계된 축소 복합재료 블레이드를 제작하였다. 본 연구를 통해 복합재료 블레이드 개발 과정에 대한 경험을 축적하였으며 축적된 기술을 관련 분야에 적용할 예정이다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 춘계학술대회논문집
• /
• pp.70-74
• /
• 2009

The helicopter development technology is improved by the increasing of computing power and advanced test facilities. The increasing efficiency of fuel consuming by the developing of improved lift-to-drag rotor system is the major issue, the noise reduction for ecology(civil area) and increase of survivability to reduce noise detection(battlefield) also are important. This investigation shows the helicopter external noise flight test methods, conventional military helicopter's(UH-60) experimental results and the numerical modeling method for aero-acoustic of rotor blade and the result of CAA(Computational Aero-Acoustic) for main rotor blade.