• 한국공간구조학회논문집
• /
• 제18권3호
• /
• pp.125-132
• /
• 2018

The biggest impact on the cladding design of buildings is wind loads. Wind tunnel tests were conducted to examine the applicability of current wind load standards about membrane retractable roof spatial structure. A dome model with a circular shape that is retractable to the center of the dome was made (Opening ratio = 0, 10, 30, 50). In addition, height adjustable turntables were made and tested with five patterns with H/D = 0.1, 0.2, 0.3, 0.4 and 0.5. The maximum wind pressure coefficient and the minimum wind pressure coefficient for the cladding were analyzed and the experimental wind pressure coefficient were compared with the current wind load standards, KBC2016 and AIJ-RLB(2015). The experimental value and the reference value of the enclosed roof were very similar and showed possibility of application, but opened roof case was found that the reference value was underestimated.

• 대한가정학회지
• /
• 제39권11호
• /
• pp.1-14
• /
• 2001

In order to develop a manual of residential alterations for the physically disabled, this case study was accomplished to analyze and evaluate residential environments and residential alterations for physically disabled women. Twenty-nine physically disabled women in Seoul and Kyunggi areas were the subjects of this study. With the evaluation checklist on physical environments of their housing, data on general characteristics of wall, floor, and all features and equipments and spaces of bedroom, kitchen, bathroom, living mom, entrance and balcony were gathered. Also, data on residential alterations were gathered through personal interviews. The data were collected from July 18th to July 25th in 2000. Frequency, percentage, and mean were used to analyze the data. In kitchen, small space, hee space under the sink and heights of the lower cabinets were not properly provided. In bathroom, door width, direction of opening door, adjustable height of shower, level difference, clear space for wheelchair user, and storage place were not appropriate to the disabled. Kitchen and bathroom showed high frequencies of alteration. But most of the subjects were not satisfied with the alterations of their housing. They also wanted to alter these two spaces in the future. In order to after their housing effectively appropriate information of the residential alterations was needed. If a guide or manual book for residential alterations was provided, the physically disabled people will more easily after their housing for safe and independent life.

• 한국실내디자인학회논문집
• /
• 제32호
• /
• pp.82-89
• /
• 2002

This study is focused on the chairs for students, especially, middle school students who grow rapidly compared with other group. We make a certain definite possibilities by the scientific and medical comparison of the approved chair with existing chair about the function of feet-height control & the application of the flexible back. The object of this test is middle & high school student (ratio of gender is the same) in Inchon. And the study types are two. One is to bring a matter and to suggest a design as alternative, the other is to verify propriety of the alternative. The major finding from the research are summarized as follows: 1) K·S standards for existing chairs are not proper to the growth rate of present juveniles, and they don't cope with proactive the discrepancy of growth pace. 2) Existing chairs have caused troubles by using only the fixed back of a chair. This troubles made bad influences on juveniles in a growth period. 3) Even existing chairs can adjust the back of a chair, they can be easily broken , and if they adjusted once, they can't be easily controled. Furthermore, it is Impossible to manage them because of the rust of control parts. 4) In the case of supplying the same sizes of them, juveniles who are different to growth rate respectively, can't accept the chairs. Even supplied adjustable chairs, they cant be ideal types of chairs in Open Classroom mode.

• 한국축산시설환경학회지
• /
• 제12권3호
• /
• pp.151-160
• /
• 2006

For even distribution of liquid manure in the field, a boom nozzle type spreader was designed and studied to determined its suitability for small scale crop production farms. Boom nozzle type spreader was compared in the impact triple nozzle and impact single nozzle type spreader. Spreading uniformity of the boom nozzle type liquid manure spreader showed 5.2% (C.V.) and impact single nozzle type spreader showed 6.9% (C.V.). The spreading uniformity of the impact triple nozzle type spreader was quite uneven, therefore, the spreader could be modified as twin nozzle for spreading in orchard farm. The wheel axle height adjustable type liquid manure spreader has higher the stability and it considered much useful on the hilly agricultural land.

• International journal of advanced smart convergence
• /
• 제11권4호
• /
• pp.129-140
• /
• 2022

The purpose of this study to improve the shoulder wheel that is used frequently during shoulder circumduction exercise in a park, to link the shoulder wheel to a game application comprising various shoulder circumduction exercise and shoulder ROM exercise, and to enjoy the game during the exercises. A step motor was added to the shoulder wheel, and the rotating speed and rotating angle, and rotating direction can be controlled. The shoulder height, different for different people, can be controlled as well, so that any user can use this device. The developed application content includes the game elements, to enjoy the repetitive and boring exercise with fun and interest, and the control to adjust the degree of difficulty. This was to help users heighten their desire to rehabilitate by inducing active participation during repetitive shoulder rehabilitation exercise because the game vests users with intrinsic motivation and immersion. If the shoulder wheel and application contents proposed in this study are used, shoulder diseases can be prevented in advance by performing muscle strengthening exercises required in an aging society. This study is expected to contribute to the field of research related to serious games and rehabilitation.

• 한국농공학회지
• /
• 제17권4호
• /
• pp.3897-3920
• /
• 1975

Since the most of Korean dairy and cattle raising farms are too small to introduce western mechanized farming, it is necessary to develope small size equipments. This study has been carried to develop a rotary mower as on attachment of 8 to 10 horse powertiller which is widely spread in rural area. It will not ony be helpfull for the farmers to harvesting hay grass but also desirable to increase the power tiller utility. The protto type rotary mower designed through the fundamental investigations, has been modified and improved through the field trials, and a series of field tests has been carried to investigate its performance and economic feasibility comparing with existing vailable harvesting equipments. The results are as follows; 1. To increase the stability, two guide wheels are attached to both side of the protto type rotary mower. 2. To prevent the clinging of tall grasses, the vertical driving shafts are covered with cylindrical protectors. 3. The cutting height is adjustable in 8 steps from 2.5 to 20 centimeters by changing the length of guide wheel legs. 4. The practical Critical cutting speed were always higher than theoretical value in both case of single cutting blade and three when the cutting depth was 25 millimeter. 5. The peripheral speed of cutting blade was varied in response to the change of engine speed, mean while the peripheral speed was adequate as it was changhed from 25 to 35 meter per second when the power tiller is operated in proper working ground speed. 6. The time requirement to harvest 10 a were 88.7, 54.6 and 41.4 minutes for the first, second and third stage of ground speed respectively, and because of the difficulty of delivery, it was observed that operating with fourth stage of ground speed was not recomanendable when the grass height is taller than 90 centimeters. 7. The performance of rotary mower were 1.1-1.7, 1.4-4.0, 3.8-11.8 and 7.4-22.0 times of reciprocating mower, portable disc type cutter, hay scythe and ordinary sickle respectively. 8. When the slope exceeds, 20 degree the downward harvesting operation was impossible because of the excessive front end weight, while less than 5 degree of land slope did not effect in field operation. 9. Increased traveling spee caused higher cutting height and slight cutting failure, but seems not to effect to the gross yield, and the efficiency of cutting width were from 83 to 94 precent. 10. Tn rank of economy were rotary mower (3,2 stage operation), reciprocating mower, hay scythe, portable disc type cutter and sickle in order when the annul operation exdeeds 100 hours. From the above results, it is convinced that the protto type rotary mower is good enough to the livestock farmers as a hay harvesting equipment because of its economy, hardiness in operating and its out standing performance and hopefully it will contribute to the extension of Korean livestock farming.

• Journal of Interdisciplinary Genomics
• /
• 제1권2호
• /
• pp.19-22
• /
• 2019

CATCH 22 syndrome is rare genetic disease that has various manifestations. Cervical vertebral anomaly, such as Klippel-Feil anomaly, is frequently observed in the patients with CATCH22 syndrome. We present the case of an 11-year-old female patient with CATCH22 syndrome and Klippel-Feil anomaly who had been treated torticollis using the customized soft neck collar. During the patient's first visit to our clinic, she presented with low ear set, skull deformity, intellectual disability, and tilting of the head to the left by approximately 25 degrees. Imaging studies revealed multisegmental fusion and C3 hemivertebrae of the cervical spine and left thoracic scoliosis at T4 with 50 degrees of Cobb's angle. We instructed passive stretching and applied the customized soft neck collar we invented. The ipsilateral aspect of the neck collar is designed to provide vertical support between the clavicle and mandibular angle and is adjustable in height. The Velcro was attached to the neck collar at the point of contact with the ipsilesional mandibular angle, which provides negative sensory feedback, inducing her to tilt neck to the contralesional side. We applied the neck collar for 2 hours a day. After 1 year of treatment, her neck inclination angle improved from 25 to 10 degrees. Providing negative sensory feedback using the customized soft neck collar can be one of the treatment options of postural management in patients with torticollis in cases of CATCH 22 syndrome combined with Klippel-Feil anomaly.

• PNF and Movement
• /
• 제13권2호
• /
• pp.73-80
• /
• 2015

Purpose: The purpose of this study was to determine the effect of symmetrical-reciprocal pattern of scapula and pelvis exercises using proprioceptive neuromuscular facilitation (PNF) on gait speed and balance in patients with hemiplegia. Methods: Among the adult patients with hemiplegia that were hospitalized at Michuhol Rehabilitation Center after being diagnosed with stroke, 10 that were capable of independent walking for more than five minutes and that understood and cooperated with the therapy and test methods of this research, were selected as subjects. The therapy was implemented based on the concept of PNF, and it was performed on a low mat and a height-adjustable mat, as proscribed by the fundamental procedure for PNF. Symmetrical-reciprocal pattern of scapula and pelvis exercises were applied to the patients in the decubitus position. The therapy scheme included stabilizing reversals, rhythmic stabilization, and a combination of isotonics, rhythmic initiation, and dynamic reversals. To investigate gait speed and body trunk mobility before and after the symmetrical-reciprocal pattern of scapula and pelvis exercises were applied, walking speed for a distance of 10 m was measured and balance was tested based on the Berg-Balance scale test table. The Berg-Balance scale test was performed by one therapist to minimize any error that could occur from the subjective evaluation method used by therapists. Results: Gait speed increased by 8.97 seconds after applying the symmetrical-reciprocal pattern of scapula and pelvis exercises using the concept of PNF, showing a significant difference (p<0.01). However, balance showed no significant difference after the therapy (p>0.14). Conclusion: Exercise therapy that uses the symmetrical-reciprocal pattern of scapula and pelvis with the concept of PNF can be said to be a useful therapeutic technique that can enhance the walking speed of patients with hemiplegia.

• 한국환경복원기술학회지
• /
• 제24권1호
• /
• pp.37-51
• /
• 2021

The purpose of this research is to develop the Habitat Suitability Index (HSI) for habitat environments of Aix galericulata (A. galericulata) and Dendrocopos major (D. major), which tend to inhabit urban environments. A. galericulata and D. major are the keystone species representing the ecosystem of wetlands and forests. Based on the analysis of their urban habitat environments, this study selects artificially adjustable levels of the environmental index in order to produce the HSI model, which can be used when either restoring or creating the urban habitats for these species. To develop the HSI, we conducted field surveys at Jungnangcheon Stream, Changgyeonggung, Jangneung, Bangbae Neighborhood Park, Gildong Ecological Park, and Seodalsan Mountain. These surveys were conducted between April and August 2020, and this period includes the breeding season of both A. galericulata and D. major. Based on our findings from the surveys, we conclude that there are six SI factors for A. galericulata. These include (1) the presence of alluvial islands, (2) waterfront vegetation cover rate, (3) type of aquatic plants for food, (4) size of forest patch, (5) type of trees in nearby forests, and (6) connectivity of waterfront and forest. We also conclude that there are five SI factors for D. major, which include (1) size of forest patch, (2) rate of broadleaf trees in forest patches, (3) type of nesting trees, (4) diameter at breast height (DBH) of nesting trees, and (5) density of dead trees. The result of this research can provide future studies with useful guidance when both (1) comparing the habitat suitability of the target species in different environments and (2) restoring or creating habitats for these species.

• 농업과학연구
• /
• 제50권3호
• /
• pp.373-382
• /
• 2023

The task of sorting and excluding blemished apples and others that lack commercial appeal is currently performed manually by human eye sorting, which not only causes musculoskeletal disorders in workers but also requires a significant amount of time and labor. In this study, an automated apple-sorting machine was developed to prevent musculoskeletal disorders in apple production workers and to streamline the process of sorting blemished and non-marketable apples from the better quality fruit. The apple-sorting machine is composed of an arm-rest, a main body, and a height-adjustable part, and uses object detection through a machine learning technology called 'You Only Look Once (YOLO)' to sort the apples. The machine was initially trained using apple image data, RoboFlow, and Google Colab, and the resulting images were analyzed using Jetson Nano. An algorithm was developed to link the Jetson Nano outputs and the conveyor belt to classify the analyzed apple images. This apple-sorting machine can immediately sort and exclude apples with surface defects, thereby reducing the time needed to sort the fruit and, accordingly, achieving cuts in labor costs. Furthermore, the apple-sorting machine can produce uniform quality sorting with a high level of accuracy compared with the subjective judgment of manual sorting by eye. This is expected to improve the productivity of apple growing operations and increase profitability.